Jump to content

Error I/O


Phatboy

Recommended Posts

I've read through most posts about this. I've updated my firmware. I'm using Verbatim DVD +R DL for media. I made a lot of coasters with DVDD and Nero.......only one successful burn. I recently installed ImgBurn and with a recent firmware update I was able to do a successful burn. I ripped another and burned and got the usual error message:

 

I 19:59:27 ImgBurn Version 1.2.0.0 started!

I 19:59:27 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 19:59:27 Initialising SPTI...

I 19:59:27 Searching for SCSI / ATAPI devices...

I 19:59:27 Found 1 DVD-ROM and 1 DVD?RW!

I 20:01:08 Operation Started!

I 20:01:08 Source File: C:\DVD Rips\FLT0NNF1.MDS

I 20:01:08 Source File Sectors: 4,047,216 (MODE1/2048)

I 20:01:08 Source File Size: 8,288,698,368 bytes

I 20:01:08 Source File Application Identifier: GEAR UDF Application

I 20:01:08 Source File Implementation Identifier: GEAR UDF

I 20:01:08 Destination Device: [1:0:0]SONY DVD RW DRU-810A 1.0d (D:) (ATA)

I 20:01:08 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 8x)

I 20:01:08 Destination Media Sectors: 4,173,824

I 20:01:08 Write Mode: DVD

I 20:01:08 Write Type: DAO

I 20:01:08 Write Speed: MAX

I 20:01:08 Link Size: Auto

I 20:01:08 Test Mode: No

I 20:01:08 BURN-Proof: Enabled

I 20:01:08 Optimal L0 Data Zone Capacity: 2,055,200

I 20:01:08 Optimal L0 Data Zone Method: Copied From Original Disc

I 20:01:08 Filling Buffer...

I 20:01:12 Writing LeadIn...

I 20:01:29 Writing Image...

I 20:01:29 Writing Layer 0... (LBA: 0 - 2055199)

W 20:01:42 Failed to Write Sectors 14432 - 14463 - Write Error

W 20:01:42 Retrying (1 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

W 20:01:42 Retrying (2 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

W 20:01:42 Retrying (3 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

W 20:01:42 Retrying (4 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

W 20:01:42 Retrying (5 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

W 20:01:42 Retrying (6 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

W 20:01:42 Retrying (7 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

W 20:01:42 Retrying (8 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

W 20:01:42 Retrying (9 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

W 20:01:42 Retrying (10 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

W 20:01:42 Retrying (11 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

W 20:01:42 Retrying (12 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

W 20:01:42 Retrying (13 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

W 20:01:42 Retrying (14 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

W 20:01:42 Retrying (15 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

W 20:01:42 Retrying (16 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

W 20:01:42 Retrying (17 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

W 20:01:42 Retrying (18 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

W 20:01:42 Retrying (19 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

W 20:01:42 Retrying (20 of 20)...

W 20:01:42 Retry Failed - Invalid Address For Write

E 20:09:29 Failed to Write Sectors 14432 - 14463 - Write Error

I 20:09:30 Synchronising Cache...

I 20:09:31 Closing Track...

I 20:09:58 Finalising Disc...

E 20:11:23 Failed to Write Image!

E 20:11:23 Operation Failed! - Duration: 00:10:15

I 20:11:23 Average Write Rate: 60 KB/s (0.0x) - Maximum Write Rate: 5,250 KB/s (3.8x)

 

Any ideas?

Link to comment
Share on other sites

DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 8x)

 

I 20:01:08 Write Speed: MAX

 

I would be very tempted to slow your burn speed to 4X max, 8X on DL is very "heavy duty".

 

Is the media you're using actualy rated at 8X?

Link to comment
Share on other sites

I 20:01:08 Source File Application Identifier: GEAR UDF Application

I 20:01:08 Source File Implementation Identifier: GEAR UDF

Phatboy,

 

Aside from Kenadjian's comments, here is a tidbit from me.

 

I am, by far, not an expert in this, but do you have another application that you might be able to use to create the DL image file? I've backed up "Flightplan" perfectly fine, but only using a single layer. However, I've read in other threads that some applications don't create DL images properly (or as well as others). Perhaps if you used another application to create your image, you may have more success. Just a thought...

Edited by Flawless115
Link to comment
Share on other sites

Another coaster. Reduced burn speed to 2.4. I haven't changed any settings and I just had a successful burn. Not sure what to think.

 

I 21:09:35 ImgBurn Version 1.2.0.0 started!

I 21:09:35 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 21:09:35 Initialising SPTI...

I 21:09:35 Searching for SCSI / ATAPI devices...

I 21:09:35 Found 1 DVD-ROM and 1 DVD?RW!

I 21:12:23 Operation Started!

I 21:12:23 Source File: C:\DVD Rips\FLT0NNF1.MDS

I 21:12:23 Source File Sectors: 4,047,216 (MODE1/2048)

I 21:12:23 Source File Size: 8,288,698,368 bytes

I 21:12:23 Source File Application Identifier: GEAR UDF Application

I 21:12:23 Source File Implementation Identifier: GEAR UDF

I 21:12:23 Destination Device: [1:0:0]SONY DVD RW DRU-810A 1.0d (D:) (ATA)

I 21:12:23 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 8x)

I 21:12:23 Destination Media Sectors: 4,173,824

I 21:12:23 Write Mode: DVD

I 21:12:23 Write Type: DAO

I 21:12:23 Write Speed: 2.4x

I 21:12:23 Link Size: Auto

I 21:12:23 Test Mode: No

I 21:12:23 BURN-Proof: Enabled

I 21:12:23 Optimal L0 Data Zone Capacity: 2,055,200

I 21:12:23 Optimal L0 Data Zone Method: Copied From Original Disc

I 21:12:23 Filling Buffer...

I 21:12:27 Writing LeadIn...

W 21:12:52 Failed to Write Sectors 0 - 31 - Session Fixation Error Writing Lead In

W 21:12:52 Retrying (1 of 20)...

I 21:13:06 Writing LeadIn...

I 21:13:06 Writing Image...

I 21:13:06 Writing Layer 0... (LBA: 0 - 2055199)

W 21:14:40 Failed to Write Sectors 81728 - 81759 - Write Error

W 21:14:40 Retrying (1 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

W 21:14:40 Retrying (2 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

W 21:14:40 Retrying (3 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

W 21:14:40 Retrying (4 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

W 21:14:40 Retrying (5 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

W 21:14:40 Retrying (6 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

W 21:14:40 Retrying (7 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

W 21:14:40 Retrying (8 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

W 21:14:40 Retrying (9 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

W 21:14:40 Retrying (10 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

W 21:14:40 Retrying (11 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

W 21:14:40 Retrying (12 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

W 21:14:40 Retrying (13 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

W 21:14:40 Retrying (14 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

W 21:14:40 Retrying (15 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

W 21:14:40 Retrying (16 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

W 21:14:40 Retrying (17 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

W 21:14:40 Retrying (18 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

W 21:14:40 Retrying (19 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

W 21:14:40 Retrying (20 of 20)...

W 21:14:40 Retry Failed - Invalid Address For Write

E 21:14:51 Failed to Write Sectors 81728 - 81759 - Write Error

I 21:14:51 Synchronising Cache...

I 21:14:52 Closing Track...

I 21:15:04 Finalising Disc...

E 21:16:50 Failed to Write Image!

E 21:16:50 Operation Failed! - Duration: 00:04:27

I 21:16:50 Average Write Rate: 1,556 KB/s (1.1x) - Maximum Write Rate: 3,355 KB/s (2.4x)

Link to comment
Share on other sites

@flawless115,

 

This is as good as it gets. ;)

 

I 20:01:08 Optimal L0 Data Zone Capacity: 2,055,200

I 20:01:08 Optimal L0 Data Zone Method: Copied From Original Disc

OK, Ken! Like I said, I'm no expert, so I defer to the more knowledgable on this subject (especially considering that I've never tried to burn to DL).

Link to comment
Share on other sites

@phatboy,

 

Here are the specks for the same media that you're using from a supported drive.

Note the speeds supported.

 

HL-DT-ST DVDRAM GSA-4120B A117 (ATA)

Current Profile: DVD+R DL

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 4,173,824

Free Space: 8,547,991,552 bytes

Free Time: 927:32:74 (MM:SS:FF)

Supported Write Speeds: 2.4x

 

DVD+R DL Boundary Information:

L0 Data Zone Capacity: 2,086,912

Changeable: Yes

 

Physical Format Information (Last Recorded):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

Link to comment
Share on other sites

SONY DVD RW DRU-810A 1.0d (ATA)

Current Profile: DVD+R DL

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 4,173,824

Free Space: 8,547,991,552 bytes

Free Time: 927:32:74 (MM:SS:FF)

Supported Write Speeds: 2.4x, 4x, 8x

 

DVD?R DL Boundary Information:

L0 Data Zone Capacity: 2,086,912

Changeable: Yes

 

Physical Format Information (ADIP):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

This is what ImgBurn says about my blank Verbatim DVD +R DL

Link to comment
Share on other sites

Supported Write Speeds: 2.4x, 4x, 8x

 

Yes, I could see that in the log, and that's what worries me, this media is only rated at 2.4X yet your drive is reporting 4X and 8X, do you know what your media is rated at?

 

Sometimes the drive will return higher speeds than the media rating, however this is most unusual for DL media.

Link to comment
Share on other sites

Are the buffers nice and steady while burning the DL media?

 

Actually the Device buffer is all over the place.

 

Ok, check this out to start of with.

 

It's a windows caching problem.

 

Seems windows doesn't cache me reading in the 4gb file if I read in 64k chunks. As I switched to 256k (to hopefully speed things up!), it now caches everything and eats all your memory.

 

This was reported lastweek sometime and fixed almost immediately.

 

Get 1.2.1.0 when I release it and you'll be fine.

 

Cheers for reporting it though.

Link to comment
Share on other sites

Yes, I could see that in the log, and that's what worries me, this media is only rated at 2.4X yet your drive is reporting 4X and 8X, do you know what your media is rated at?
Verbatim is even sketchy on the speeds. I took the following quote from : Verbatim Website

 

Verbatim DVD+R DL discs burn up to 8X speed with compatible high speed DVD+R DL drives. Saving you about 24 minutes per burn

 

But they seem to contradict themselves in any other literature about DL. Most actually mention 2.4 only.

Link to comment
Share on other sites

Dell Dimension L733r

 

733 MHz Processor

L2 Cache Size 256

40GB Hard drive

382 mb Ram

Sony DRU-810A DVD+/-RW drive

Windows XP SP2

 

Memory

Available Memory 42.85 %

Page File Size 1665.5Mb

Available Page File 37.16 %

Virtual Memory 2047.8Mb

Available Virtual Memory 98.03 %

Memory Slot 1 [DIMM1] 128Mb

Memory Slot 2 [DIMM2] 256Mb

Link to comment
Share on other sites

Dell Dimension L733r

 

733 MHz Processor

L2 Cache Size 256

40GB Hard drive

382 mb Ram

Sony DRU-810A DVD+/-RW drive

Windows XP SP2

 

Memory

Available Memory 42.85 %

Page File Size 1665.5Mb

Available Page File 37.16 %

Virtual Memory 2047.8Mb

Available Virtual Memory 98.03 %

Memory Slot 1 [DIMM1] 128Mb

Memory Slot 2 [DIMM2] 256Mb

 

I dare say this is part of your problem, for testing purposes install an earlier version of ImgBurn, and see how that goes, keep your burn speed at 2.4X tho.

Link to comment
Share on other sites

I tried ImgBurn 1.1.0.0 with the same results. Thanks for all your help btw Ken.

 

You're welcome. :)

 

The only other thing that I can think of, other than the fact that the drive is just not capable of burning DL media, is to check your DMA settings, please read the link I've posted, go to post #2.

 

http://forum.imgburn.com/index.php?showtopic=59

 

Let us know how it goes.

Link to comment
Share on other sites

Given the patchy performance at burning DVD+R DL's with this Sony drive I wonder if its fooked ? For whatever reason it doesn't seem to like burning the best available DL media out there......

 

I don't suppose you have another drive capable of burning DL's ?

Link to comment
Share on other sites

check your DMA settings, please read the link I've posted, go to post #2
I uninstalled my IDE controller ( I have XP ) and rebooted. DMA is enabled.

I even re-updated my firmware. Still no luck. Tried one last burn which failed.

 

Given the patchy performance at burning DVD+R DL's with this Sony drive I wonder if its fooked ?

 

I'm going to wait for the next release v1.2.1.0. If that doesn't work my wife's XMas present gets returned. :blink:

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.