Jump to content

bootable iso help?


jody

Recommended Posts

I'm really having a hard time here. I have a Windows 7 ISO that I want to make into a bootable DVD. It seems to work until I try to boot to the DVD and then I get PRESS ANY KEY TO REBOOT. When I press a key, it reboots and tries to boot to the DVD and I get the same message.

 

Here is my log file and I've attached the windows 7 content. Any ideas would be soooo appreciated.

 

thank you in advance.

 

 

I 18:23:51 ImgBurn Version 2.5.0.0 started!

I 18:23:51 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 18:23:51 Total Physical Memory: 1,014,188 KB - Available: 580,100 KB

W 18:23:51 Drive C:\ (FAT32) does not support single files > 4 GB in size.

W 18:23:51 Drive I:\ (FAT32) does not support single files > 4 GB in size.

I 18:23:51 Initialising SPTI...

I 18:23:51 Searching for SCSI / ATAPI devices...

I 18:23:51 Found 1 DVD±RW and 1 DVD±RW/RAM!

I 18:34:44 Operation Started!

I 18:34:44 Source File: I:\win7.iso

I 18:34:44 Source File Sectors: 1,231,982 (MODE1/2048)

I 18:34:44 Source File Size: 2,523,099,136 bytes

I 18:34:44 Source File Volume Identifier: WIN_EN_DVD

I 18:34:44 Source File Volume Set Identifier: 67148000MS UDFBridge

I 18:34:44 Source File Application Identifier: OSCDIMG 2.54 (01/01/2005 TM)

I 18:34:44 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 18:34:44 Source File File System(s): ISO9660 (Bootable), UDF (1.50)

I 18:34:44 Destination Device: [2:1:0] ATAPI DVD A DH20A4P 9P57 (E:) (ATA)

I 18:34:44 Destination Media Type: DVD+R (Disc ID: RICOHJPN-R03-04) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x)

I 18:34:44 Destination Media Sectors: 2,295,104

I 18:34:44 Write Mode: DVD

I 18:34:44 Write Type: DAO

I 18:34:44 Write Speed: MAX

I 18:34:44 DVD+R Reserve Track: No

I 18:34:44 Link Size: Auto

I 18:34:44 Lock Volume: Yes

I 18:34:44 Test Mode: No

I 18:34:44 OPC: No

I 18:34:44 BURN-Proof: Enabled

I 18:34:44 Book Type Setting: DVD-ROM

I 18:34:44 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 18:34:44 Filling Buffer... (40 MB)

I 18:34:46 Writing LeadIn...

I 18:35:25 Writing Session 1 of 1... (1 Track, LBA: 0 - 1231981)

I 18:35:25 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1231981)

I 18:38:33 Synchronising Cache...

I 18:38:35 Closing Track...

I 18:38:37 Finalising Disc...

I 18:38:48 Exporting Graph Data...

I 18:38:48 Graph Data File: C:\Documents and Settings\jody\Application Data\ImgBurn\Graph Data Files\ATAPI_DVD_A_DH20A4P_9P57_MONDAY-DECEMBER-28-2009_6-34_PM_RICOHJPN-R03-04_MAX.ibg

I 18:38:48 Export Successfully Completed!

I 18:38:48 Operation Successfully Completed! - Duration: 00:04:03

I 18:38:48 Average Write Rate: 13,176 KB/s (9.5x) - Maximum Write Rate: 17,558 KB/s (12.7x)

I 18:38:48 Cycling Tray before Verify...

W 18:38:57 Waiting for device to become ready...

I 18:39:09 Device Ready!

I 18:39:10 Operation Started!

I 18:39:10 Source Device: [2:1:0] ATAPI DVD A DH20A4P 9P57 (E:) (ATA)

I 18:39:10 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: RICOHJPN-R03-04) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x)

I 18:39:10 Image File: I:\win7.iso

I 18:39:10 Image File Sectors: 1,231,982 (MODE1/2048)

I 18:39:10 Image File Size: 2,523,099,136 bytes

I 18:39:10 Image File Volume Identifier: WIN_EN_DVD

I 18:39:10 Image File Volume Set Identifier: 67148000MS UDFBridge

I 18:39:10 Image File Application Identifier: OSCDIMG 2.54 (01/01/2005 TM)

I 18:39:10 Image File Implementation Identifier: Microsoft CDIMAGE UDF

I 18:39:10 Image File File System(s): ISO9660 (Bootable), UDF (1.50)

I 18:39:10 Read Speed (Data/Audio): MAX / MAX

I 18:39:10 Verifying Session 1 of 1... (1 Track, LBA: 0 - 1231981)

I 18:39:10 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 1231981)

I 18:42:19 Exporting Graph Data...

I 18:42:19 Graph Data File: C:\Documents and Settings\jody\Application Data\ImgBurn\Graph Data Files\ATAPI_DVD_A_DH20A4P_9P57_MONDAY-DECEMBER-28-2009_6-34_PM_RICOHJPN-R03-04_MAX.ibg

I 18:42:19 Export Successfully Completed!

I 18:42:19 Operation Successfully Completed! - Duration: 00:03:09

I 18:42:19 Average Verify Rate: 13,106 KB/s (9.5x) - Maximum Verify Rate: 17,742 KB/s (12.8x)

post-31984-126205200123.jpg

Link to comment
Share on other sites

Assuming the ISO was made correctly in the first place, there shouldn't be an issue with booting that.

 

Look for Bios updates for your computer and make sure you've got the boot priority set correctly. If there's a key you can press to bring up a boot menu and pick the optical drive directly, even better!

Link to comment
Share on other sites

Thank you so much for the reply.

 

I think that I am going to assume at this point that I did not create the ISO correctly as it was the first time I've ever tried to create an ISO and the directions I followed were somewhat complicated and I just tried writing the ISO to a DVD on a different computer and got the same result.

 

It appears that I can use ImgBurn to create the ISO from the unpacked files that I got from Microsoft so I will try that.

 

Why I couldn't just download the ISO directly when I bought the new OS I don't know but that sure would have been a ton easier.

 

Thank you again!

 

Jody

Link to comment
Share on other sites

What instructions did you follow to create the image in the first place?

 

It seems odd that MS would provide the OS in non ISO format. ISO is easier for everyone!

 

I totally agree. ISO would be so much easier!

 

For some odd reason it came in two files that had to be extracted into a lot of files and then turned into an ISO. This is a link to the directions I followed.

 

http://brainstormtech.blogs.fortune.cnn.com/2009/10/24/windows-7-student-upgrade-hell/

 

I'll try again tonight. :)

Link to comment
Share on other sites

I 18:34:44 Source File File System(s): ISO9660 (Bootable), UDF (1.50)

 

I don't know if this has anything to do with your problem but the official Win 7 (RC) ISO I've seen and an upgrade DVD both use UDF revision 1.02 (I'm referring to 32 bit only, haven't seen a 64 bit one to compare if it's the same).

.

Edited by jeff_nz
Link to comment
Share on other sites

I'm remembering they were box files but I don't see them anymore. I do see the expanded setup folder though.

 

Jeff, thank you, except I have no idea what you are talking about. Sigh... this shouldn't be rocket science.

Link to comment
Share on other sites

Sorry if I caused any confusion... UDF is the file system used on the DVD, and there are several versions of it to choose from (revisions), but since no-one else has commented on it then it's probably not a factor in your case.

 

Let us know how it goes if you do try ImgBurn to create the ISO, as you said above (I guess you saw the guide for it already).

Link to comment
Share on other sites

No problem Jeff. You can call me IT-lite. :)

 

I redownloaded the entire set up last night. I wonder if I am making this too complicated because the expanded setup has the same files as the DVD after I burned it. Maybe all I really need to do is burn the expanded setup on a DVD. I'll try that tonight.

 

I did try creating the ISO but need to spend more time reading the guides so I have some idea of what I'm doing here.

 

Thank you very very very very much!

Link to comment
Share on other sites

I'm sorry. The files were setup1.box and setup2.box I think. I can't remember exactly and the laptop is at home.

 

Thank you for the link. I will read it and do it and see what happens. It would help if I had more time to devote to this.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.