Jump to content

help with xbox 360 burn !!


shayne66

Recommended Posts

ok i'm having problems with my first ever burn,, read a few guides but somewhere have still gone wrong,, i'm using verbatim dvd+r dl disc's and have tried burning an iso using img burn,, after the burn, when i tey to play all i get is a white xbox 360 logo screen and that's it,, need some help please,, here is my log info for the burn -

 

I 20:10:08 ImgBurn Version 2.5.0.0 started!

I 20:10:08 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 20:10:08 Total Physical Memory: 2,096,364 KB - Available: 1,264,608 KB

W 20:10:08 Drive E:\ (FAT32) does not support single files > 4 GB in size.

W 20:10:08 SPTD can have a detrimental effect on drive performance.

I 20:10:08 Initialising SPTI...

I 20:10:08 Searching for SCSI / ATAPI devices...

I 20:10:10 Found 1 DVD-ROM and 1 DVD

Link to comment
Share on other sites

I 19:11:25 Destination Device: [0:0:0] TSSTcorp CDDVDW SH-S202N SB01 (D:) (ATA)

I 19:11:25 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x, 10x)

I 19:11:25 Write Speed: 2x

W 19:11:25 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 5,540 KB/s (4x)

Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished). You might also want to try burning at 6x or 8x.

Link to comment
Share on other sites

ok still having problems' changed all settings and updated dvd drive as stated.. wondering if it's my xbox firmware?? just to make sure here is a verify log on the dvd that i burned,, didn't tick verify before i burnt the disc so did it manually,, i cant find the burning log,, is this the reason?? anway here's the log

 

 

I 18:56:25 ImgBurn Version 2.5.0.0 started!

I 18:56:25 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 18:56:25 Total Physical Memory: 2,096,364 KB - Available: 1,370,264 KB

W 18:56:25 Drive E:\ (FAT32) does not support single files > 4 GB in size.

W 18:56:25 SPTD can have a detrimental effect on drive performance.

I 18:56:25 Initialising SPTI...

I 18:56:25 Searching for SCSI / ATAPI devices...

I 18:56:25 Found 1 DVD-ROM and 1 DVD

Link to comment
Share on other sites

ok still having problems' changed all settings and updated dvd drive as stated.. wondering if it's my xbox firmware?? just to make sure here is a verify log on the dvd that i burned,, didn't tick verify before i burnt the disc so did it manually,, i cant find the burning log,, is this the reason?? anway here's the log

:whistling:

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.