Jump to content

2.5.0.0 is really buggy for me..


Jared
 Share

Recommended Posts

Hello everyone.

 

I'm having major issues since I upgraded to 2.5.0.0. Here's just a summary of my problems:

 

  1. Write speed only tops at 1.0x, 4.0x in 2.4.0.0.
  2. The device buffer constantly drops and "re-buffers" during the write cycle.
  3. Sometimes, the CD drive simply stops writing and refuses the cancel the write cycle, requiring a manual reboot.
  4. The verify cycle only outputs errors.

 

This ONLY occured in 2.5.0.0. I'll post my device details soon once I get the previous version installed again. I doubt it's a device issue--why would it start after installing 2.5.0.0?

 

EDIT: Device information w/ a Maxell DVD+RW 4.7GB:

 

HL-DT-ST DVD+-RW GWA4164B E113 (ATA)
Current Profile: DVD+RW

Disc Information:
Status: Complete
Erasable: Yes
Formatted: Yes
Sessions: 1
Sectors: 2,295,104
Size: 4,700,372,992 bytes
Time: 510:03:29 (MM:SS:FF)
Supported Write Speeds: 4x

TOC Information:
Session 1... (LBA: 0)
-> Track 01  (Mode 1, LBA: 0 - 2295103)
-> LeadOut  (LBA: 2295104)

Physical Format Information (ADIP):
Disc ID: RITEK-004-48
Book Type: DVD+RW
Part Version: 2
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0

Physical Format Information (Last Recorded):
Disc ID: RITEK-004-48
Book Type: DVD+RW
Part Version: 2
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0

Format Capacities:
DT: 0x02 - NB: 2295104 (0x00230540) - TDP: 2048
FT: 0x26 - NB: 2295104 (0x00230540) - TDP: 0

Performance (Write Speed):
Descriptor 1...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295103 (0x0023053F)
-> RS: 11,080 KB/s (8x) - WS: 5,540 KB/s (4x)

Edited by Jared
Link to comment
Share on other sites

A burn log would be nice.

 

Just burned this DVD+RW:

 

I 16:25:54 ImgBurn Version 2.4.4.0 started!

I 16:25:54 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)

I 16:25:54 Total Physical Memory: 1,046,508 KB - Available: 560,908 KB

I 16:25:54 Initialising SPTI...

I 16:25:54 Searching for SCSI / ATAPI devices...

I 16:25:54 Found 1 DVD

Link to comment
Share on other sites

check out my findings with a 10x CD-RW that maxes out at 4x

ie takes 20 mins instead of 8 mins

 

http://forum.imgburn.com/index.php?showtop...t=0#entry100529

 

I'm waiting till 2.5.1.0

I'm trying to remember not to get the .0 version, wait for .1

eg. windows 3.0 or XP

 

 

Seems a silly thing to say.

 

I 13:16:25 ImgBurn Version 2.5.0.0 started!

I 13:16:25 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 13:16:25 Total Physical Memory: 1,048,048 KB - Available: 668,868 KB

W 13:16:25 Drive C:\ (FAT32) does not support single files > 4 GB in size.

W 13:16:25 Drive D:\ (FAT32) does not support single files > 4 GB in size.

W 13:16:25 SPTD can have a detrimental effect on drive performance.

I 13:16:25 Initialising SPTI...

I 13:16:25 Searching for SCSI / ATAPI devices...

I 13:16:25 Found 1 DVD-ROM and 1 DVD

post-26-1249129627_thumb.png

Link to comment
Share on other sites

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.