Clarity3
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Clarity3
-
-
That's good to know. As you see, I use 25GB BD-RE and I also use 25GB BD-R and less so BD-R DL (50GB)/BD-RE DL. Now knowing the quality of Verbatim is more suspect than in previous years, what manufacturers do you suggest for these disc types.
-
That's interesting. These are Verbatim discs, manufactured in Singapore and chosen for there supposed superior quality. I have elected to use Verbatim discs for the last 15+ years based on a variety of user group findings, in particularly Redfox (previously Slyfox). Up until now, I have only had problems with with other makes of disc and perhaps the odd issue with the initial 50GB versions.
I have not encountered the AnyDVD problem, probably because I heed the warning and ensure it is disabled.
I will watch the future write process times and see what happens.
-
Attached is the log file from one of the lengthy burns.
Interestingly, after doing a 'Full Erase' (which I assume includes a reformat), burning again, the time dropped to 38 minutes as for this disc in its earlier life.
-
You were right!
Having tried yet another BD-RE (not new but less used) the time dropped to 38 minutes. I guess it's Murphy's Law that I would pick up two consecutive discs that had reached their EOL.
Thanks for the tip.
-
Thanks for the reply.
I did try another disc as I wondered if that might be the problem but had the same result. I have also tried a second optical drive and the times are exactly the same (within seconds).
I didn't save a log file, so perhaps I should do another burn and post one, just in case there is a setting I am not seeing.
-
I have used ImgBurn for years without paying a lot of attention because 'it just works'. However recently, I had a major OS failure that required a software rebuild and reinstallation of the majority of apps, including ImgBurn.
I have just burnt a 25GB Blu ray x2 BD-RE (21GB content), which has taken 1hr 25m. As I recall, it never took that long previously and while, as I said, I never really paid a lot of attention, I think it was around the 40-50mins. Please can someone firstly confirm whether my 40-50minutes is correct before I start asking for help to work out what might be slowing the process down.
-
I have been burning BD-R and BD-RE with an Asus BW-16D1HT and recently the device buffer indication has been sitting at 62% and not 100%.
Burn time
in ImgBurn Support
Posted
I take it, that's a setting I don't have control of and perhaps best not have. So, am I right in thinking for BD-RE, ensuring all three formatting setting conditions are ticked is the ideal?
How best would these three format conditions be set for BD-R?