Jump to content

Sliztzan

Members
  • Posts

    125
  • Joined

  • Last visited

Everything posted by Sliztzan

  1. It's a nice feature and my player will play seemless dvds. But I think about when this player breaks and I have to replace it. Will all new players play seamless?
  2. Ok understood and thank you. I read in another thread while searching for answers that you can't select the layer break when burning a ISO to DVD, that you are only able to display them from the tools/ISO menu. So what does it do when it burns the ISO to Disc if two options for layer break are displayed? This is the same ISO I mentioned in post #1
  3. Hello and thanks again for ImgBurn The ISO is from a DL DVD Video and does not include a MDS file. If I burn it as is, I'm sure it will play fine. Past ones have. However, from things I've read here I understand a image that requires a DL DVD should have the MDS file so the layer break information will be up to spec. But just creating a MDS file for the ISO file isn't good enough correct? Should I extract the files from the ISO and make a new ISO with ImgBurn so I can select the break? Also a question about the layer break regarding same image. It gives me two options if I were to burn it using the image only. One has the Good (Gold Star) rating but no SPLIP and the other is Average and yes SPLIP. From a thread I read here describing SPLIP is that a yes means seamless. However I read in the guide for creating a DL ISO on your Hard Drive that the one with the no SPLIP should be selected which had a Blue Star. The other ones were the Gray Star with a yes in SPLIP. It would be nice for the break to be virtually seamless and isn't that indicated by the yes in SPLIP? Which should I choose?
  4. I forgot to mention the log you wanted. I already did look at the help menu and looked at the log the last time you asked. The log only shows the current image file I created. Next time I'll make sure to grab it when I get that message again. Thank you.
  5. thanks though, that log is long gone. It was a pop up message box telling me the image wasn't made correctly as Lightning recognized earlier in this thread. Sorry I couldn't be more descriptive, but what you mentioned about no cell being a proper break would make sense. Thank you.
  6. It wasn't made with shrink thanks. Spinningwheel, I posted a question to understand the features of layer break options. There is no reason to post a log file which I don't have. If you read my post again you'll see I solved the problem by taking the image file back to the raw files so a layer break was correctly made to dvd specs. What I don't understand is creating a layer bread from the vob files which is also a option checkbox.
  7. both of you are way off subject. No shrink was even mentioned. The original stated I had a dvd-9.
  8. why would I use dvd shrink to burn a dvd9 when I have imgburn?
  9. The option I'm talking about is in the layer break options. There is a checkbox for 'seamless'. Why wouldn't I want to check that?
  10. I have had current version for months. What is your point?
  11. I have a ISO/MDS DVD-9 image file set. I attempted to burn with ImgBurn and it said the image file was not in the correct format for burning to a dual layer DVD. It also mentioned something about the layer break. There was a message box that popped up and I could proceed with the burn or cancel the burn. I cancelled it and then mounted the image and ripped a new iso/mds. The same thing happened so I ripped the files to a video_ts folder and used imgburn to burn it that way. So that worked correctly and gave me an option to select a layer break. What I would like to know is that if I had told it to go ahead and burn the DVD the first time I got that error message, what would have happened? I'm sure it would have burned it fine and I just don't understand that message and what it really means. Could you explain please? Thanks very much.
  12. Isn't there an option not to use a layer break so you don't have that pause? I think I've seen that option and unsure about using it. If so, why would anyone want a layer break? That pause is annoying sometimes depending on the scene. Could we get some more info on that and also the vob option which I don't understand at all. Thanks very much.
  13. Ok, understood. Thanks once again Lightning
  14. Hello once again. I am making an DVD Video ISO for other people. It is for many people, so I can't ask each one. It is a single layer DVD and I don't know whether to set the media option on a -R or +R disc. I see it defaults to the -R. I thought the +R are usually recommended and are most common. What setting should I use? Thank you.
  15. my browser is but it's not a very good teacher i've tried to read me dvd's by making an image. been through about 40 without a glitch. sometimes you just need some luck.
  16. the issue with these discs, besides being Ritek, is the bad ones fail near the outer edge (these are dual layer) or about half way through the sectors when verifying. see this thread where I was getting I/O errors. Can I still do what you say?
  17. Ok I'll just have to make img then. Thanks for reply. By the way...sexy avatar. Who is she? Anymore pics?
  18. Unfortunately I've burn many DVDs without verifying each one, or about 50 total. I want to go back and check them now to see if anymore are bad. Is there a easy way of doing that without having to try to make a image with each one?
  19. thanks I bookmarked it. Luckily I have a best buy close to me. I order online for in store pickup to save on shipping. no shipping fees is a good thing
  20. ok thank you just went to best buy online. they have their verbatim 20 pack 8x dvd+r dual layer dvd on sale for 29.99 best deal i've seen around. about 1.50 per dvd. just wanted to pass it on to you guys.
  21. One last quick question for understanding the process. If ImgBurn writes the DVD with no errors then why would it not verify the same?
  22. great, thanks for the apprentice training I was curious how they were burned and that will help me in future issues. I've had never bought any DVD besides Verbatim in all these years excluding this one time when I trusted Sony. Goes to show when something works, leave it alone. Thanks everyone for your help here. I'm slowly learning all the features of Imgburn. I think its a great tool and I recommend it to my friends and acquaintances. Their replies are very positive. Thanks for a great tool, just as DVD Decrypter still is.
  23. Here's your problem. A little searching would have told you to get only Verbatim 2.4X dual layer blanks (MKM-001 MID). The inferior blanks some shop assistant has sold you have errored out on the edge (where they are most likely to burp) Regards Thanks for your reply to my problem. I was surprised to see Ritek. I really thought when I bought these Sony DL DVD at Best Buy that they would have been Verbatim or Taiyo Yuden. I have seen bad reports from other Ritek media, but since Sony had their label on this I was hoping they had chosen a good mfg. Other media I have bought from them were mfg by Taiyo Yuden. But I do realize that you never know until you get home and open the package to put one in your computer and check. I think I will just buy my DL media online now since I can choose what I want. What in the log tells you they errored on the edge?
  24. Here is the log: //****************************************\\ ; ImgBurn Version 2.3.2.0 - Log ; Thursday, 23 August 2007, 16:33:14 ; \\****************************************// ; ; I 15:29:38 ImgBurn Version 2.3.2.0 started! I 15:29:38 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 15:29:38 Total Physical Memory: 1,046,252 KB - Available: 596,212 KB I 15:29:38 Initialising SPTI... I 15:29:38 Searching for SCSI / ATAPI devices... I 15:29:38 Found 2 DVD-ROMs and 2 DVD±RWs! I 15:34:03 Operation Started! I 15:34:03 Source File: E:\DVD\Graffiti\GRAFFITI.MDS I 15:34:03 Source File Sectors: 3,771,376 (MODE1/2048) I 15:34:03 Source File Size: 7,723,778,048 bytes I 15:34:03 Source File Volume Identifier: GRAFFITI I 15:34:03 Source File Application Identifier: DVD Studio Pro:4.0.3, DSPInterface:382, DVDAuthoring:372, DVDBase:396(Encoder: 483), Oxygene:409 I 15:34:03 Source File Implementation Identifier: Apple Computer, Inc. I 15:34:03 Source File File System(s): ISO9660, UDF (1.02) I 15:34:03 Destination Device: [2:0:0] PLEXTOR DVDR PX-755A 1.07 (F:) (ATA) I 15:34:03 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x, 4x) I 15:34:03 Destination Media Sectors: 4,173,824 I 15:34:03 Write Mode: DVD I 15:34:03 Write Type: DAO I 15:34:03 Write Speed: 2.4x I 15:34:03 Link Size: Auto I 15:34:03 Test Mode: No I 15:34:03 BURN-Proof: Enabled I 15:34:03 Optimal L0 Data Zone Capacity: 2,031,680 I 15:34:03 Optimal L0 Data Zone Method: Copied From Original Disc I 15:34:03 Filling Buffer... (40 MB) I 15:34:04 Writing LeadIn... I 15:35:03 Writing Image... (LBA: 0 - 3771375) I 15:35:03 Writing Layer 0... (LBA: 0 - 2031679) I 15:55:56 Writing Layer 1... (LBA: 2031680 - 3771375) I 16:13:53 Synchronising Cache... I 16:13:57 Closing Track... I 16:13:59 Finalising Disc... I 16:17:58 Image MD5: 2daf808402fc7302dda310e44143836e I 16:18:01 Operation Successfully Completed! - Duration: 00:43:55 I 16:18:01 Average Write Rate: 3,238 KB/s (2.3x) - Maximum Write Rate: 3,372 KB/s (2.4x) I 16:18:01 Cycling Tray before Verify... I 16:18:48 Device Ready! I 16:18:50 Operation Started! I 16:18:50 Source Device: [2:0:0] PLEXTOR DVDR PX-755A 1.07 (F:) (ATA) I 16:18:50 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RITEK-D01-01) (Speeds: 2.4x, 4x) I 16:18:50 Image File: E:\DVD\Graffiti\GRAFFITI.MDS I 16:18:50 Image File Sectors: 3,771,376 (MODE1/2048) I 16:18:50 Image File Size: 7,723,778,048 bytes I 16:18:50 Image File Volume Identifier: GRAFFITI I 16:18:50 Image File Application Identifier: DVD Studio Pro:4.0.3, DSPInterface:382, DVDAuthoring:372, DVDBase:396(Encoder: 483), Oxygene:409 I 16:18:50 Image File Implementation Identifier: Apple Computer, Inc. I 16:18:50 Image File File System(s): ISO9660, UDF (1.02) I 16:18:50 Verifying Sectors... (LBA: 0 - 3771375) I 16:18:50 Verifying Layer 0... (LBA: 0 - 2031679) W 16:32:49 Failed to Read Sector 1997312 - L-EC Uncorrectable Error W 16:32:49 Sector 1997312 maps to File: VIDEO_TS\VTS_01_4.VOB W 16:33:02 Failed to Read Sector 1997313 - L-EC Uncorrectable Error W 16:33:02 Sector 1997313 maps to File: VIDEO_TS\VTS_01_4.VOB E 16:33:06 Failed to Read Sector 1997314 - L-EC Uncorrectable Error E 16:33:06 Sector 1997314 maps to File: VIDEO_TS\VTS_01_4.VOB E 16:33:06 Failed to Verify Sectors! E 16:33:06 Operation Failed! - Duration: 00:14:16 I 16:33:06 Average Verify Rate: 4,666 KB/s (3.4x) - Maximum Verify Rate: 10,918 KB/s (7.9x) I 16:33:14 Close Request Acknowledged I 16:33:14 Closing Down... I 16:33:14 Shutting down SPTI... I 16:33:14 ImgBurn closed!
  25. Hello and thank you for imgburn I have Anydvd installed and see your note when I open Imgburn regarding disabling it. I use Imgburn to burn image files with a mds file. I close Anydvd and then use Imgburn. I right click on the mds file and select burn with Imgburn, but when it verifies it finds several I/O errors. Even though I closed anydvd down does something still have control or should I have disabled it before closing? Odd. Because I burn with Alcohol 120% and then Imgburn verifies the image file ok. Only when I burn with Imgburn does the verify return errors. again to clarify: I burn it with Alcohol 120, then verify with Imgburn and it verify no problems. I burn it with Imgburn and verify with Imgburn and has many I/O errors with same image file as used with Alcohol 120. This has been the case with 2 image files (*.iso + *. mds) Is this because Anydvd is installed? Also, I see the mds Imp ID is Apple Computer. Could this be a Mac / PC issue with the MDS or IMG file?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.