Jump to content

error: failed to read from file


scrokk

Recommended Posts

Hello I have a problem, I'm burning a dvd+dl and at 69% the program says

"error: failed to read from file x36.iso"
reason: erreur de données (controle de redondance cyclique)"

 

That's the first time it appears, why? ...And I have wasted another dvd...

 

 

that's the log

 

I 16:51:23 ImgBurn Version 2.5.0.0 started!
I 16:51:23 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)
I 16:51:23 Total Physical Memory: 1.048.048 KB  -  Available: 529.208 KB
W 16:51:23 SPTD can have a detrimental effect on drive performance.
I 16:51:24 Initialising SPTI...
I 16:51:24 Searching for SCSI / ATAPI devices...
I 16:51:24 Found 1 DVD±RW and 1 DVD±RW/RAM!
W 16:51:43 Device Removal Detected!
I 16:51:43 Searching for SCSI / ATAPI devices...
I 16:51:44 Found 1 DVD±RW!
W 16:51:51 Device Arrival Detected!
I 16:51:52 Searching for SCSI / ATAPI devices...
I 16:51:52 Found 1 DVD±RW and 1 DVD±RW/RAM!
I 16:52:38 Operation Started!
I 16:52:38 Source File: D:\...\x36.dvd
I 16:52:38 Source File Sectors: 3.827.488 (MODE1/2048)
I 16:52:38 Source File Size: 7.838.695.424 bytes
I 16:52:38 Source File Volume Identifier: DVD_ROM
I 16:52:38 Source File Volume Set Identifier: fd244000MS UDFBridge
I 16:52:38 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 16:52:38 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 16:52:38 Source File File System(s): ISO9660; UDF (1.50)
I 16:52:38 Destination Device: [0:0:0] HL-DT-ST DVDRAM GP08LU11 KV01 (F:) (USB)
I 16:52:38 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x)
I 16:52:38 Destination Media Sectors: 4.173.824
I 16:52:38 Write Mode: DVD
I 16:52:39 Write Type: DAO
I 16:52:39 Write Speed: 2x
I 16:52:39 Link Size: Auto
I 16:52:39 Lock Volume: Yes
I 16:52:39 Test Mode: No
I 16:52:39 OPC: No
I 16:52:39 BURN-Proof: Enabled
W 16:52:39 Write Speed Miscompare! - Wanted: 2.770 KB/s (2x), Got: 8.310 KB/s (6x)
I 16:52:39 Book Type Setting: DVD-ROM
I 16:52:39 User Specified L0 Data Zone Capacity: 1.913.760
I 16:52:39 Set L0 Data Zone Capacity Succeeded!
I 16:54:00 Filling Buffer... (40 MB)
I 16:54:22 Writing LeadIn...
I 16:54:34 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 16:54:34 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 16:54:34 Writing Layer 0... (LBA: 0 - 1913759)
I 17:37:01 Writing Layer 1... (LBA: 1913760 - 3827487)
E 18:26:32 Failed to read from file: x36.iso
E 18:26:32 Reason: Erreur de données (contrôle de redondance cyclique).
I 18:26:36 Synchronising Cache...
W 18:26:47 User opted to skip the 'Close Track/Session/Disc' functions.
E 18:26:47 Failed to Write Image!
I 18:26:47 Exporting Graph Data...
I 18:26:48 Graph Data File: D:\...\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GP08LU11_KV01_19-NOVEMBER-2009_16-52_MKM-003-00_2x.ibg
I 18:26:48 Export Successfully Completed!
E 18:26:48 Operation Failed! - Duration: 01:34:09
I 18:26:48 Average Write Rate: 959 KB/s (0.7x) - Maximum Write Rate: 3.375 KB/s (2.4x)

Edited by scrokk
Link to comment
Share on other sites

I 16:52:38 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x)

 

W 16:52:39 Write Speed Miscompare! - Wanted: 2.770 KB/s (2x), Got: 8.310 KB/s (6x)

 

The above are taken from your log, since mkm-003 is capable of much greater speed, your drive doesn't recognise the media correctly. Your drive is also about 5 years old and drives that old have a bad time with Dl discs. I would advise that If you cannot find a firmware update, scrap the drive and get a new one

 

spinner

Link to comment
Share on other sites

I 16:52:38 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x)

 

W 16:52:39 Write Speed Miscompare! - Wanted: 2.770 KB/s (2x), Got: 8.310 KB/s (6x)

 

The above are taken from your log, since mkm-003 is capable of much greater speed, your drive doesn't recognise the media correctly. Your drive is also about 5 years old and drives that old have a bad time with Dl discs. I would advise that If you cannot find a firmware update, scrap the drive and get a new one

 

spinner

 

no sir! I bought my dvd burner one week ago!!! It's an LG external slim model GP08LU11...

Link to comment
Share on other sites

The one built in Windows itself. Using Windows Explorer/My Computer, right-click on your D: drive and choose Properties, go the Tools tab and there you'll have the option for checking for errors. Also enable the option to fix the errors when asked.

Link to comment
Share on other sites

The one built in Windows itself. Using Windows Explorer/My Computer, right-click on your D: drive and choose Properties, go the Tools tab and there you'll have the option for checking for errors. Also enable the option to fix the errors when asked.

 

 

done.. and now?!

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.