Jump to content
Sign in to follow this  
Incarnadine

Miscompare

Recommended Posts

I have been using ImgBurn for a while now and have never experienced so many "Miscompare" errors during a verification then now. I have never changed my media type. I have always used RiData and Philips media. The first three cake boxes of RiData and Philips DVDs went smooth. Now I'm on my fourth cake box for each brand and every disc is getting a "Miscompare" error during the verification process. I went through 5 discs of each brand with no success. Normally I only hit 1 "Miscompare" out of 10 discs or so. I upgraded the firmware of my burner to the latest version, but that didn't change the outcome. I'm using the same exact settings as I did for the three first cake boxes so I have no idea what is wrong. Maybe I just encountered a bad batch of DVD media? I am also using the latest version of ImgBurn 2.5.0.0. Thanks for the help.

Edited by Incarnadine

Share this post


Link to post
Share on other sites

Post a log please.

 

Sorry about that. Here is the log...

 

; //****************************************\\

; ImgBurn Version 2.5.0.0 - Log

; Thursday, 26 November 2009, 15:31:31

; \\****************************************//

;

;

I 15:20:29 ImgBurn Version 2.5.0.0 started!

I 15:20:29 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)

I 15:20:29 Total Physical Memory: 4,193,392 KB - Available: 2,916,040 KB

I 15:20:29 Initialising SPTI...

I 15:20:29 Searching for SCSI / ATAPI devices...

I 15:20:29 Found 1 DVD±RW/RAM!

I 15:20:38 Operation Started!

I 15:20:38 Source File: E:\Disc Images\Movies\Sleepers.mds

I 15:20:38 Source File Sectors: 1,940,193 (MODE1/2048)

I 15:20:38 Source File Size: 3,973,515,264 bytes

I 15:20:38 Source File Volume Identifier: SLEEPERS_SIDE_A_16X9_NA

I 15:20:38 Source File Implementation Identifier: UDF Toshiba DVD Video

I 15:20:38 Source File File System(s): ISO9660, UDF (1.02)

I 15:20:38 Destination Device: [1:0:0] HL-DT-ST DVDRAM GH22NS50 TN02 (F:) (ATA)

I 15:20:38 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 4x, 8x, 16x)

I 15:20:38 Destination Media Sectors: 2,298,496

I 15:20:38 Write Mode: DVD

I 15:20:38 Write Type: DAO

I 15:20:38 Write Speed: MAX

I 15:20:38 Link Size: Auto

I 15:20:38 Lock Volume: Yes

I 15:20:38 Test Mode: No

I 15:20:38 OPC: No

I 15:20:38 BURN-Proof: Enabled

I 15:20:38 Filling Buffer... (40 MB)

I 15:20:40 Writing LeadIn...

I 15:21:16 Writing Session 1 of 1... (1 Track, LBA: 0 - 1940192)

I 15:21:16 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1940192)

I 15:25:33 Synchronising Cache...

I 15:25:42 Exporting Graph Data...

I 15:25:42 Graph Data File: C:\Users\Incarnadine\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GH22NS50_TN02_THURSDAY-NOVEMBER-26-2009_3-20_PM_CMC_MAG._AM3_MAX.ibg

I 15:25:42 Export Successfully Completed!

I 15:25:42 Operation Successfully Completed! - Duration: 00:05:03

I 15:25:42 Average Write Rate: 15,157 KB/s (10.9x) - Maximum Write Rate: 21,433 KB/s (15.5x)

I 15:25:42 Cycling Tray before Verify...

W 15:25:51 Waiting for device to become ready...

I 15:26:03 Device Ready!

I 15:26:06 Operation Started!

I 15:26:06 Source Device: [1:0:0] HL-DT-ST DVDRAM GH22NS50 TN02 (F:) (ATA)

I 15:26:06 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: CMC MAG. AM3) (Speeds: 4x, 8x, 16x)

I 15:26:06 Image File: E:\Disc Images\Movies\Sleepers.mds

I 15:26:06 Image File Sectors: 1,940,193 (MODE1/2048)

I 15:26:06 Image File Size: 3,973,515,264 bytes

I 15:26:06 Image File Volume Identifier: SLEEPERS_SIDE_A_16X9_NA

I 15:26:06 Image File Implementation Identifier: UDF Toshiba DVD Video

I 15:26:06 Image File File System(s): ISO9660, UDF (1.02)

I 15:26:06 Read Speed (Data/Audio): MAX / MAX

I 15:26:06 Verifying Session 1 of 1... (1 Track, LBA: 0 - 1940192)

I 15:26:06 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 1940192)

E 15:30:40 Miscompare at LBA: 7184, Offset: 2, File: \VIDEO_TS\VIDEO_TS.VOB

E 15:30:40 Device: 0x00

E 15:30:40 Image File: 0x01

E 15:30:40 Total Errors in Sector: 2,011

E 15:30:40 Failed to Verify Sectors!

I 15:30:40 Exporting Graph Data...

I 15:30:40 Graph Data File: C:\Users\Incarnadine\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GH22NS50_TN02_THURSDAY-NOVEMBER-26-2009_3-20_PM_CMC_MAG._AM3_MAX.ibg

I 15:30:40 Export Successfully Completed!

E 15:30:40 Operation Failed! - Duration: 00:04:34

I 15:30:40 Average Verify Rate: 52 KB/s (0.0x) - Maximum Verify Rate: 3,296 KB/s (2.4x)

I 15:31:30 Close Request Acknowledged

I 15:31:30 Closing Down...

I 15:31:31 Shutting down SPTI...

I 15:31:31 ImgBurn closed!

;

Share this post


Link to post
Share on other sites

Try burning at 8x, and if that doesn't work, then try with Verbatim or Taiyo Yuden blanks.

Share this post


Link to post
Share on other sites

Try burning at 8x, and if that doesn't work, then try with Verbatim or Taiyo Yuden blanks.

My burner supports the max speed and I have burned plenty of the same media at max speed, for some reason now though I'm getting a bunch of miscompares like dooms-day is coming!

 

Would there be any difference if I set my burner to "16x" instead of "Max"? I built my own computer so 16x is no problem for my PC.

Edited by Incarnadine

Share this post


Link to post
Share on other sites

16x and max would be the same speed.

 

If it worked before, perhaps a cleaning disc could work.

Share this post


Link to post
Share on other sites

16x and max would be the same speed.

 

If it worked before, perhaps a cleaning disc could work.

 

I purchased and used a lens cleaner, but no success. I think I'm going to shoot my foot now.

Share this post


Link to post
Share on other sites

Instead of paying to the doctor, use the money on some better discs.

Share this post


Link to post
Share on other sites

Instead of paying to the doctor, use the money on some better discs.

 

I wasted too much money on different media. Right now I have three spindles of media on my desk: Philips, Ritek and Verbatim and all of them equal fail, fail, fail :( I'm convinced now that it's not the media at all. My friend just brought his laptop over and I used that to burn the ISO file. I then noticed that the miscompare is at the same exact spot everytime with all media! The same identical sector always fails, so I'm thinking it's the "ISO" file itself, but this confuses me though because I made the ISO file using ImgBurn and not another program, so the ISO file SHOULD be compatible with ImgBurn.

 

I could use some homemade Swedish meatballs right now to calm me down. YUM! YUM! Would you mind sending some!?

Share this post


Link to post
Share on other sites

You moved your burner over into your friends computer?

 

I 15:20:38 Source File Implementation Identifier: UDF Toshiba DVD Video

Doesn't look like an image file done by ImgBurn.

 

Perhaps easier to get the meatballs from IKEA. :)

Share this post


Link to post
Share on other sites

You moved your burner over into your friends computer?

 

I 15:20:38 Source File Implementation Identifier: UDF Toshiba DVD Video

Doesn't look like an image file done by ImgBurn.

 

Perhaps easier to get the meatballs from IKEA. :)

 

I didn't move my burner to my friends laptop, I just used the burner that his laptop already had just to see what results I would have, and they were the same results.

 

The image file that I am trying to burn was actually done my ImgBurn. I own the Sleepers DVD and I wanted to make a back-up copy of it, so I decrypted it in the background using AnyDVD and used ImgBurn to make an image file of the DVD. Thus, the image file is native to ImgBurn.

 

Hahahaha.....so funny that you mention IKEA. Practically all my furniter in my house is from IKEA! I love that store! So.........when are my swedish meatballs going to arrive?

Edited by Incarnadine

Share this post


Link to post
Share on other sites

Please post the log from when you've burned Verbatim blanks after cleaning the burner.

Share this post


Link to post
Share on other sites

Ok everyone, I found the problem. Allow me to explain...

 

I have been using AnyDVD in conjuction with ImgBurn to backup DVDs. I would run AnyDVD in the background while using ImgBurn to rip an image of the DVD. This combination worked fine for some DVDs, but not for all of them. It was yesterday when I seen the warning message that ImgBurn gave me when I was running AnyDVD in the background. I don't remember the warning message word for word, but I do remember that it basically told me that AnyDVD might ruin the verification process of ImgBurn. I now use AnyDVD by itself to rip the DVDs and everything seems to go smoothly now.

 

Cheers!

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.