Jump to content

xen-uno

Members
  • Posts

    12
  • Joined

  • Last visited

Everything posted by xen-uno

  1. Awesome photos indeed! Where did you find them?
  2. Try DVDStyler. Successfully took an mpg, added an opening screen with a Start button, then generated an iso, and burnt with IB. Opening screen shows on PowerDVD, but not my Ilo stand-alone DVD recorder ... trying to figure that one out. Still plays regardless (skips opening screen).
  3. I was using the DVD Copy function off Nero 6.6.1.4 and unchecking the "delete image upon completion", then canceling right after image generation and before it actually stated burning. Used all standard Nero defaults. Funny that Nero sees a fully formatted +RW as full even tho again there is only 292 MB of data. Since it's possible to Build directly off a DVD with IB, that's how I'll do it from now on and leave Nero out of the loop. Thanks again.
  4. 'tach ... successfully modded the opening screen on a similar (Ilo structure wise) DVD. Had to use cell cam to capture the text under the thumbnails ... I have looked all through the DVD with 'Blanker trying to find "TITLE 01" ... no luck. A Sony DVD camera my sis has burns the title right on the opening screen, where the Ilo does not (must have a resource string table somewhere). Any ideas?
  5. Merci beaucoup 'tach ... I'll try that this coming weekend
  6. OK ... that worked ... File System states correct size. Copied DVD contents to HD then used Build (ISO 9660 ... otherwise accepted all default settings), Write, then Read. Iso shrunk compared to nrg (290 MB vs 330 MB). Tested again with Build set to ISO9660+UDF ... again successful. Fuji +RW tested in LG drive ... successful. Oddly enough, the Fuji disk in the Sony drive (burnt originally by the LG) showed in Read as "Formatted: No (Started)" tho it was fully erased thus fully formatted before burn (it reads correctly as "Formatted: Yes" in LG drive which could be firmware related ... at LL10 now but LL12 is available). Read (Sony +RW in Sony drive): SONY DVD RW DRU-500A 2.1a (1394) Current Profile: DVD+RW Disc Information: Status: Complete Erasable: Yes Formatted: Yes Sessions: 1 Sectors: 2,295,104 Size: 4,700,372,992 bytes Time: 510:03:29 (MM:SS:FF) File System Information: Sectors: 145,093 Size: 297,150,464 bytes Time: 32:16:43 (MM:SS:FF) TOC Information: Session 1... -> Track 01 (Mode 1, LBA: 0 - 2295103) -> LeadOut (LBA: 2295104) Physical Format Information (ADIP): Disc ID: RICOHJPN-W01-01 Book Type: DVD+RW Part Version: 2 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Physical Format Information (Last Recorded): Disc ID: RICOHJPN-W01-01 Book Type: DVD+RW Part Version: 2 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 IB Log: I 17:18:03 Operation Started! I 17:18:03 Building Image Tree... I 17:18:20 Checking Directory Depth... I 17:18:20 Calculating Totals... I 17:18:20 Preparing Image... I 17:18:21 Checking Path Length... I 17:18:21 Image Size: 297,172,992 bytes I 17:18:21 Image Sectors: 145,104 I 17:18:28 Operation Successfully Completed! - Duration: 00:00:25 I 17:18:28 Operation Started! I 17:18:28 Image Contents: 9 Files, 0 Folders I 17:18:28 Image Sectors: 145,104 I 17:18:28 Image Size: 297,172,992 bytes I 17:18:28 Image Single Layer Profile: DVD-R/RW (Media Capacity: 2,298,496) I 17:18:28 Image Volume Identifier: TEST I 17:18:28 Image Application Identifier: IMGBURN V2.2.0.0 - THE ULTIMATE IMAGE BURNER! I 17:18:28 Image File System(s): ISO9660 I 17:18:28 Destination File: D:\DVDImage\Build-Read-Burn-test.iso I 17:18:28 Destination Free Space: 31,096,270,848 bytes (30,367,452 KB) (29,655 MB) (28 GB) I 17:18:28 Destination File System: NTFS I 17:18:28 File Splitting: Auto I 17:18:28 Writing Image... I 17:18:52 Image MD5: 6463c3436756ae4a96fd3e0c8a481163 I 17:18:52 Operation Successfully Completed! - Duration: 00:00:23 I 17:18:52 Average Write Rate: 12,617 KB/s (84.1x) - Maximum Write Rate: 14,656 KB/s (97.7x) I 17:19:40 Operation Started! I 17:19:40 Source File: D:\DVDImage\Build-Read-Burn-test.iso I 17:19:40 Source File Sectors: 145,104 (MODE1/2048) I 17:19:40 Source File Size: 297,172,992 bytes I 17:19:40 Source File Volume Identifier: TEST I 17:19:40 Source File Application Identifier: IMGBURN V2.2.0.0 - THE ULTIMATE IMAGE BURNER! I 17:19:40 Source File File System(s): ISO9660 I 17:19:40 Destination Device: [0:0:0] SONY DVD RW DRU-500A 2.1a (Y:) (1394) I 17:19:40 Destination Media Type: DVD+RW (Disc ID: RICOHJPN-W01-01) (Speeds: 2x, 2.4x) I 17:19:40 Destination Media Sectors: 2,295,104 I 17:19:40 Write Mode: DVD I 17:19:40 Write Type: DAO I 17:19:40 Write Speed: MAX I 17:19:40 Link Size: Auto I 17:19:40 Test Mode: No I 17:19:40 BURN-Proof: Enabled I 17:19:42 Filling Buffer... (20 MB) I 17:19:43 Writing LeadIn... I 17:19:43 Writing Image... I 17:21:07 Synchronising Cache... I 17:21:09 Closing Session... I 17:21:10 Image MD5: 6463c3436756ae4a96fd3e0c8a481163 I 17:21:10 Operation Successfully Completed! - Duration: 00:01:30 I 17:21:10 Average Write Rate: 3,496 KB/s (2.5x) - Maximum Write Rate: 4,325 KB/s (3.1x) I'll try making a tiny nrg and see if the FS problem re-occurs ... if so then I'll link to it and maybe you could give it a gander. Thanks again.
  7. What would be the best way to edit the opening menu on a DVD? The Ilo DVD Recorder (from WalMart - very good yet pretty cheap) produces the following screen ... There is also Title, Time&Date, Clip Length and Recording Mode (EP, LP, ELP, etc) that is overlayed on top that I couldn't capture with PowerDVD, SnagIt, or Ctrl-Shift-PrnScreen. I want to do a PhotoShop edit on the thumbnails and the text underneath without changing the macros or anything else on the DVD. I have Nero 6.6 Ultra (with Vision) & DVDStyler. After extracting DVD contents to hard drive, will I have to turn the vob's into mpeg's, edit, and re-VOB or is there an easier way? The screen is from the following DVD (Simpsons episodes ... it don't get better than this) ... W:\>dir /s Volume in drive W is DVD_VR Volume Serial Number is 4217-D37B Directory of W:\ 01/07/04 01:31 PM <DIR> VIDEO_RM 01/07/04 01:58 PM <DIR> VIDEO_TS 0 File(s) 0 bytes Directory of W:\VIDEO_RM 01/07/04 01:31 PM <DIR> . 01/07/04 01:31 PM <DIR> .. 01/07/04 01:31 PM 32,768 VIDEO_RM.IFO 01/07/04 01:31 PM 1,048,576 VIDEO_RM.DAT 01/07/04 01:58 PM 32,768 VIDEO_RM.BUP 3 File(s) 1,114,112 bytes Directory of W:\VIDEO_TS 01/07/04 01:58 PM <DIR> . 01/07/04 01:31 PM <DIR> .. 01/07/04 01:58 PM 327,680 VIDEO_TS.VOB 01/07/04 01:58 PM 12,288 VIDEO_TS.IFO 01/07/04 01:58 PM 12,288 VIDEO_TS.BUP 01/07/04 01:58 PM 69,632 VTS_01_0.IFO 01/13/04 11:07 AM 1,073,739,776 VTS_01_1.VOB 01/07/04 01:58 PM 69,632 VTS_01_0.BUP 01/13/04 11:07 AM 1,073,739,776 VTS_01_2.VOB 01/13/04 11:07 AM 1,073,739,776 VTS_01_3.VOB 01/13/04 11:07 AM 1,073,739,776 VTS_01_4.VOB 01/13/04 11:07 AM 303,505,408 VTS_01_5.VOB 10 File(s) 4,598,956,032 bytes Total Files Listed: 13 File(s) 4,600,070,144 bytes 6 Dir(s) 0 bytes free What file is the screen located in ... VIDEO_TS.VOB? What about the text? Thanks.
  8. Iso's are a great long term hard disk storage format ... they keep everything together with no chance of loosing files & directories. Also, if the disk is bootable, it will preserve that. Iso's can be broken down later to their constituent files & folders by using a prog like IsoBuster.
  9. UK ... did test on both my DVD drives (Sony external & LG internal) & 2 disks (Sony +RW & Fuji +RW). Used an nrg of ~ 330 MB in size. There is a very slight discrepancy of reported size between Disc & File System ... but it looks like a possible bug to me. Disk info identical per disk on either drive. LG w/ Fuji disk HL-DT-ST DVDRAM GSA-H10L LL10 (ATA) Current Profile: DVD+RW Disc Information: Status: Complete Erasable: Yes Formatted: Yes Sessions: 1 Sectors: 2,295,104 Size: 4,700,372,992 bytes Time: 510:03:29 (MM:SS:FF) File System Information: Sectors: 2,295,105 Size: 4,700,375,040 bytes Time: 510:03:30 (MM:SS:FF) TOC Information: Session 1... -> Track 01 (Mode 1, LBA: 0 - 2295103) -> LeadOut (LBA: 2295104) Physical Format Information (Last Recorded): Disc ID: RICOHJPN-W11-01 Book Type: DVD+RW Part Version: 2 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Sony w/ Sony disk SONY DVD RW DRU-500A 2.1a (1394) Current Profile: DVD+RW Disc Information: Status: Complete Erasable: Yes Formatted: Yes Sessions: 1 Sectors: 2,295,104 Size: 4,700,372,992 bytes Time: 510:03:29 (MM:SS:FF) File System Information: Sectors: 2,295,105 Size: 4,700,375,040 bytes Time: 510:03:30 (MM:SS:FF) TOC Information: Session 1... -> Track 01 (Mode 1, LBA: 0 - 2295103) -> LeadOut (LBA: 2295104) Physical Format Information (ADIP): Disc ID: RICOHJPN-W01-01 Book Type: DVD+RW Part Version: 2 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Physical Format Information (Last Recorded): Disc ID: RICOHJPN-W01-01 Book Type: DVD+RW Part Version: 2 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0
  10. If it couldn't understand it, what would happen ... error message? using the Disc size value in File System? I'm going from memory here as I'm working out of town, but the default for IB is File System it appears (which I never changed), and on this machine and my machine at home, reported size by FS and Disc have always matched on +RW's filled less than capacity. I'll do some more thorough testing this weekend with diff disks & drives and report back. Thanks UK.
  11. UK ... The highlights of your responses ought to go in the FAQ. I also was wondering why +RW's wanted to go through a format, while the other progs I've used (RecordNowMax, Nero, ECDC) are near instantaneous. I understand now.
  12. Since it does does do a sector by sector copy, does that include data-less sectors? A DVD+RW I used Read on created an image the size of the disk (4.7 GB), yet it only had 300 MB or so of data (to see what was up, created an image using Nero 6.6 and the resulting nrg was 330 MB in size). Is there a switch or option in IB to have it disregard data-less sectors? Fine prog BTW.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.