absolutblue2u Posted April 19, 2006 Share Posted April 19, 2006 Here is the error message I keep getting. Generally it will get about half way then give me a write address error but lately I can't even get to 1 percent. I 20:29:42 ImgBurn Version 1.3.0.0 started! I 20:29:42 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 20:29:42 Initialising SPTI... I 20:29:42 Searching for SCSI / ATAPI devices... I 20:29:43 Found 1 DVD?RW! I 20:30:30 Operation Started! I 20:30:30 Source File: C:\CBM.ISO I 20:30:30 Source File Sectors: 2,217,253 (MODE1/2048) I 20:30:30 Source File Size: 4,540,934,144 bytes I 20:30:30 Source File Volume Identifier: CBM I 20:30:30 Source File Implementation Identifier: DVD Shrink I 20:30:30 Source File UDF Revision: 1.02 I 20:30:30 Destination Device: [0:0:0] PHILIPS DVD+-RW DVD8631 GD30 (D:) (ATA) I 20:30:30 Destination Media Type: DVD+R (Disc ID: YUDEN000-T02-00) (Speeds: 2.4x, 4x, 8x, 12x, 16x) I 20:30:30 Destination Media Sectors: 2,295,104 I 20:30:30 Write Mode: DVD I 20:30:30 Write Type: DAO I 20:30:30 Write Speed: 4x I 20:30:30 Link Size: Auto I 20:30:30 Test Mode: No I 20:30:30 BURN-Proof: Enabled I 20:30:30 Filling Buffer... I 20:30:30 Writing LeadIn... I 20:30:37 Writing Image... W 20:30:40 Failed to Write Sectors 4032 - 4063 - Invalid Address For Write W 20:30:40 Retrying (1 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:40 Retrying (2 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:40 Retrying (3 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:40 Retrying (4 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:40 Retrying (5 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:40 Retrying (6 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:40 Retrying (7 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:40 Retrying (8 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:40 Retrying (9 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:40 Retrying (10 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:40 Retrying (11 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:40 Retrying (12 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:40 Retrying (13 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:40 Retrying (14 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:40 Retrying (15 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:40 Retrying (16 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:40 Retrying (17 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:40 Retrying (18 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:40 Retrying (19 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:40 Retrying (20 of 20)... W 20:30:40 Retry Failed - Invalid Address For Write W 20:30:54 Retrying (21)... W 20:30:54 Retry Failed - Invalid Address For Write W 20:30:55 Retrying (22)... W 20:30:55 Retry Failed - Invalid Address For Write E 20:30:56 Failed to Write Sectors 4032 - 4063 - Invalid Address For Write E 20:30:56 Next Writable Address: 3760 I 20:30:56 Synchronising Cache... I 20:30:57 Closing Track... I 20:30:59 Finalising Disc... W 20:31:07 Potential 'WaitImmediateIO' Deferred Error - Write Error E 20:31:11 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session E 20:31:11 Failed to Write Image! E 20:31:11 Operation Failed! - Duration: 00:00:41 I 20:31:11 Average Write Rate: 424 KB/s (0.3x) - Maximum Write Rate: 424 KB/s (0.3x) Link to comment Share on other sites More sharing options...
lfcrule1972 Posted April 19, 2006 Share Posted April 19, 2006 Have you burnt any of these discs in this spindle without an error ? Are the discs from your usual supplier ? Link to comment Share on other sites More sharing options...
Shamus_McFartfinger Posted April 19, 2006 Share Posted April 19, 2006 Wasn?t there a fella here a few weeks back who had problems with the same drive? I only remember because this drive can be cross-flashed as a BenQ1620 which apparently (may or may not) fixes it. Link to comment Share on other sites More sharing options...
lfcrule1972 Posted April 19, 2006 Share Posted April 19, 2006 You're right - this one ? http://forum.imgburn.com/index.php?showtopic=1075&hl=DVD8631 The upshot was a burner change..... Link to comment Share on other sites More sharing options...
Shamus_McFartfinger Posted April 19, 2006 Share Posted April 19, 2006 The thread was this one. Almost the same model but both can be flashed as a BenQ1620. http://forum.imgburn.com/index.php?showtopic=1226&hl=1620 Link to comment Share on other sites More sharing options...
happy won Posted April 19, 2006 Share Posted April 19, 2006 I have burned hundreds of disks with version 1.2 and never had an issue. Installed 1.3 and coasted 3 in a row have no idea why. Used the same disk I always have with a Lite-On SHM-165P6S RTL any help would be appreciated.... HELP Link to comment Share on other sites More sharing options...
Flawless115 Posted April 19, 2006 Share Posted April 19, 2006 The thread LFC mentions was my original post when I had the Philips 8631 that was giving me problems. Apparently, the Philips 8600 series can be cross-flashed to a BenQ 1620, while the Philips 8700 series can be cross-flashed to a BenQ 1640 (which is what I did when I got my new drive). I should have tried to cross-flash the "defective" Philips 8631 to a BenQ 1620 to see if it improved things any. However, if I would have done that and still had problems, it would have voided the warranty and I wouldn't have been able to get the drive replaced. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 19, 2006 Share Posted April 19, 2006 Happy one, please explain why you're calling these discs coasters. Do you have a log to show us or anything? Do you get the program to verify what it burns? If not, now might be a good time to start doing so. Link to comment Share on other sites More sharing options...
happy won Posted April 19, 2006 Share Posted April 19, 2006 Happy one, please explain why you're calling these discs coasters. Do you have a log to show us or anything? Do you get the program to verify what it burns? If not, now might be a good time to start doing so. Thanks for the quick response I will try and get the log to you. I just never had any issues with 1.2 and started 1.3 and havent gotten a good disk yet. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 19, 2006 Share Posted April 19, 2006 Well I can't think for the life of me what it could be, that's why I'm hoping the log will give us more info. Don't forget about the verify part too please. Link to comment Share on other sites More sharing options...
happy won Posted April 20, 2006 Share Posted April 20, 2006 Well I can't think for the life of me what it could be, that's why I'm hoping the log will give us more info. Don't forget about the verify part too please. I tried it again and it worked fine. I did use the verify option the only thing I can think of was that I had AnyDVD running I turned it off because ImgBurn told me to but I probably needed to reboot. I did a soft reboot but probably needed to do a hard reboot before I burned them. All is fine now. THank you for your help. I will see if my Paypal account is still working and get you a donation to this great project and all your hard work. Link to comment Share on other sites More sharing options...
Recommended Posts