Plumpkatt1 Posted January 1, 2010 Share Posted January 1, 2010 (edited) First off, thank you for taking the time to read this post. I am ready to pull my hair out. Been trying to burn some back up images using IMG Burn and Fujifilm DVD+RDL media. I am thinking the problem is the media but am not sure. I am new to burning DL media. I want to try Verbatum but there arent any around here locally and I am broke till next week to order any. Anyhow, this burner is a couple years old but has never been used till last night. It is a TSS-H552U running the us09 firmware.I updated it last night. This is also a fresh install of winXP SP2. When I burn my image it starts off alright but fails as it starts burning layer 1. It seems to burn well through layer 0. Anyhow I get an error saying: I did try choosing a different burning engine from the default but no matter what I try I get the same results. I have also tried 2.4x 1x and 2x speeds. Thought about trying 4x speed but I only have 3 DVD+RDL disks left. I/O Error Device: TSSTcorp CD/DVDW TS-H552U US09 (E:)(ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 1D 72 00 00 00 20 00 Interpretation:Write (10) - sectors 1929728-1929759 Sense Area: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00 00 00 Interpretation: Invalid address for write I 02:34:33 ImgBurn Version 2.5.0.0 started! I 02:34:33 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 02:34:33 Total Physical Memory: 1,572,336 KB - Available: 1,274,212 KB I 02:34:33 Initialising SPTI... I 02:34:33 Searching for SCSI / ATAPI devices... I 02:34:33 Found 2 DVD±RWs! W 02:39:20 I/O Interface has been changed! I 02:39:20 Shutting down SPTI... I 02:39:20 Initialising ASPI... E 02:39:20 Unable to initialise ASPI! - WNASPI32.DLL E 02:39:20 Reason: The specified module could not be found. E 02:39:20 You need to install an ASPI manager. E 02:39:20 Visit http://www.imgburn.com to download one. E 02:39:20 Alternatively, try changing the 'I/O Interface' in the Settings to a different one. W 02:42:16 I/O Interface has been changed! I 02:42:16 Shutting down ASPI... I 02:42:16 Initialising ASAPI... E 02:42:16 Unable to initialise ASAPI! - ASAPI.DLL E 02:42:16 Reason: The specified module could not be found. E 02:42:16 You need to install an ASAPI manager. E 02:42:16 Visit http://www.imgburn.com to download one. E 02:42:16 Alternatively, try changing the 'I/O Interface' in the Settings to a different one. W 02:42:26 I/O Interface has been changed! I 02:42:26 Shutting down ASAPI... I 02:42:26 Initialising SPTI... I 02:42:26 Searching for SCSI / ATAPI devices... I 02:42:26 Found 2 DVD±RWs! W 02:42:35 I/O Interface has been changed! I 02:42:35 Shutting down SPTI... I 02:42:35 Initialising ElbyCDIO... I 02:42:35 ELBYCDIO.DLL - Elaborate Bytes CDRTools - ElbyCDIO DLL - Version 6.0.8.7 I 02:42:35 Searching for SCSI / ATAPI devices... I 02:42:35 Found 2 DVD±RWs! W 02:42:53 I/O Interface has been changed! I 02:42:53 Shutting down ElbyCDIO... I 02:42:53 Initialising ASAPI... E 02:42:53 Unable to initialise ASAPI! - ASAPI.DLL E 02:42:53 Reason: The specified module could not be found. E 02:42:53 You need to install an ASAPI manager. E 02:42:53 Visit http://www.imgburn.com to download one. E 02:42:53 Alternatively, try changing the 'I/O Interface' in the Settings to a different one. W 02:42:59 I/O Interface has been changed! I 02:42:59 Shutting down ASAPI... I 02:42:59 Initialising Patin-Couffin... E 02:42:59 Unable to initialise Patin-Couffin! E 02:42:59 You need to install BlindWrite / CopyToDVD. E 02:42:59 Visit http://www.vso-software.fr to download it. E 02:42:59 Alternatively, try changing the 'I/O Interface' in the Settings to a different one. W 02:43:07 I/O Interface has been changed! I 02:43:07 Shutting down Patin-Couffin... I 02:43:07 Initialising ElbyCDIO... I 02:43:07 ELBYCDIO.DLL - Elaborate Bytes CDRTools - ElbyCDIO DLL - Version 6.0.8.7 I 02:43:07 Searching for SCSI / ATAPI devices... I 02:43:07 Found 2 DVD±RWs! I 02:43:36 Operation Started! I 02:43:36 Source File: C:\Documents and Settings\Jen\Desktop\Bayonetta\Bayonetta.dvd I 02:43:36 Source File Sectors: 3,827,488 (MODE1/2048) I 02:43:36 Source File Size: 7,838,695,424 bytes I 02:43:36 Source File Volume Identifier: DVD_ROM I 02:43:36 Source File Volume Set Identifier: 356fc000MS UDFBridge I 02:43:36 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 02:43:36 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 02:43:36 Source File File System(s): ISO9660, UDF (1.50) I 02:43:36 Destination Device: [2:0:0] TSSTcorp CD/DVDW TS-H552U US09 (E:) (ATA) I 02:43:36 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x) I 02:43:36 Destination Media Sectors: 4,173,824 I 02:43:36 Write Mode: DVD I 02:43:36 Write Type: DAO I 02:43:36 Write Speed: 1x I 02:43:36 Link Size: Auto I 02:43:36 Lock Volume: Yes I 02:43:36 Test Mode: No I 02:43:36 OPC: No I 02:43:36 BURN-Proof: Enabled W 02:43:37 Write Speed Miscompare! - Wanted: 1,385 KB/s (1x), Got: 2,770 KB/s (2x) I 02:43:37 Book Type Setting: DVD-ROM I 02:43:37 Optimal L0 Data Zone Capacity: 1,913,760 I 02:43:37 Optimal L0 Data Zone Method: Copied From Original Disc I 02:45:04 Set L0 Data Zone Capacity Succeeded! I 02:45:05 Filling Buffer... (40 MB) I 02:45:05 Writing LeadIn... I 02:45:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 02:45:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 02:45:11 Writing Layer 0... (LBA: 0 - 1913759) I 03:04:28 Writing Layer 1... (LBA: 1913760 - 3827487) W 03:04:39 Failed to Write Sectors 1929728 - 1929759 - Reason: Write Error W 03:04:39 Retrying (1 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 03:04:39 Retrying (2 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 03:04:39 Retrying (3 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 03:04:39 Retrying (4 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 03:04:39 Retrying (5 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 03:04:39 Retrying (6 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 03:04:39 Retrying (7 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 03:04:39 Retrying (8 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 03:04:39 Retrying (9 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 03:04:39 Retrying (10 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 03:04:39 Retrying (11 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 03:04:39 Retrying (12 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 03:04:39 Retrying (13 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 03:04:39 Retrying (14 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 03:04:39 Retrying (15 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 03:04:39 Retrying (16 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 03:04:39 Retrying (17 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 03:04:39 Retrying (18 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 03:04:39 Retrying (19 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 03:04:39 Retrying (20 of 20)... W 03:04:39 Retry Failed - Reason: Invalid Address For Write W 11:25:24 Retrying (21)... W 11:25:24 Retry Failed - Reason: Invalid Address For Write W 12:14:27 Retrying (22)... W 12:14:27 Retry Failed - Reason: Invalid Address For Write E 12:14:35 Failed to Write Sectors 1929728 - 1929759 - Reason: Write Error E 12:14:35 Next Writable Address: 1929067 I 12:14:35 Synchronising Cache... I 12:14:48 Closing Track... I 12:14:54 Finalising Disc... W 12:15:34 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 12:15:34 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out W 12:15:34 Retrying (1 of 3)... W 12:16:21 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 12:16:21 Retry Failed - Reason: Session Fixation Error Writing Lead Out W 12:16:21 Retrying (2 of 3)... W 12:17:13 Potential 'WaitImmediateIO' Deferred Error - (77%, 0/3) - Session Fixation Error Writing Lead In W 12:17:13 Retry Failed - Reason: Session Fixation Error Writing Lead In W 12:17:13 Retrying (3 of 3)... W 12:17:41 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead In W 12:17:41 Retry Failed - Reason: Session Fixation Error Writing Lead In E 12:18:58 Failed to Write Image! I 12:18:59 Exporting Graph Data... I 12:19:00 Graph Data File: C:\Documents and Settings\Jen\Application Data\ImgBurn\Graph Data Files\TSSTcorp_CD-DVDW_TS-H552U_US09_FRIDAY-JANUARY-01-2010_2-43_AM_RITEK-S04-66_1x.ibg I 12:19:00 Export Successfully Completed! E 12:19:00 Operation Failed! - Duration: 09:35:21 I 12:19:00 Average Write Rate: 112 KB/s (0.1x) - Maximum Write Rate: 3,413 KB/s (2.5x) Edited January 1, 2010 by Plumpkatt1 Link to comment Share on other sites More sharing options...
cornholio7 Posted January 1, 2010 Share Posted January 1, 2010 your drive only supports one speed, and it doesn't like those discs. leave imgburn on spti when you get your verbatims Link to comment Share on other sites More sharing options...
Plumpkatt1 Posted January 2, 2010 Author Share Posted January 2, 2010 your drive only supports one speed, and it doesn't like those discs. leave imgburn on spti when you get your verbatims Got Rockband Beatles to burn and the xbox 360 acrually read it but I dont have a hard drive installed yet for this xbox and it told me I had to update my xbox to play this game so I said OK and it then said I didnt have enough space to update. I said continue and the xbox now has a new dash board. But the game beatles game starts to load showing various splash screens and after the EA logo the screen goes black and nothing. I suppose it could be a bad burn or that I dont have a Hard drive installed. Not sure which is the issue. I guess the image could also be bad.....ANy thoughts or ideas on this??? Anyhow, I tried to burn another image today using that same FujiFilm media and at the end during the finalization it failed and here is that log. Still think the media is the issue? I 14:23:12 ImgBurn Version 2.5.0.0 started! I 14:23:12 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 14:23:12 Total Physical Memory: 1,572,336 KB - Available: 1,253,916 KB I 14:23:12 Initialising SPTI... I 14:23:12 Searching for SCSI / ATAPI devices... I 14:23:22 Found 2 DVD±RWs! I 14:24:06 Operation Started! I 14:24:06 Source File: C:\Documents and Settings\Jen\Desktop\rrod-ghvh\rrod-ghvh.dvd I 14:24:06 Source File Sectors: 3,827,488 (MODE1/2048) I 14:24:06 Source File Size: 7,838,695,424 bytes I 14:24:06 Source File Volume Identifier: DVD_ROM I 14:24:06 Source File Volume Set Identifier: 356fc000MS UDFBridge I 14:24:06 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 14:24:06 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 14:24:06 Source File File System(s): ISO9660, UDF (1.50) I 14:24:06 Destination Device: [2:0:0] TSSTcorp CD/DVDW TS-H552U US09 (E:) (ATA) I 14:24:06 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x) I 14:24:06 Destination Media Sectors: 4,173,824 I 14:24:06 Write Mode: DVD I 14:24:06 Write Type: DAO I 14:24:06 Write Speed: 4x I 14:24:07 Link Size: Auto I 14:24:07 Lock Volume: Yes I 14:24:07 Test Mode: No I 14:24:07 OPC: No I 14:24:07 BURN-Proof: Enabled W 14:24:07 Write Speed Miscompare! - Wanted: 5,540 KB/s (4x), Got: 2,770 KB/s (2x) I 14:24:07 Book Type Setting: DVD-ROM I 14:24:07 Optimal L0 Data Zone Capacity: 1,913,760 I 14:24:07 Optimal L0 Data Zone Method: Copied From Original Disc I 14:25:28 Set L0 Data Zone Capacity Succeeded! I 14:25:28 Filling Buffer... (40 MB) I 14:25:29 Writing LeadIn... I 14:25:34 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 14:25:34 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 14:25:34 Writing Layer 0... (LBA: 0 - 1913759) I 14:44:51 Writing Layer 1... (LBA: 1913760 - 3827487) I 15:04:09 Synchronising Cache... I 15:04:16 Closing Track... I 15:04:22 Finalising Disc... W 15:04:25 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead In W 15:04:25 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead In W 15:04:25 Retrying (1 of 3)... W 15:04:29 Potential 'WaitImmediateIO' Deferred Error - (3%, 0/3) - Session Fixation Error Writing Lead In W 15:04:29 Retry Failed - Reason: Session Fixation Error Writing Lead In W 15:04:29 Retrying (2 of 3)... W 15:04:33 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead In W 15:04:33 Retry Failed - Reason: Session Fixation Error Writing Lead In W 15:04:33 Retrying (3 of 3)... W 15:04:36 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead In W 15:04:36 Retry Failed - Reason: Session Fixation Error Writing Lead In I 15:05:10 Exporting Graph Data... I 15:05:10 Graph Data File: C:\Documents and Settings\Jen\Application Data\ImgBurn\Graph Data Files\TSSTcorp_CD-DVDW_TS-H552U_US09_FRIDAY-JANUARY-01-2010_2-24_PM_RITEK-S04-66_4x.ibg I 15:05:10 Export Successfully Completed! I 15:05:10 Operation Successfully Completed! - Duration: 00:41:04 I 15:05:10 Average Write Rate: 3,308 KB/s (2.4x) - Maximum Write Rate: 3,413 KB/s (2.5x) Link to comment Share on other sites More sharing options...
Cynthia Posted January 2, 2010 Share Posted January 2, 2010 The media is a hit and miss especially with older drives, so I would say it's the media that is causing your issues. Link to comment Share on other sites More sharing options...
Recommended Posts