greenystore

Sorry, but i don't see them. Maybe because i did it in "Windows safe mode"?

I see only last one, but that wasn't for game. Can i see more than one?

Shit, i didn't save the notepad text (just empty file) and i run out of discs. Does these logs saves somewhere on my pc, so i could copy? If not i will wait for new disc order and then i will post successful log. But this time i did order from somewhere else, however they might be the same discs that are 3 times cheaper then from Singapure with ID MKM-003. Can you post a link where from you order? I found place cheaper then i can find on Ebay or Amazon.

I think you don't understand me. I do understand that different drive and media should produce different results, but i'm saying that problem is NOT in my drive nor the discs. I'm not saying "It once worked". I'm saying it worked 100+ times with success rate about 19/20. I repeat my drive and media works just fine and problem is somewhere else. "If you're concerned something is messing with your burns, boot into safe mode and see if your drive still errors out burning those discs. " <--- Well that was the best advice you gave me. Thank you so much! It did work. and i did burn successfully 3 more games, 5 discs. So i guess i will need to reinstall Windows, so i could do it in normal mode not just safe mode. BTW, i also did uncheck "Verify" and "Perform OPC before write". So i was right, i have some virus or stg that causes errors and my media and discs are good. Here is the log.

Sorry, i'm not ignoring what you say. I take your advice, however i am sure that it can be done with pc and discs i have, because as i said, i did it 100+ times, with older ImgBurn version and not using default settings, and i'm sure it can be done again with the same drive, media and your wonderful program. Maybe there is some kind of virus that is preventing from successful burning or something else. I don't know and i'm not blaming you for my problem, i'm just saying that i know it can be done without buying new drive nor media as before. Sorry if i offended you. Could you please give me the links?

Well, thank you for your advice and time, however i am sure that problem is somewhere else not the discs nor drive, because as i said i have been successfully burning so many games with the same pc and discs, so problem is not there. Could you please post link where you buy cheap discs and where i can download older ImgBurn version?

So you think that i need to change drive and discs? Even if i guarantee that i been using this pc and the same discs for very long time with no problems. Games like GTA5, Far cry 4 with 0 problem.

I'm not trying to convince anyone that these are the same discs. I'm just saying that i also have Verbatrim DVD+R DL. I don't know how it works, but few years ago it did solve some problems. I know that my hardwire works with these discs, because i did burn 100+ games before. Even did the same game, other disc and then the error. So i tried to burn with default settings. This time error at about 35%. Here is the log. I 22:31:11 ImgBurn Version 2.5.8.0 started! I 22:31:11 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 22:31:11 Total Physical Memory: 3 857 112 KiB - Available: 2 170 380 KiB I 22:31:11 Initialising SPTI... I 22:31:11 Searching for SCSI / ATAPI devices... I 22:31:11 -> Drive 1 - Info: DTSOFT BDROM 1.05 (F:) (Virtual) I 22:31:13 -> Drive 2 - Info: HL-DT-ST DVDRAM GT32N 1.00 (E:) (ATAPI) I 22:31:13 Found 1 DVD±RW/RAM and 1 BD-ROM! W 22:33:10 User accepted disc space warning and is attempting to truncate! I 22:33:10 Operation Started! I 22:33:10 Source File: D:\downloads\Sniper.Elite.III.XBOX360-COMPLEX\complex-sniper.elite.3.dvd I 22:33:10 Source File Sectors: 4 267 015 (MODE1/2048) I 22:33:10 Source File Size: 8 738 846 720 bytes I 22:33:10 Source File Volume Identifier: DVD_ROM I 22:33:10 Source File Volume Set Identifier: 46f44000MS UDFBridge I 22:33:10 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 22:33:10 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 22:33:10 Source File File System(s): ISO9660; UDF (1.50) I 22:33:10 Destination Device: [0:1:0] HL-DT-ST DVDRAM GT32N 1.00 (E:) (ATAPI) I 22:33:10 Destination Media Type: DVD+R DL (Disc ID: UMEDISC-DL1-64) I 22:33:10 Destination Media Supported Write Speeds: 2,4x; 4x; 6x I 22:33:10 Destination Media Sectors: 4 173 824 I 22:33:10 Destination Media L0 Data Zone Capacity: 2 086 912 (Changeable: Yes) I 22:33:10 Write Mode: DVD I 22:33:10 Write Type: DAO I 22:33:10 Write Speed: 4x I 22:33:10 DVD+R DL Reserve Track: No I 22:33:10 Link Size: Auto I 22:33:10 Lock Volume: Yes I 22:33:10 Test Mode: No I 22:33:10 OPC: No I 22:33:10 BURN-Proof: Enabled I 22:33:10 Write Speed Successfully Set! - Effective: 5 540 KB/s (4x) I 22:33:10 Book Type Setting: N/A (Reason: Invalid Command Operation Code) W 22:33:10 Optimal layer break position exceeds L0 capacity. W 22:33:10 Optimal L0 Sectors: 2 133 520 W 22:33:10 Maximum L0 Sectors: 2 086 912 I 22:33:10 Optimal L0 Data Zone Capacity: 2 133 520 I 22:33:10 Optimal L0 Data Zone Method: Copied From Original Disc W 22:33:10 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB I 22:33:10 L0 Data Zone Capacity - Effective: 2 086 912 I 22:33:12 Filling Buffer... (80 MiB) I 22:33:15 Writing LeadIn... I 22:33:50 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 22:33:50 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 22:33:50 Writing Layer 0... (LBA: 0 - 2086911) W 22:44:28 Failed to Write Sectors 1464096 - 1464127 - Reason: Write Error W 22:44:28 Retrying (1 of 20)... W 22:44:28 Retry Failed - Reason: No Seek Complete W 22:44:28 Retrying (2 of 20)... W 22:44:28 Retry Failed - Reason: Invalid Address For Write W 22:44:28 Retrying (3 of 20)... W 22:44:28 Retry Failed - Reason: Invalid Address For Write W 22:44:28 Retrying (4 of 20)... W 22:44:28 Retry Failed - Reason: Invalid Address For Write W 22:44:28 Retrying (5 of 20)... W 22:44:28 Retry Failed - Reason: Invalid Address For Write W 22:44:28 Retrying (6 of 20)... W 22:44:28 Retry Failed - Reason: Invalid Address For Write W 22:44:28 Retrying (7 of 20)... W 22:44:28 Retry Failed - Reason: Invalid Address For Write W 22:44:28 Retrying (8 of 20)... W 22:44:28 Retry Failed - Reason: Invalid Address For Write W 22:44:28 Retrying (9 of 20)... W 22:44:28 Retry Failed - Reason: Invalid Address For Write W 22:44:28 Retrying (10 of 20)... W 22:44:28 Retry Failed - Reason: Invalid Address For Write W 22:44:28 Retrying (11 of 20)... W 22:44:28 Retry Failed - Reason: Invalid Address For Write W 22:44:28 Retrying (12 of 20)... W 22:44:28 Retry Failed - Reason: Invalid Address For Write W 22:44:28 Retrying (13 of 20)... W 22:44:28 Retry Failed - Reason: Invalid Address For Write W 22:44:28 Retrying (14 of 20)... W 22:44:28 Retry Failed - Reason: Invalid Address For Write W 22:44:28 Retrying (15 of 20)... W 22:44:28 Retry Failed - Reason: Invalid Address For Write W 22:44:28 Retrying (16 of 20)... W 22:44:28 Retry Failed - Reason: Invalid Address For Write W 22:44:28 Retrying (17 of 20)... W 22:44:28 Retry Failed - Reason: Invalid Address For Write W 22:44:28 Retrying (18 of 20)... W 22:44:28 Retry Failed - Reason: Invalid Address For Write W 22:44:28 Retrying (19 of 20)... W 22:44:28 Retry Failed - Reason: Invalid Address For Write W 22:44:28 Retrying (20 of 20)... W 22:44:28 Retry Failed - Reason: Invalid Address For Write E 22:45:20 Failed to Write Sectors 1464096 - 1464127 - Reason: Write Error E 22:45:20 Next Writable Address: 0 I 22:45:21 Synchronising Cache... W 22:45:24 User opted to skip the 'Close Track/Session/Disc' functions. E 22:45:24 Failed to Write Image! I 22:45:24 Exporting Graph Data... I 22:45:24 Graph Data File: C:\Users\Chris\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GT32N_1.00_OTRDIENA-2015-GADA-5-MAIJS_22-33_UMEDISC-DL1-64_4x.ibg I 22:45:24 Export Successfully Completed! E 22:45:24 Operation Failed! - Duration: 00:12:13 I 22:45:24 Average Write Rate: 4 243 KiB/s (3.1x) - Maximum Write Rate: 5 446 KiB/s (4.0x)

I know that MKM-003-00 discs are only ones that are recommended. I'm just saying that that my discs are also Verbatrim DVD+R DL, but the ID is different because they are from different factory not Singapure's. The same company made them with the same tehnologies, but in different factory location. And i can guarantee that they did work just great with no problems. As an example these: http://www.ebay.com/itm/10-pack-Verbatim-DVD-R-DL-8X-Dual-Layer-Printable-8-5GB-Double-Dual-Layer-D9-/261845058593?pt=LH_DefaultDomain_0&hash=item3cf72e8421 http://www.ebay.com/itm/10-pack-Verbatim-balnk-printable-DVD-R-DL-8X-Dual-Layer-10-Discs-DVD-R-dl-8-5GB-/391080194920?pt=LH_DefaultDomain_0&hash=item5b0e323368 Hmm, okey i did reinstall ImgBurn, so i now have default settings, however they didn't work for me before. Should i even leave "Verify" and "Perform OPC Before Write" checked as they are?

Hmm, could you post where to find default settings? I don't know because so many people claim to post "default" settings for XGD3. Yes, my disks are also Verbarim DVD+R DL, but they ar not Singapure ones so they have different ID. Okey, i will try to do with "calculate optimal" for layer brake when i will switch to default settings. Gardware is good enough. I know it because it's testen on 100+ xbox games including XGD3. I found this very weird and maybe it's important for software developers - 2 days before this error first found me when i did burn Battlefield Hardline CD1. After that i did try to burn CD2 with the same PC, settings and did burn successfully like the many other games before. But now the error gets up with every disks and every game (did try 3 different) So my next steps will be, to get right default settings after i re install ImgBurn, will try to set to "Calculate Optional" and will post the results. Please send me the link to right "default" settings.

Sorry for that. I just didn't wanted to post logs, because they are different depending on what PC i use, ImgBurn settings, program version and writing speed. Here is log from PC that i used most often and i chosen newest version of ImgBurn so no one would need to spend the time to comments that i need to upgrade my ImgBurn. I 11:22:51 ImgBurn Version 2.5.8.0 started! I 11:22:51 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 11:22:51 Total Physical Memory: 3 857 112 KiB - Available: 2 137 336 KiB I 11:22:51 Initialising SPTI... I 11:22:51 Searching for SCSI / ATAPI devices... I 11:22:51 -> Drive 1 - Info: DTSOFT BDROM 1.05 (F:) (Virtual) I 11:22:52 -> Drive 2 - Info: HL-DT-ST DVDRAM GT32N 1.00 (E:) (ATAPI) I 11:22:52 Found 1 DVD±RW/RAM and 1 BD-ROM! W 11:30:18 User accepted disc space warning and is attempting to truncate! I 11:30:18 Operation Started! I 11:30:18 Source File: D:\downloads\Battlefield Hardline\DVD2\Battlefield Hardline2.dvd I 11:30:18 Source File Sectors: 4 267 015 (MODE1/2048) I 11:30:18 Source File Size: 8 738 846 720 bytes I 11:30:18 Source File Volume Identifier: DVD_ROM I 11:30:18 Source File Volume Set Identifier: 58d5c000MS UDFBridge I 11:30:18 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 11:30:18 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 11:30:18 Source File File System(s): ISO9660; UDF (1.50) I 11:30:18 Destination Device: [0:1:0] HL-DT-ST DVDRAM GT32N 1.00 (E:) (ATAPI) I 11:30:18 Destination Media Type: DVD+R DL (Disc ID: UMEDISC-DL1-64) I 11:30:18 Destination Media Supported Write Speeds: 2,4x; 4x; 6x I 11:30:18 Destination Media Sectors: 4 173 824 I 11:30:18 Destination Media L0 Data Zone Capacity: 2 086 912 (Changeable: Yes) I 11:30:18 Write Mode: DVD I 11:30:18 Write Type: DAO I 11:30:18 Write Speed: 4x I 11:30:18 DVD+R DL Reserve Track: No I 11:30:18 Link Size: Auto I 11:30:18 Lock Volume: Yes I 11:30:18 Test Mode: No I 11:30:18 OPC: No I 11:30:18 BURN-Proof: Enabled I 11:30:18 Write Speed Successfully Set! - Effective: 5 540 KB/s (4x) I 11:30:18 Book Type Setting: N/A (Reason: Invalid Command Operation Code) W 11:30:18 User specified layer break position exceeds L0 capacity. W 11:30:18 User Specified L0 Sectors: 2 133 520 W 11:30:18 Maximum L0 Sectors: 2 086 912 I 11:30:18 User Specified L0 Data Zone Capacity: 2 133 520 W 11:30:18 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB I 11:30:18 L0 Data Zone Capacity - Effective: 2 086 912 I 11:30:19 Filling Buffer... (73 MiB) I 11:30:21 Writing LeadIn... I 11:30:56 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 11:30:56 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 11:30:56 Writing Layer 0... (LBA: 0 - 2086911) W 11:42:35 Failed to Write Sectors 1546912 - 1546943 - Reason: Write Error W 11:42:35 Retrying (1 of 20)... W 11:42:35 Retry Failed - Reason: No Seek Complete W 11:42:35 Retrying (2 of 20)... W 11:42:35 Retry Failed - Reason: Invalid Address For Write W 11:42:35 Retrying (3 of 20)... W 11:42:35 Retry Failed - Reason: Invalid Address For Write W 11:42:35 Retrying (4 of 20)... W 11:42:35 Retry Failed - Reason: Invalid Address For Write W 11:42:35 Retrying (5 of 20)... W 11:42:35 Retry Failed - Reason: Invalid Address For Write W 11:42:35 Retrying (6 of 20)... W 11:42:35 Retry Failed - Reason: Invalid Address For Write W 11:42:35 Retrying (7 of 20)... W 11:42:35 Retry Failed - Reason: Invalid Address For Write W 11:42:35 Retrying (8 of 20)... W 11:42:35 Retry Failed - Reason: Invalid Address For Write W 11:42:35 Retrying (9 of 20)... W 11:42:35 Retry Failed - Reason: Invalid Address For Write W 11:42:35 Retrying (10 of 20)... W 11:42:35 Retry Failed - Reason: Invalid Address For Write W 11:42:35 Retrying (11 of 20)... W 11:42:35 Retry Failed - Reason: Invalid Address For Write W 11:42:35 Retrying (12 of 20)... W 11:42:35 Retry Failed - Reason: Invalid Address For Write W 11:42:35 Retrying (13 of 20)... W 11:42:35 Retry Failed - Reason: Invalid Address For Write W 11:42:35 Retrying (14 of 20)... W 11:42:35 Retry Failed - Reason: Invalid Address For Write W 11:42:35 Retrying (15 of 20)... W 11:42:35 Retry Failed - Reason: Invalid Address For Write W 11:42:35 Retrying (16 of 20)... W 11:42:35 Retry Failed - Reason: Invalid Address For Write W 11:42:35 Retrying (17 of 20)... W 11:42:35 Retry Failed - Reason: Invalid Address For Write W 11:42:35 Retrying (18 of 20)... W 11:42:35 Retry Failed - Reason: Invalid Address For Write W 11:42:35 Retrying (19 of 20)... W 11:42:35 Retry Failed - Reason: Invalid Address For Write W 11:42:35 Retrying (20 of 20)... W 11:42:35 Retry Failed - Reason: Invalid Address For Write E 11:46:47 Failed to Write Sectors 1546912 - 1546943 - Reason: Write Error E 11:46:47 Next Writable Address: 0 I 11:46:47 Synchronising Cache... W 11:47:02 User opted to skip the 'Close Track/Session/Disc' functions. E 11:47:02 Failed to Write Image! I 11:47:02 Exporting Graph Data... I 11:47:02 Graph Data File: C:\Users\Chris\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GT32N_1.00_OTRDIENA-2015-GADA-5-MAIJS_11-30_UMEDISC-DL1-64_4x.ibg I 11:47:02 Export Successfully Completed! E 11:47:02 Operation Failed! - Duration: 00:16:43 I 11:47:02 Average Write Rate: 3 253 KiB/s (2.4x) - Maximum Write Rate: 5 444 KiB/s (4.0x)

Hey, so i have been useing ImgBurn for xbox discs and everything was great until i had this I/O error some while ago, when i downloaded the new ImgBurn. I did try different settings and everything i found in different forums, but nothing did work. Some "specialists" were saying that my drive is dead and i need to buy new one, however i didn't believe them. I found one post that said i just need to USE older version of ImgBurn and that worked. I was able to install 10 of 10 games again just for that advice until yesterday when I/O error found me again, but now on the older ImgBurn version. Now i failed to write about 15 disks (3 different games, tried to redownload games) and i don't know what could be the problem. I tried using different settings (for example changing MB amount at buffering size, choosing turnicate and overburn and others), speeds (2x; 2,4x; 4x) and there is three % at which my ImgBurn fails with I/O error - At 0%, at 20%, or at 46-50%(the most) so the error logs are different most of the times. I'm using only Verbatrim DVD+R DL disks My task manager is clear and ImgBurn set to "High priority", nothing is running at the same time. I'm talking about XGD3 games. My burner's firmware is okey. "Verify" and "Perform OPC Before Write" is unchecked. Did try to clean drive and discs from dust. Did try to use 3 different computers, but even two of them did work before and one i have tried to use for first time, now none of them works. I do use Abgx360 before running ImgBurn. Abgx360 is running fine, no problems. Please help me to resolve the problem. And please don't say that i need to buy new drive, because i believe that is not the problem.