Jump to content

dvd burner wont burn dvd+r dls anymore keep getting this error


aawells07

Recommended Posts

hello my dvd burner wont burn dvd+r dls anymore keep getting this error message ive burnt so many with no problems i use the same type of disc ive always used which is (sony dvd+r dl) so the disc isnt theproblem for sure i know this to be a fact cus ive burnt 75 xbox360 games with this type of disc without a hiccup i use imgburn and it will burn cds and regular dvds jus fine if someone could pls help me would be greatly appreciated.

 

 

I 20:58:02 ImgBurn Version 2.5.0.0 started!

I 20:58:02 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600)

I 20:58:02 Total Physical Memory: 1,964,600 KB - Available: 1,074,528 KB

W 20:58:02 SPTD can have a detrimental effect on drive performance.

I 20:58:02 Initialising SPTI...

I 20:58:02 Searching for SCSI / ATAPI devices...

I 20:58:07 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM!

I 21:17:37 Operation Started!

I 21:17:37 Source File: K:\Mass.Effect.2.XBOX360-GLoBAL\DISC1\me23601.dvd

I 21:17:37 Source File Sectors: 3,827,488 (MODE1/2048)

I 21:17:37 Source File Size: 7,838,695,424 bytes

I 21:17:37 Source File Volume Identifier: DVD_ROM

I 21:17:37 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 21:17:37 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 21:17:37 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 21:17:37 Source File File System(s): ISO9660, UDF (1.50)

I 21:17:37 Destination Device: [2:0:0] ATAPI DVD A DH16A6S YA16 (E:) (ATA)

I 21:17:37 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) (Speeds: 2.4x, 4x, 6x, 8x)

I 21:17:37 Destination Media Sectors: 4,173,824

I 21:17:37 Write Mode: DVD

I 21:17:37 Write Type: DAO

I 21:17:37 Write Speed: 2.4x

I 21:17:37 Link Size: Auto

I 21:17:37 Lock Volume: Yes

I 21:17:37 Test Mode: No

I 21:17:37 OPC: No

I 21:17:37 BURN-Proof: Enabled

I 21:17:38 Book Type Setting: N/A

I 21:17:38 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 21:17:38 User Specified L0 Data Zone Capacity: 1,913,760

I 21:34:15 Set L0 Data Zone Capacity Succeeded!

I 21:34:16 Filling Buffer... (40 MB)

I 21:34:25 Writing LeadIn...

I 21:34:27 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 21:34:27 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 21:34:27 Writing Layer 0... (LBA: 0 - 1913759)

I 21:54:10 Writing Layer 1... (LBA: 1913760 - 3827487)

I 22:13:54 Synchronising Cache...

I 22:15:43 Closing Track...

W 22:17:37 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure

W 22:17:37 Close Track Failed! - Reason: Program Memory Area Update Failure

W 22:17:37 Retrying (1 of 3)...

I 22:17:38 Finalising Disc...

W 22:21:10 Potential 'WaitImmediateIO' Deferred Error - (77%, 0/3) - Session Fixation Error Writing Lead In

W 22:21:10 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead In

W 22:21:10 Retrying (1 of 3)...

W 22:23:01 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead In

W 22:23:01 Retry Failed - Reason: Session Fixation Error Writing Lead In

W 22:23:01 Retrying (2 of 3)...

W 22:24:55 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead In

W 22:24:55 Retry Failed - Reason: Session Fixation Error Writing Lead In

W 22:24:55 Retrying (3 of 3)...

W 22:26:46 Potential 'WaitImmediateIO' Deferred Error - (77%, 0/3) - Session Fixation Error Writing Lead In

W 22:26:46 Retry Failed - Reason: Session Fixation Error Writing Lead In

W 22:27:36 Retrying (4)...

W 22:29:26 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead In

W 22:29:26 Retry Failed - Reason: Session Fixation Error Writing Lead In

I 22:33:02 Exporting Graph Data...

I 22:33:03 Graph Data File: C:\Users\Aaron\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_DVD_A_DH16A6S_YA16_FRIDAY-JANUARY-22-2010_9-17_PM_MBIPG101-R10-65_2.4x.ibg

I 22:33:03 Export Successfully Completed!

I 22:33:03 Operation Successfully Completed! - Duration: 01:15:24

I 22:33:03 Average Write Rate: 3,235 KB/s (2.3x) - Maximum Write Rate: 3,346 KB/s (2.4x)

when i stick it in my xbox it says unreadable but plays all my old games no problem thanks in advance

Link to comment
Share on other sites

I 21:17:37 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) (Speeds: 2.4x, 4x, 6x, 8x)

I 21:17:37 Write Speed: 2.4x

Try the other available write speeds.

i have tried that. the speed that ive always burned at was 4x so for sh**s and giggles i tried 2.4x but same thing thanks for the reply sir

Link to comment
Share on other sites

Try 6x and 8x too, but it doesn't change the fact that your blanks' quality is dodgy at best. Have you read this?

 

Also try this firmware update for your burner (remove any disc and close the tray before burning then reboot the computer after it's finished).

nevermind everyone i bought a new package of the same disc and it burned just fine so that means i got ahold of a bad batch of disc yahooooooo thank you all who offered help its very kind of u all i was getting a little worried cus ive been doing this for a long time without anyproblems i jus never would of thought that the last 6 disc out of 10 would all have been bad i dunno but im in good shape now thanks again im happy as u can tell lol

Link to comment
Share on other sites

well i thought i had the problem fixed cus i was able to burn 3 games last night but after 3rd one got the another error message im confused as to why this is happaning again ive never had any problems before here is the error message im getting

I 11:21:31 ImgBurn Version 2.5.0.0 started!

I 11:21:31 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600)

I 11:21:31 Total Physical Memory: 1,964,600 KB - Available: 1,159,124 KB

W 11:21:31 SPTD can have a detrimental effect on drive performance.

I 11:21:31 Initialising SPTI...

I 11:21:31 Searching for SCSI / ATAPI devices...

I 11:21:31 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM!

I 11:31:17 Operation Started!

I 11:31:17 Source File: K:\xxx-fux.iso

I 11:31:17 Source File Sectors: 3,827,488 (MODE1/2048)

I 11:31:17 Source File Size: 7,838,695,424 bytes

I 11:31:17 Source File Volume Identifier: DVD_ROM

I 11:31:17 Source File Volume Set Identifier: fd244000MS UDFBridge

I 11:31:17 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 11:31:17 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 11:31:17 Source File File System(s): ISO9660, UDF (1.50)

I 11:31:17 Destination Device: [2:0:0] ATAPI DVD A DH16A6S YA16 (E:) (ATA)

I 11:31:17 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) (Speeds: 2.4x, 4x, 6x, 8x)

I 11:31:17 Destination Media Sectors: 4,173,824

I 11:31:17 Write Mode: DVD

I 11:31:17 Write Type: DAO

I 11:31:17 Write Speed: 4x

I 11:31:17 Link Size: Auto

I 11:31:17 Lock Volume: Yes

I 11:31:17 Test Mode: No

I 11:31:17 OPC: No

I 11:31:17 BURN-Proof: Enabled

I 11:31:17 Book Type Setting: N/A

I 11:31:17 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 11:31:17 User Specified L0 Data Zone Capacity: 1,913,760

I 11:31:48 Set L0 Data Zone Capacity Succeeded!

I 11:31:50 Filling Buffer... (40 MB)

I 11:31:52 Writing LeadIn...

I 11:31:53 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 11:31:53 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 11:31:53 Writing Layer 0... (LBA: 0 - 1913759)

I 11:43:41 Writing Layer 1... (LBA: 1913760 - 3827487)

I 11:55:30 Synchronising Cache...

I 11:56:05 Closing Track...

I 11:56:07 Finalising Disc...

W 11:59:27 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out

W 11:59:27 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out

W 11:59:27 Retrying (1 of 3)...

W 12:01:57 Potential 'WaitImmediateIO' Deferred Error - (77%, 0/3) - Session Fixation Error Writing Lead In

W 12:01:57 Retry Failed - Reason: Session Fixation Error Writing Lead In

W 12:01:57 Retrying (2 of 3)...

W 12:04:21 Potential 'WaitImmediateIO' Deferred Error - (77%, 0/3) - Session Fixation Error Writing Lead In

W 12:04:21 Retry Failed - Reason: Session Fixation Error Writing Lead In

W 12:04:21 Retrying (3 of 3)...

W 12:06:54 Potential 'WaitImmediateIO' Deferred Error - (77%, 0/3) - Session Fixation Error Writing Lead In

W 12:06:54 Retry Failed - Reason: Session Fixation Error Writing Lead In

I 12:12:31 Exporting Graph Data...

I 12:12:31 Graph Data File: C:\Users\Aaron\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_DVD_A_DH16A6S_YA16_SUNDAY-JANUARY-24-2010_11-31_AM_MBIPG101-R10-65_4x.ibg

I 12:12:31 Export Successfully Completed!

I 12:12:31 Operation Successfully Completed! - Duration: 00:41:14

I 12:12:31 Average Write Rate: 5,406 KB/s (3.9x) - Maximum Write Rate: 5,566 KB/s (4.0x)

I 12:12:31 Cycling Tray before Verify...

W 12:12:37 Waiting for device to become ready...

I 12:13:04 Device Ready!

I 12:13:04 Operation Started!

I 12:13:04 Source Device: [2:0:0] ATAPI DVD A DH16A6S YA16 (E:) (ATA)

I 12:13:04 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: MBIPG101-R10-65) (Speeds: 2.4x, 4x, 6x, 8x)

I 12:13:04 Image File: K:\xxx-fux.iso

I 12:13:04 Image File Sectors: 3,827,488 (MODE1/2048)

I 12:13:04 Image File Size: 7,838,695,424 bytes

I 12:13:04 Image File Volume Identifier: DVD_ROM

I 12:13:04 Image File Volume Set Identifier: fd244000MS UDFBridge

I 12:13:04 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 12:13:04 Image File Implementation Identifier: Microsoft CDIMAGE UDF

I 12:13:04 Image File File System(s): ISO9660, UDF (1.50)

I 12:13:04 Read Speed (Data/Audio): MAX / MAX

I 12:13:04 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 12:13:04 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 12:13:04 Verifying Layer 0... (LBA: 0 - 1913759)

I 12:18:48 Verifying Layer 1... (LBA: 1913760 - 3827487)

W 12:19:22 Failed to Read Sector 1913760 - Reason: No Seek Complete

W 12:19:41 Failed to Read Sector 1913760 - Reason: No Seek Complete

W 12:19:53 Failed to Read Sector 1913761 - Reason: No Seek Complete

E 12:19:59 Failed to Read Sector 1913761 - Reason: No Seek Complete

E 12:20:00 Failed to Verify Sectors!

I 12:20:00 Exporting Graph Data...

I 12:20:00 Graph Data File: C:\Users\Aaron\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_DVD_A_DH16A6S_YA16_SUNDAY-JANUARY-24-2010_11-31_AM_MBIPG101-R10-65_4x.ibg

I 12:20:00 Export Successfully Completed!

E 12:20:00 Operation Failed! - Duration: 00:06:55

I 12:20:00 Average Verify Rate: 9,222 KB/s (6.7x) - Maximum Verify Rate: 16,097 KB/s (11.6x)

if someone can help me i would be so greatful for your efforts thank you

Link to comment
Share on other sites

I think that media code is not very well supported in your drive.

 

You could check one of those discs that burned ok how well it was if you scan it in DVD InfoPro. I think you will see a less good quality burn result with such a scan.

Link to comment
Share on other sites

I think that media code is not very well supported in your drive.

 

You could check one of those discs that burned ok how well it was if you scan it in DVD InfoPro. I think you will see a less good quality burn result with such a scan.

ok cool ill try that and report back with a log :thumbup: oh btw i tried that link to update my firmware and it told me wrong file and didnt match my drive there was a couple letters that were different on mine that didnt match on that site which u cant see until u try to update :'(

Edited by aawells07
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.