Jump to content

h0ky539

Members
  • Posts

    7
  • Joined

  • Last visited

Everything posted by h0ky539

  1. FFS !! The Pioneer BD-RW is now giving me grief. The disc write process (apparently) goes along without issue, it's just the read back that's a source of trouble. Got it in June & burnt about 20 25gb bdrs. Now it has decided to totally lock the system up during verify. This happens within the first few minutes of the verify op starting. Everything is locked, inc mouse & KB - cannot even get caps lock to switch on/off! This also occurs when using a disc tester like VSO Inspector. I need to reset or power off the PC to get access. Makes me wonder if anyone does bdrw diagnostic test software. Anyone have any thoughts on this ? Here's a log, I've tried @4x & 6x with similar early sector read failure on verify/read ops. I 17:06:36 ImgBurn Version 2.5.8.0 started! I 17:06:36 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 17:06:36 Total Physical Memory: 16,675,396 KiB - Available: 13,446,448 KiB I 17:06:36 Initialising SPTI... I 17:06:36 Searching for SCSI / ATAPI devices... I 17:06:36 -> Drive 1 - Info: DiscSoft Virtual 1.0 (S:) (Virtual) I 17:06:36 -> Drive 2 - Info: DiscSoft Virtual 1.0 (J:) (Virtual) I 17:06:36 -> Drive 3 - Info: PIONEER BD-RW BDR-209M 1.30-ID60 (I:) (ATA) I 17:06:37 -> Drive 4 - Info: TSSTcorp CDDVDW SH-224DB SB01 (H:) (ATA) I 17:06:37 Found 1 DVD±RW/RAM, 2 BD-ROM XLs and 1 BD-RE XL! I 17:06:47 Project Successfully Loaded! I 17:06:47 File Name: C:\Users\__________.ibb I 17:07:39 Operation Started! I 17:07:39 Building Image Tree... I 17:07:39 Calculating Totals... I 17:07:39 Preparing Image... I 17:07:40 Contents: 1,937 Files, 11 Folders I 17:07:40 Content Type: Data I 17:07:40 Data Type: MODE1/2048 I 17:07:40 File System(s): UDF (1.02) I 17:07:40 Volume Label: - I 17:07:40 Size: 24,991,539,455 bytes I 17:07:40 Sectors: 12,204,172 I 17:07:40 Image Size: 24,998,838,272 bytes I 17:07:40 Image Sectors: 12,206,464 I 17:07:42 Operation Successfully Completed! - Duration: 00:00:02 I 17:07:42 Operation Started! I 17:07:42 Source File: -==/\/[BUILD IMAGE]\/\==- I 17:07:42 Source File Sectors: 12,206,464 (MODE1/2048) I 17:07:42 Source File Size: 24,998,838,272 bytes I 17:07:42 Source File Volume Identifier: - I 17:07:42 Source File Volume Set Identifier: 494B88F300BA4175 I 17:07:42 Source File Application Identifier: ImgBurn v2.5.8.0 I 17:07:42 Source File Implementation Identifier: ImgBurn I 17:07:42 Source File File System(s): UDF (1.02) I 17:07:42 Destination Device: [0:1:0] PIONEER BD-RW BDR-209M 1.30 (I:) (ATA) I 17:07:42 Destination Media Type: BD-R (Disc ID: CMCMAG-BA5-000) I 17:07:42 Destination Media Supported Write Speeds: 2x, 4x, 6x, 8x, 10x, 12x I 17:07:42 Destination Media Sectors: 12,219,392 I 17:07:42 Write Mode: BD I 17:07:42 Write Type: DAO I 17:07:42 Write Speed: 4x I 17:07:42 Hardware Defect Management Active: No I 17:07:42 BD-R Verify Not Required: Yes I 17:07:42 Link Size: Auto I 17:07:42 Lock Volume: Yes I 17:07:42 Test Mode: No I 17:07:42 OPC: Yes I 17:07:42 BURN-Proof: Enabled I 17:07:43 Write Speed Successfully Set! - Effective: 17,980 KB/s (4x) I 17:07:43 Advanced Settings - Optimal Writing Speed: No I 17:07:59 Filling Buffer... (80 MiB) I 17:08:04 Writing LeadIn... I 17:08:05 Writing Session 1 of 1... (1 Track, LBA: 0 - 12206463) I 17:08:06 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 12206463) I 17:31:34 Synchronising Cache... I 17:31:35 Closing Track... I 17:31:36 Finalising Disc... I 17:31:51 Exporting Graph Data... I 17:31:51 Graph Data File: C:\Users\__\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-209M_1.30_11-OCTOBER-2016_17-07_CMCMAG-BA5-000_4x.ibg I 17:31:51 Export Successfully Completed! I 17:31:51 Operation Successfully Completed! - Duration: 00:24:09 I 17:31:51 Average Write Rate: 17,338 KiB/s (3.9x) - Maximum Write Rate: 18,981 KiB/s (4.3x) I 17:31:51 Cycling Tray before Verify... I 17:32:07 Device Ready! I 17:32:08 Operation Started! I 17:32:08 Source Device: [0:1:0] PIONEER BD-RW BDR-209M 1.30 (I:) (ATA) I 17:32:09 Source Media Type: BD-R (Disc ID: CMCMAG-BA5-000) I 17:32:09 Source Media Supported Read Speeds: 12x I 17:32:09 Source Media Supported Write Speeds: 2x, 4x, 6x, 8x, 10x, 12x I 17:32:09 Source Media Sectors: 12,206,464 I 17:32:09 Source Media Size: 24,998,838,272 bytes I 17:32:09 Image File: -==/\/[BUILD IMAGE]\/\==- I 17:32:09 Image File Sectors: 12,206,464 (MODE1/2048) I 17:32:09 Image File Size: 24,998,838,272 bytes I 17:32:09 Image File Volume Identifier: - I 17:32:09 Image File Volume Set Identifier: 494B88F300BA4175 I 17:32:09 Image File Application Identifier: ImgBurn v2.5.8.0 I 17:32:09 Image File Implementation Identifier: ImgBurn I 17:32:09 Image File File System(s): UDF (1.02) I 17:32:09 Read Speed (Data/Audio): MAX / MAX I 17:32:10 Read Speed - Effective: 5x - 12x I 17:32:10 Verifying Session 1 of 1... (1 Track, LBA: 0 - 12206463) I 17:32:10 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 12206463) W 17:32:12 Failed to Read Sectors 64 - 95 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x07) W 17:32:12 Failed to Read Sectors 256 - 287 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x07) W 17:32:12 Failed to Read Sector 317 - Reason: Synchronous Data Transfer Error W 17:36:34 Retrying (1)... I 17:36:34 Verifying Sectors... W 17:36:34 Failed to Read Sector 325 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x07) W 17:36:36 Failed to Read Sector 329 - Reason: Synchronous Data Transfer Error W 17:36:36 Failed to Read Sectors 400 - 431 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x07) W 17:36:36 Failed to Read Sector 436 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x07) W 17:36:37 Failed to Read Sectors 896 - 927 - Reason: Synchronous Data Transfer Error W 17:36:37 Failed to Read Sector 930 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x07) E 17:36:39 Failed to Read Sector 930 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x07) E 17:36:39 Failed to Verify Sectors! I 17:36:40 Exporting Graph Data... I 17:36:40 Graph Data File: C:\Users\-\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-209M_1.30_11-OCTOBER-2016_17-07_CMCMAG-BA5-000_4x.ibg I 17:36:40 Export Successfully Completed! E 17:36:40 Operation Failed! - Duration: 00:04:30 I 17:36:40 Average Verify Rate: 6 KiB/s (0.0x) - Maximum Verify Rate: 6 KiB/s (0.0x)
  2. I got the drive & burnt a BD, then tried reading an LG burnt BD & it all worked . So far so good. Feels like a better built unit than the LG & the read / seek times seem more stable there is no periods of hunting with the thing spinning up & the head racing back & forth as there was on the LG. Funny you mentioned that firmware! I looked at the 1.34 fw update, mine is currently 1.30, looked at the change log & thought hmmmmm this looks a bit dubious. I've downloaded it but not used it yet. Hearing your info I think I will leave it alone, one duff BDRW is enuf! Thanks for confirming my suspicion! Is your Asus-usb the Asus (BW-12D1S-U) External? I looked at those before taking another internal, looks good & it seemed to have good reviews so far.
  3. Thanks for the reply. My main complaint on that LG was the number of discs burnt, at less than 1 per week, that really sux. If I had burnt a disc a day I could at least say I'd had fair use out of it. When did DVDRW or CDRW only survive such a small batch before dying? I had an LG DVDRW way back, & that lasted over 6 years & must have burnt up to 1k dvds in that time. I did see that reading back BDs it had written sometimes took a while for initializing the first dir read - maybe upto 20secs? to read the tree. Not great. I will not be trying LG again & have just ordered a Pioneer BDR-209EBK Will see how that goes.
  4. Well, after a few more hours messing about & swapping cables etc I managed to trash a few more discs & now the BDRW reads nothing at all, just sits there spinning & seeking. VERY at LG, this is 18mths old & has burnt 72 of the verb. discs inc 8 I just trashed. Only used for archiving & not for reading/making images so I think that was a really bad MTBF rating! Is this widely known as a low life-span drive? Thanks again for the assistance, LIGHTNING UK!
  5. I put the BDRW on the very last header/port, which can be set to IDE. Tried it yesterday & it didn't like it. The weird thing is that it has been working for about 15 months on the AHCI BIOS setting. Will try safe mode in a bit Thanks
  6. Thanks for the rapid reply! Here is the log I 16:00:49 Device: [4:0:0] HL-DT-ST BD-RE BH16NS40 1.03 (I:) (SATA) I 16:00:49 Family Tree: I 16:00:49 -> ACPI x64-based PC I 16:00:49 -> Microsoft ACPI-Compliant System I 16:00:49 -> PCI bus I 16:00:49 -> Standard AHCI 1.0 Serial ATA Controller (VEN_1002&DEV_4391 - ATI - msahci - v6.1.7601.18231) I 16:00:49 -> IDE Channel (ATA Channel 5) I 16:00:49 -> CD-ROM Drive (HL-DT-ST BD-RE BH16NS40 ATA Device) (Channel 5, Target 0, Lun 0) I have a AMD 970 mobo & I removed the AMD SATA driver yesterday & let W7 use it's own generic stuff to see if it would make a difference - it hasn't.
  7. Reason I'm posting here is because Imgburns verify is less successful than that of VSO Inspector - I have had to cancel IBs verification several times as it cannot advance regardless of 'retry/continue' & use the VSO prog. Nevertheless I suspect that there may be an issue with the drive or the media not imgburn. Using a HL-DT-ST BD-RE BH16NS40 1.03-A0 (latest FW) & Verbatim SL 25gb BD-R (Disc ID: CMCMAG-BA5-000) I have recently started getting issues with burns giving me a variety of check condition errors e.g. Power On, Reset, or Bus Device Reset Occurred; Device not ready etc. I'm burning @4x, sometimes the burn will halt with a check device condition; device not ready, msg normally this will occur after 50% of burn is made. If the burn completes when verification is run it tends to hang or stop with errors around the 80% area (78%, 84% 86% etc). I put VSO Inspector on to see if that would read the discs & it does & shows some areas of imperfection - surface scan req's can multiple tries & file scan detects unreadable files, read speeds also tank at the same areas. When running multiple successive ops e.g. - burn/verify; verify; verify; the drive can sometimes disappear from the device list & I need to rescan in DevMan to get it back. With DevMan open it doesn't appear to drop from the DVD\CD-ROM Drives list burning burn/verify, but it may afterwards. I can hit rescan during a halt condition dialog & the entries remain. Overheating? The verify process can take a long time, I had one @1hr+ for 25gb. Any of the resident experts know/guess if this is a dying drive or just a bad media batch? I 11:48:17 ImgBurn Version 2.5.8.0 started! I 11:48:17 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 11:48:17 Total Physical Memory: 16,675,416 KiB - Available: 12,696,764 KiB I 11:48:17 Initialising SPTI... I 11:48:17 Searching for SCSI / ATAPI devices... I 11:48:17 -> Drive 1 - Info: DiscSoft Virtual 1.0 (R:) (Virtual) I 11:48:18 -> Drive 2 - Info: HL-DT-ST BD-RE BH16NS40 1.03-A0 (I:) (SATA) I 11:48:18 -> Drive 3 - Info: TSSTcorp CDDVDW SH-224DB SB01 (H:) (SATA) I 11:48:18 Found 1 DVD±RW/RAM, 1 BD-ROM XL and 1 BD-RE XL! I 11:48:30 Project Successfully Loaded! I 11:48:30 File Name: C:\Users\\AppData\Roaming\ImgBurn\Project Files\Disc.ibb I 11:48:42 Operation Started! I 11:48:42 Building Image Tree... I 11:48:42 Calculating Totals... I 11:48:43 Preparing Image... I 11:48:43 Contents: 1,897 Files, 5 Folders I 11:48:43 Content Type: Data I 11:48:43 Data Type: MODE1/2048 I 11:48:43 File System(s): UDF (1.02) I 11:48:43 Volume Label: Disc I 11:48:43 Size: 25,011,836,163 bytes I 11:48:43 Sectors: 12,214,061 I 11:48:43 Image Size: 25,019,023,360 bytes I 11:48:43 Image Sectors: 12,216,320 I 11:48:45 Operation Successfully Completed! - Duration: 00:00:02 I 11:48:45 Operation Started! I 11:48:45 Source File: -==/\/[BUILD IMAGE]\/\==- I 11:48:45 Source File Sectors: 12,216,320 (MODE1/2048) I 11:48:45 Source File Size: 25,019,023,360 bytes I 11:48:45 Source File Volume Identifier: Disc I 11:48:45 Source File Volume Set Identifier: 48C85E1500BA67E3 I 11:48:45 Source File Application Identifier: ImgBurn v2.5.8.0 I 11:48:45 Source File Implementation Identifier: ImgBurn I 11:48:45 Source File File System(s): UDF (1.02) I 11:48:45 Destination Device: [4:0:0] HL-DT-ST BD-RE BH16NS40 1.03 (I:) (SATA) I 11:48:45 Destination Media Type: BD-R (Disc ID: CMCMAG-BA5-000) I 11:48:45 Destination Media Supported Write Speeds: 4x, 6x, 8x, 10x, 12x I 11:48:45 Destination Media Sectors: 12,219,392 I 11:48:45 Write Mode: BD I 11:48:45 Write Type: DAO I 11:48:45 Write Speed: 4x I 11:48:45 Hardware Defect Management Active: No I 11:48:45 BD-R Verify Not Required: Yes I 11:48:45 Link Size: Auto I 11:48:45 Lock Volume: Yes I 11:48:45 Test Mode: No I 11:48:45 OPC: No I 11:48:45 BURN-Proof: Enabled I 11:48:45 Write Speed Successfully Set! - Effective: 17,984 KB/s (4x) I 11:48:58 Filling Buffer... (80 MiB) I 11:48:59 Writing LeadIn... I 11:48:59 Writing Session 1 of 1... (1 Track, LBA: 0 - 12216319) I 11:48:59 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 12216319) I 12:12:10 Synchronising Cache... I 12:12:13 Closing Track... I 12:12:14 Finalising Disc... W 12:12:51 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Power On, Reset, or Bus Device Reset Occurred W 12:12:51 Finalise Disc Failed! - Reason: Power On, Reset, or Bus Device Reset Occurred W 12:12:51 Retrying (1 of 3)... W 12:12:51 Retry Failed - Reason: Cannot Format Medium - Incompatible Medium W 12:12:51 Retrying (2 of 3)... W 12:12:51 Retry Failed - Reason: Cannot Format Medium - Incompatible Medium W 12:12:51 Retrying (3 of 3)... W 12:12:51 Retry Failed - Reason: Cannot Format Medium - Incompatible Medium W 12:12:59 Retrying (4)... W 12:12:59 Retry Failed - Reason: Cannot Format Medium - Incompatible Medium W 12:13:00 Retrying (5)... W 12:13:00 Retry Failed - Reason: Cannot Format Medium - Incompatible Medium W 12:13:00 Retrying (6)... W 12:13:00 Retry Failed - Reason: Cannot Format Medium - Incompatible Medium W 12:13:05 Retrying (7)... W 12:13:05 Retry Failed - Reason: Cannot Format Medium - Incompatible Medium W 12:13:06 Retrying (8)... W 12:13:06 Retry Failed - Reason: Cannot Format Medium - Incompatible Medium I 12:13:08 Exporting Graph Data... I 12:13:08 Graph Data File: C:\Users\\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH16NS40_1.03_08-JUNE-2016_11-48_CMCMAG-BA5-000_4x.ibg I 12:13:08 Export Successfully Completed! I 12:13:08 Operation Successfully Completed! - Duration: 00:24:22 I 12:13:08 Average Write Rate: 17,564 KiB/s (4.0x) - Maximum Write Rate: 17,690 KiB/s (4.0x) I 12:13:08 Cycling Tray before Verify... W 12:13:15 Waiting for device to become ready... I 12:14:26 Device Ready! I 12:15:51 Operation Started! I 12:15:51 Source Device: [4:0:0] HL-DT-ST BD-RE BH16NS40 1.03 (I:) (SATA) I 12:15:51 Source Media Type: BD-R (Disc ID: CMCMAG-BA5-000) I 12:15:51 Source Media Supported Read Speeds: 2x, 4.2x, 6.2x, 8x, 9.9x, 12.1x I 12:15:51 Source Media Supported Write Speeds: 4x, 6x, 8x, 10x, 12x I 12:15:51 Source Media Sectors: 12,216,320 I 12:15:51 Source Media Size: 25,019,023,360 bytes I 12:15:51 Image File: -==/\/[BUILD IMAGE]\/\==- I 12:15:51 Image File Sectors: 12,216,320 (MODE1/2048) I 12:15:51 Image File Size: 25,019,023,360 bytes I 12:15:51 Image File Volume Identifier: I 12:15:51 Image File Volume Set Identifier: 48C85E1500BA67E3 I 12:15:51 Image File Application Identifier: ImgBurn v2.5.8.0 I 12:15:51 Image File Implementation Identifier: ImgBurn I 12:15:51 Image File File System(s): UDF (1.02) I 12:15:51 Read Speed (Data/Audio): MAX / MAX I 12:15:52 Read Speed - Effective: 5x - 12.1x I 12:15:52 Verifying Session 1 of 1... (1 Track, LBA: 0 - 12216319) I 12:15:52 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 12216319) W 12:35:04 Failed to Read Sectors 10987680 - 10987711 - Reason: Power On, Reset, or Bus Device Reset Occurred W 12:38:32 Failed to Read Sector 10987680 - Reason: Power On, Reset, or Bus Device Reset Occurred W 12:38:32 Sector 10987680 maps to File: dummy.txt W 12:39:30 Retrying (1)... W 12:40:28 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred W 12:40:31 Failed to Read Sector 10987680 - Reason: Power On, Reset, or Bus Device Reset Occurred W 12:40:31 Sector 10987680 maps to File: dummy.txt W 12:42:02 Failed to Read Sectors 11512336 - 11512367 - Reason: Power On, Reset, or Bus Device Reset Occurred W 12:42:28 Failed to Read Sector 11512336 - Reason: Power On, Reset, or Bus Device Reset Occurred W 12:42:28 Sector 11512336 maps to File: dummy.txt E 12:42:30 Failed to Read Sector 11512336 - Reason: Power On, Reset, or Bus Device Reset Occurred E 12:42:30 Sector 11512336 maps to File:dummy.txt E 12:42:31 Failed to Verify Sectors! I 12:42:32 Exporting Graph Data... I 12:42:32 Graph Data File: C:\Users\\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH16NS40_1.03_08-JUNE-2016_11-48_CMCMAG-BA5-000_4x.ibg I 12:42:32 Export Successfully Completed! E 12:42:32 Operation Failed! - Duration: 00:26:39 I 12:42:32 Average Verify Rate: 14,408 KiB/s (3.3x) - Maximum Verify Rate: 52,059 KiB/s (11.9x)
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.