Jump to content

In Need of Help FAST !


Fast&Furious

Recommended Posts

When i tro to burn an xbox 360 game it says L0 data capacity zone failed. reason: invalid field in parameter

 

I 15:22:05 ImgBurn Version 2.4.4.0 started!

I 15:22:05 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 15:22:05 Total Physical Memory: 523,760 KB - Available: 161,864 KB

I 15:22:05 Initialising SPTI...

I 15:22:05 Searching for SCSI / ATAPI devices...

I 15:22:05 Found 1 DVD

Link to comment
Share on other sites

Hi Jonathan and welcome to the forum! :)

 

You could try to get a later firmware installed from this page. Your current one is A102. It might support those discs better.

 

http://www.firmwarehq.com/LG/GSA-4120B/files.html

 

It's a rather old burner and it seems to have problems with these newer media codes.

 

Have you been able to burn these discs with this burner before?

Link to comment
Share on other sites

I 17:54:35 Operation Started!

I 17:54:35 Source File: C:\Documents and Settings\me\Desktop\ZARTHPACY\ZARTHPACY.dvd

I 17:54:35 Source File Sectors: 3,825,936 (MODE1/2048)

I 17:54:35 Source File Size: 7,835,516,928 bytes

I 17:54:35 Source File Volume Identifier: XGD2DVD_NTSC

I 17:54:35 Source File Volume Set Identifier: 34672923

I 17:54:35 Source File Implementation Identifier: Sonic Scenarist 3.1

I 17:54:35 Source File File System(s): ISO9660, UDF (1.02)

I 17:54:35 Destination Device: [1:1:0] HL-DT-ST DVDRAM GSA-4120B A117 (D:) (ATA)

I 17:54:35 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 0.5x, 1x, 2x, 3.1x, 4.2x, 5.2x)

I 17:54:35 Destination Media Sectors: 4,173,824

I 17:54:35 Write Mode: DVD

I 17:54:35 Write Type: DAO

I 17:54:35 Write Speed: 4x

I 17:54:35 Link Size: Auto

I 17:54:35 Lock Volume: Yes

I 17:54:35 Test Mode: No

I 17:54:35 OPC: No

I 17:54:35 BURN-Proof: Enabled

I 17:54:37 Book Type Setting: DVD-ROM

I 17:54:37 User Specified L0 Data Zone Capacity: 1,913,760

E 17:54:38 Set L0 Data Zone Capacity Failed! - Reason: Write Protected

E 17:54:38 Operation Failed! - Duration: 00:00:03

I 17:54:38 Average Write Rate: N/A - Maximum Write Rate: N/A

Link to comment
Share on other sites

More or less that your burner still don't like that brand. :(

 

What happens if you use the A104 firmware? If that also fails - either use the media that's in the link mmalves posted or get a new burner that likes these new kind of media codes (8x rated discs).

Link to comment
Share on other sites

  • 3 weeks later...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.