ybeard

Turn it off next time you verify and it should be ok. That was with it on before I even posted my original message. I've since turned it off and have been burning some DVD"s. I've burned 3 so far and they've verified fine, so looks like it was the AnyDVD after all. I guess I just didn't realize that the verify on DVD Decrypter wasn't a 'true' verify in a bit for bit sense. Thanks all for the attention and I should have tried turning AnyDVD off in the first place.

Thanks for the reply... I'll try disabling AnyDVD to see if that makes a difference... As requested, I went and got the logs of the failed verify.... I've also gone out and gotten the updated firmware, but think I'll wait until I finish my current burns before I give that a go. Don't want to take a chance to slobberknock my drive on a weekend where I'd have trouble replacing it! I 09:52:38 Operation Started! I 09:52:38 Source File: H:\DVD-ISO\FLINTSTONES.ISO I 09:52:38 Source File Sectors: 2,285,849 (MODE1/2048) I 09:52:38 Source File Size: 4,681,418,752 bytes I 09:52:38 Source File Volume Identifier: FLINTSTONES I 09:52:38 Source File Implementation Identifier: DVD Shrink I 09:52:38 Source File File System(s): ISO9660, UDF (1.02) I 09:52:38 Destination Device: [2:0:0] PIONEER DVD-RW DVR-110D 1.37 (E:) (ATA) I 09:52:38 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 4x, 6x, 8x, 12x) I 09:52:38 Destination Media Sectors: 2,298,496 I 09:52:38 Write Mode: DVD I 09:52:38 Write Type: DAO I 09:52:38 Write Speed: 8x I 09:52:38 Link Size: Auto I 09:52:38 Test Mode: No I 09:52:38 BURN-Proof: Enabled I 09:52:38 Filling Buffer... I 09:52:38 Writing LeadIn... I 09:53:13 Writing Image... I 10:00:57 Synchronising Cache... I 10:01:09 Image MD5: b1ed86e35b53d32db05b9164458477e9 I 10:01:09 Operation Successfully Completed! - Duration: 00:08:31 I 10:01:09 Average Write Rate: 9,874 KB/s (7.1x) - Maximum Write Rate: 11,132 KB/s (8.0x) I 10:01:09 Cycling Tray before Verify... W 10:01:32 Waiting for device to become ready... I 10:01:34 Device Ready! I 10:01:34 Operation Started! I 10:01:34 Source Device: [2:0:0] PIONEER DVD-RW DVR-110D 1.37 (E:) (ATA) I 10:01:34 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: TYG02) (Speeds: 4x, 6x, 8x, 12x) I 10:01:34 Image File: H:\DVD-ISO\FLINTSTONES.ISO I 10:01:34 Image File Sectors: 2,285,849 (MODE1/2048) I 10:01:34 Image File Size: 4,681,418,752 bytes I 10:01:34 Image File Volume Identifier: FLINTSTONES I 10:01:34 Image File Implementation Identifier: DVD Shrink I 10:01:34 Image File File System(s): ISO9660, UDF (1.02) I 10:01:34 Verifying Sectors... E 10:16:30 Miscompare at LBA: 280, Offset: 35, File: VIDEO_TS\VIDEO_TS.IFO E 10:16:30 Device: 0x00 E 10:16:30 Image File: 0xC0 E 10:16:30 Total Errors in Sector: 1 E 10:16:30 Failed to Verify Sectors! E 10:16:30 Operation Failed! - Duration: 00:14:55 I 10:16:30 Average Verify Rate: 0 KB/s (0.0x) - Maximum Verify Rate: 0 KB/s (0.0x) I 10:16:48 Close Request Acknowledged I 10:16:48 Closing Down... I 10:16:48 Shutting down SPTI... I 10:16:49 ImgBurn closed!

Hi there.... I've been a longtime user of DVD Decrypter and finally decided to give ImgBurn a try. I use Taiyo Yuden TYG02 -R Value media and it works great with DVD Decrypter. They invariably verify just fine. However, using ImgBurn, I've had 3 of 4 fail verification. Burning the same ISO's using DVD Decrypter results in a perfect burn and verifies correctly. I use a Pioneer 110D w/1.37 FW. I run AnyDVD in the background. My OS is Win2K. I haven't tried removing AnyDVD to see if that makes a difference, but couldn't see why it should if DVD Decrypter works. Obviously, I'm able to burn DVD's with the older software, but I was looking to run the current software in case I happen to buy another writer that the older software might not support. Any clues?