Jump to content

ems

Members
  • Posts

    2
  • Joined

  • Last visited

ems's Achievements

ISF Newbie

ISF Newbie (1/5)

  1. Thanks I'll try that. I used DVDShrink to make the ISO image. That is a good program to use to create an ISO image right? Yes it's a laptop, but it's only temp. The burner in my tower just went out so I'm gonna replace it this weekend and use that to burn the ISO images. Hopefully with a new burner everthing will work out.
  2. Hello, this is my first post. I encountered this problem and can't seem to figure it out. I searched the forum for the answer and while there's many other post with the same question, the reason for the problem various. Any help would be very much welcomed. Thanks. The error says "Device not ready (medium not present)" I 09:34:49 ImgBurn Version 2.3.2.0 started! I 09:34:49 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 09:34:49 Total Physical Memory: 514,092 KB - Available: 234,544 KB W 09:34:49 Drive C:\ (FAT32) does not support single files > 4 GB in size. W 09:34:49 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 09:34:50 Initialising SPTI... I 09:34:50 Searching for SCSI / ATAPI devices... I 09:34:50 Found 1 DVD±RW/RAM! I 09:39:14 Operation Started! I 09:39:14 Source File: C:\Documents and Settings\LocalService\My Documents\HOT_FUZZ.ISO I 09:39:14 Source File Sectors: 25,872 (MODE1/2048) I 09:39:14 Source File Size: 52,985,856 bytes I 09:39:14 Source File Volume Identifier: My Documents I 09:39:14 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 09:39:14 Source File Implementation Identifier: ImgBurn I 09:39:14 Source File File System(s): ISO9660, UDF (1.02) I 09:39:14 Destination Device: [0:1:0] HL-DT-ST DVDRAM GSA-T10N PP02 (E:) (ATA) I 09:39:14 Destination Media Type: DVD-R (Disc ID: RITEKF1) (Speeds: 4x, 8x) I 09:39:14 Destination Media Sectors: 2,297,888 I 09:39:14 Write Mode: DVD I 09:39:14 Write Type: DAO I 09:39:14 Write Speed: MAX I 09:39:14 Link Size: Auto I 09:39:14 Test Mode: No I 09:39:14 BURN-Proof: Enabled I 09:39:15 Filling Buffer... (20 MB) I 09:39:15 Writing LeadIn... I 09:40:09 Writing Image... (LBA: 0 - 25871) I 09:40:20 Synchronising Cache... I 09:43:19 Image MD5: 5d57f74d2e675c64305360fae4ba93fb I 09:43:19 Operation Successfully Completed! - Duration: 00:04:05 I 09:43:19 Average Write Rate: 4,704 KB/s (3.4x) - Maximum Write Rate: 4,831 KB/s (3.5x) I 09:43:19 Cycling Tray before Verify... W 09:43:25 Waiting for device to become ready... After that the disc tray ejects, I push it back in and then imgburn starts doing something else for 30 sec's or so. Then the disc is ejected again and a message saying "operation successfully completed" pops up. The finished disc is only 51,196KB. Does this seem correct? Thanks for any help. The finished log says..... I 10:54:00 ImgBurn Version 2.3.2.0 started! I 10:54:00 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 10:54:00 Total Physical Memory: 514,092 KB - Available: 207,496 KB W 10:54:00 Drive C:\ (FAT32) does not support single files > 4 GB in size. W 10:54:00 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 10:54:00 Initialising SPTI... I 10:54:00 Searching for SCSI / ATAPI devices... I 10:54:00 Found 1 DVD±RW/RAM! I 10:56:17 Operation Started! I 10:56:17 Source File: C:\Documents and Settings\LocalService\My Documents\HOT_FUZZ.ISO I 10:56:17 Source File Sectors: 25,872 (MODE1/2048) I 10:56:17 Source File Size: 52,985,856 bytes I 10:56:17 Source File Volume Identifier: My Documents I 10:56:17 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 10:56:17 Source File Implementation Identifier: ImgBurn I 10:56:17 Source File File System(s): ISO9660, UDF (1.02) I 10:56:17 Destination Device: [0:1:0] HL-DT-ST DVDRAM GSA-T10N PP02 (E:) (ATA) I 10:56:17 Destination Media Type: DVD-R (Disc ID: RITEKF1) (Speeds: 4x, 8x) I 10:56:17 Destination Media Sectors: 2,298,496 I 10:56:17 Write Mode: DVD I 10:56:17 Write Type: DAO I 10:56:17 Write Speed: MAX I 10:56:17 Link Size: Auto I 10:56:17 Test Mode: No I 10:56:17 BURN-Proof: Enabled I 10:56:17 Filling Buffer... (20 MB) I 10:56:18 Writing LeadIn... I 10:57:11 Writing Image... (LBA: 0 - 25871) I 10:57:23 Synchronising Cache... I 11:00:23 Image MD5: 5d57f74d2e675c64305360fae4ba93fb I 11:00:23 Operation Successfully Completed! - Duration: 00:04:06 I 11:00:23 Average Write Rate: 4,704 KB/s (3.4x) - Maximum Write Rate: 4,831 KB/s (3.5x) I 11:00:23 Cycling Tray before Verify... W 11:00:28 Waiting for device to become ready... I 11:01:02 Device Ready! I 11:01:02 Operation Started! I 11:01:02 Source Device: [0:1:0] HL-DT-ST DVDRAM GSA-T10N PP02 (E:) (ATA) I 11:01:02 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: RITEKF1) (Speeds: 4x, 8x) I 11:01:02 Image File: C:\Documents and Settings\LocalService\My Documents\HOT_FUZZ.ISO I 11:01:02 Image File Sectors: 25,872 (MODE1/2048) I 11:01:02 Image File Size: 52,985,856 bytes I 11:01:02 Image File Volume Identifier: My Documents I 11:01:02 Image File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 11:01:02 Image File Implementation Identifier: ImgBurn I 11:01:02 Image File File System(s): ISO9660, UDF (1.02) I 11:01:02 Verifying Sectors... (LBA: 0 - 25871) I 11:01:16 Device MD5: 5d57f74d2e675c64305360fae4ba93fb I 11:01:16 Image MD5: 5d57f74d2e675c64305360fae4ba93fb I 11:01:16 Operation Successfully Completed! - Duration: 00:00:14 I 11:01:16 Average Verify Rate: 3,696 KB/s (2.7x) - Maximum Verify Rate: 4,831 KB/s (3.5x)
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.