Keremenke98

Do you think this game will work properly even with this error?

I've done what you said and It started burning 'till the end, I burnt a few discs and just now noticed that It still gave me an error, but it just ignored and continued. How will this affect the game, will it work? Here's Kprobe result

You sure that I should keep Online Hypertuning off? It was always on, what difference will it make?

They're the same discs I always use. I don't know, MKM-003-00 if it matters. So I should clear OPC history then do it?

I've been burning successfully for a long time now, and this suddenly started happening. I burnt Skate 3 and Mortal Kombat Komplete edition without a problem, Nba 2k15 and Fifa 15 before that, no problem. And then I tried to burn Destiny and something happened. Usually Online Hyper burning is enabled, and now, when I clicked Write a window popped up saying that IMG Burn advises me to disable Online Hyper burning because of something. Its crucial they said. So I did, and I got failed to read sector. And I believe that next time I had Online Hyper burning enabled and got the same error. Here's my log. ImgBurn.log

So i've written a few discs, they all worked, then the 4. came and it gave me this error. Same discs, everything just like the past discs, ran the game through abgx all green.

I'm about to burn a new game, it got out like yesterday, and I'm about to do it like I do for every game, works well. But now when I press Write this comes up "Experience tells me your drive isn't currently configured for optimal 'overburning' performance. Online HyperTuning should be Disabled. Would you like me to make the necessary changes for you? " What should I do and what does this mean?

When I install the new one, can I switch the Buffer size to 1024 Mib?

I've burned the first GTA V DVD and it worked well, no problems. Than when I started burning the second one, this happened I've attached the log ImgBurn.log

/

Can i use it on Non LiteOn drive?

Nothing?

I 20:43:52 ImgBurn Version 2.5.7.0 started! I 20:43:52 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 20:43:52 Total Physical Memory: 4,193,528 KB - Available: 2,433,268 KB I 20:43:52 Initialising ElbyCDIO... I 20:43:52 ELBYCDIO.DLL - Elaborate Bytes CDRTools - ElbyCDIO DLL - Version 6.0.8.7 I 20:43:52 Searching for SCSI / ATAPI devices... I 20:43:52 -> Drive 1 - Info: ASUS DRW-24B5ST 1.00 (F:) (ATA) I 20:43:52 -> Drive 2 - Info: DTSOFT BDROM 1.05 (G:) (Virtual) I 20:43:52 Found 1 DVD±RW/RAM and 1 BD-ROM! I 20:45:10 Operation Started! I 20:45:10 Source File: C:\Users\Nemke98\Desktop\DMC\complex-dmc.dvd I 20:45:10 Source File Sectors: 4,267,015 (MODE1/2048) I 20:45:10 Source File Size: 8,738,846,720 bytes I 20:45:10 Source File Volume Identifier: DVD_ROM I 20:45:10 Source File Volume Set Identifier: d2ee4000MS UDFBridge I 20:45:10 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 20:45:10 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 20:45:10 Source File File System(s): ISO9660, UDF (1.50) I 20:45:10 Destination Device: [3:0:0] ASUS DRW-24B5ST 1.00 (F:) (ATA) I 20:45:10 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 20:45:10 Destination Media Supported Write Speeds: 4x, 6x, 8x I 20:45:10 Destination Media Sectors: 4,267,040 I 20:45:10 Write Mode: DVD I 20:45:10 Write Type: DAO I 20:45:10 Write Speed: 4x I 20:45:10 DVD+R DL Reserve Track: No I 20:45:10 Link Size: Auto I 20:45:10 Lock Volume: Yes I 20:45:10 Test Mode: No I 20:45:10 OPC: No I 20:45:10 BURN-Proof: Enabled I 20:45:10 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 20:45:10 Optimal L0 Data Zone Capacity: 2,133,520 I 20:45:10 Optimal L0 Data Zone Method: Copied From Original Disc I 20:45:40 Set L0 Data Zone Capacity Succeeded! I 20:45:41 Filling Buffer... (512 MB) I 20:45:46 Writing LeadIn... I 20:45:47 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 20:45:47 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 20:45:47 Writing Layer 0... (LBA: 0 - 2133519) I 20:58:53 Writing Layer 1... (LBA: 2133520 - 4267014) I 21:12:16 Synchronising Cache... I 21:12:21 Closing Track... I 21:12:22 Finalising Disc... I 21:12:56 Exporting Graph Data... I 21:12:56 Graph Data File: C:\Users\Nemke98\AppData\Roaming\ImgBurn\Graph Data Files\ASUS_DRW-24B5ST_1.00_THURSDAY-MARCH-14-2013_8-45_PM_MKM-003-00_4x.ibg I 21:12:56 Export Successfully Completed! I 21:12:56 Operation Successfully Completed! - Duration: 00:27:46 I 21:12:56 Average Write Rate: 5,374 KB/s (3.9x) - Maximum Write Rate: 5,633 KB/s (4.1x) I 21:12:56 Cycling Tray before Verify... W 21:13:03 Waiting for device to become ready... I 21:13:15 Device Ready! I 21:13:15 Operation Started! I 21:13:15 Source Device: [3:0:0] ASUS DRW-24B5ST 1.00 (F:) (ATA) I 21:13:15 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00) I 21:13:15 Source Media Supported Write Speeds: 4x, 6x, 8x I 21:13:15 Image File: C:\Users\Nemke98\Desktop\DMC\complex-dmc.dvd I 21:13:15 Image File Sectors: 4,267,015 (MODE1/2048) I 21:13:15 Image File Size: 8,738,846,720 bytes I 21:13:15 Image File Volume Identifier: DVD_ROM I 21:13:15 Image File Volume Set Identifier: d2ee4000MS UDFBridge I 21:13:15 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 21:13:15 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 21:13:15 Image File File System(s): ISO9660, UDF (1.50) I 21:13:15 Read Speed (Data/Audio): MAX / MAX I 21:13:17 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 21:13:17 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 21:13:17 Verifying Layer 0... (LBA: 0 - 2133519) I 21:19:38 Verifying Layer 1... (LBA: 2133520 - 4267014) I 21:25:57 Exporting Graph Data... I 21:25:57 Graph Data File: C:\Users\Nemke98\AppData\Roaming\ImgBurn\Graph Data Files\ASUS_DRW-24B5ST_1.00_THURSDAY-MARCH-14-2013_8-45_PM_MKM-003-00_4x.ibg I 21:25:57 Export Successfully Completed! I 21:25:57 Operation Successfully Completed! - Duration: 00:12:40 I 21:25:57 Average Verify Rate: 11,258 KB/s (8.1x) - Maximum Verify Rate: 16,400 KB/s (11.8x) I 21:38:16 Close Request Acknowledged I 21:38:16 Closing Down... I 21:38:16 Shutting down ElbyCDIO... I 21:38:16 ImgBurn closed! No Kprobe result.I dont know how to use it

I burned DmC with Imgburn, it was sucessful, it all passed well, Dmc trhou abgx all green, I used BurnerMax no probs. But when i play the game, I get Unreadable disc's all the time.Like i play, finish a mission, i get unreadable disc, so i continue the game, after another mission or not even a whole mission, few cutscenes, I get another.Its getting annoying.If i just burn another time, will this go away? Or do i need to do something else