GPZ4189 Posted February 21, 2010 Share Posted February 21, 2010 Hello and thanks for any help - my first post I have been using Imgburn for quite a while with great success. Recently, I made some updates on my 5 year old computer and added a faster Lite-on SATA drive model iHAS322. Everything worked well and I used Imgburn with no problems for a couple of weeks. I decided to go a step further and added a new larger SATA hard drive to replace an old SATA smaller Hard drive (used as backup drive only not my sytem drive) and did a clean reinstall of Windows XP Home on the system drive. Everything went fine and I added all my programs back on. The only issue I had was burning DVD's. Not only in Imgburn, but I tried to burn something in Nero 6 and also received errors! My old Plextor 708A IDE drive still worked just fine. I took the SATA drive back and they gave me a new one, which came up with the same errors.(I will post a log) I changed out the new SATA drive with a new Lite-on IDE and everything works again. Any ideas why the SATA DVD drive wouldn't burn DVD's. This was my first SATA DVD drive and I didn't see any jumpers to change for master/slave. I was only using Verbatim DVD+R and DVD-R media that I have had great success with. I was wasting good disks and then tried older junk, but nothing would burn. The only programs I added or changed after the clean install was AVG anti-virus 9 and VLC-Media Player 1.0.5 both updated. Thanks for any help, I'm always trying to learn and I feel like I just gave in and got older IDE technology. Log: I 22:44:35 ImgBurn Version 2.5.0.0 started! I 22:44:35 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 22:44:35 Total Physical Memory: 1,048,048 KB - Available: 584,500 KB W 22:44:35 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! I 22:44:35 Initialising SPTI... I 22:44:35 Searching for SCSI / ATAPI devices... I 22:44:36 Found 1 DVD±RW and 1 DVD±RW/RAM! I 22:51:55 Operation Started! I 22:51:55 Building Image Tree... I 22:51:55 Checking Directory Depth... I 22:51:55 Calculating Totals... I 22:51:55 Preparing Image... I 22:51:55 Checking Path Length... I 22:51:56 Contents: 9 Files, 2 Folders I 22:51:56 Content Type: DVD Video I 22:51:56 Data Type: MODE1/2048 I 22:51:56 File System(s): ISO9660, UDF (1.02) I 22:51:56 Volume Label: Stepfather I 22:51:56 IFO/BUP 32K Padding: Enabled I 22:51:56 Region Code: 1, 2, 3, 4, 5, 6 I 22:51:56 TV System: NTSC I 22:51:56 Size: 4,479,305,728 bytes I 22:51:56 Sectors: 2,187,161 I 22:51:56 Image Size: 4,479,942,656 bytes I 22:51:56 Image Sectors: 2,187,472 I 22:51:59 Operation Successfully Completed! - Duration: 00:00:04 I 22:51:59 Operation Started! I 22:51:59 Source File: -==/\/[bUILD IMAGE]\/\==- I 22:51:59 Source File Sectors: 2,187,472 (MODE1/2048) I 22:51:59 Source File Size: 4,479,942,656 bytes I 22:51:59 Source File Volume Identifier: Stepfather I 22:51:59 Source File Application Identifier: IMGBURN V2.5.0.0 - THE ULTIMATE IMAGE BURNER! I 22:51:59 Source File Implementation Identifier: ImgBurn I 22:51:59 Source File File System(s): ISO9660, UDF (1.02) I 22:51:59 Destination Device: [2:2:0] ATAPI iHAS322 8 3L11 (F:) (ATA) I 22:51:59 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 4x, 6x, 8x, 12x, 16x) I 22:51:59 Destination Media Sectors: 2,295,104 I 22:51:59 Write Mode: DVD I 22:51:59 Write Type: DAO I 22:51:59 Write Speed: 2.4x I 22:51:59 DVD+R Reserve Track: No I 22:51:59 Link Size: Auto I 22:51:59 Lock Volume: Yes I 22:51:59 Test Mode: No I 22:51:59 OPC: No I 22:51:59 BURN-Proof: Enabled W 22:51:59 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x) I 22:51:59 Book Type Setting: DVD-ROM I 22:51:59 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 22:51:59 Filling Buffer... (40 MB) I 22:52:02 Writing LeadIn... W 22:52:14 Failed to Write Sectors 0 - 31 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 22:52:14 Retrying (1 of 20)... I 22:52:14 Writing LeadIn... W 22:52:14 Failed to Write Sectors 32 - 63 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 22:52:14 Retrying (1 of 20)... W 22:52:15 Retry Failed - Reason: Invalid Address For Write W 22:52:15 Retrying (2 of 20)... W 22:52:16 Retry Failed - Reason: Invalid Address For Write W 22:52:16 Retrying (3 of 20)... W 22:52:16 Retry Failed - Reason: Invalid Address For Write W 22:52:16 Retrying (4 of 20)... W 22:52:16 Retry Failed - Reason: Invalid Address For Write W 22:52:16 Retrying (5 of 20)... W 22:52:16 Retry Failed - Reason: Invalid Address For Write W 22:52:16 Retrying (6 of 20)... W 22:52:16 Retry Failed - Reason: Invalid Address For Write W 22:52:16 Retrying (7 of 20)... W 22:52:16 Retry Failed - Reason: Invalid Address For Write W 22:52:16 Retrying (8 of 20)... W 22:52:16 Retry Failed - Reason: Invalid Address For Write W 22:52:16 Retrying (9 of 20)... W 22:52:16 Retry Failed - Reason: Invalid Address For Write W 22:52:16 Retrying (10 of 20)... W 22:52:16 Retry Failed - Reason: Invalid Address For Write W 22:52:16 Retrying (11 of 20)... W 22:52:16 Retry Failed - Reason: Invalid Address For Write W 22:52:16 Retrying (12 of 20)... W 22:52:16 Retry Failed - Reason: Logical Block Address out of Range W 22:52:16 Retrying (13 of 20)... W 22:52:16 Retry Failed - Reason: Logical Block Address out of Range W 22:52:16 Retrying (14 of 20)... W 22:52:16 Retry Failed - Reason: Invalid Address For Write W 22:52:16 Retrying (15 of 20)... W 22:52:16 Retry Failed - Reason: Logical Block Address out of Range W 22:52:16 Retrying (16 of 20)... W 22:52:16 Retry Failed - Reason: Invalid Address For Write W 22:52:16 Retrying (17 of 20)... W 22:52:16 Retry Failed - Reason: Invalid Address For Write W 22:52:16 Retrying (18 of 20)... W 22:52:16 Retry Failed - Reason: Invalid Address For Write W 22:52:16 Retrying (19 of 20)... W 22:52:16 Retry Failed - Reason: Invalid Address For Write W 22:52:16 Retrying (20 of 20)... W 22:52:16 Retry Failed - Reason: Invalid Address For Write E 22:52:23 Failed to Write Sectors 32 - 63 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) E 22:52:23 Next Writable Address: 64 I 22:52:23 Synchronising Cache... W 22:52:28 User opted to skip the 'Close Track/Session/Disc' functions. E 22:52:28 Failed to Write Image! E 22:52:28 Operation Failed! - Duration: 00:00:29 I 22:52:28 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) I 22:53:16 Close Request Acknowledged I 22:53:16 Closing Down... I 22:53:16 Shutting down SPTI... I 22:53:16 ImgBurn closed! Link to comment Share on other sites More sharing options...
Cynthia Posted February 21, 2010 Share Posted February 21, 2010 You have the latest chip set drivers for the motherboard installed? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 21, 2010 Share Posted February 21, 2010 Use/get a decent cable too. I find the Akasa ones pretty good and you can find them on ebay. The shorter the better - assuming it fits of course You can also try following the DMA post in the FAQ. Link to comment Share on other sites More sharing options...
GPZ4189 Posted February 21, 2010 Author Share Posted February 21, 2010 Use/get a decent cable too. I find the Akasa ones pretty good and you can find them on ebay. The shorter the better - assuming it fits of course You can also try following the DMA post in the FAQ. Thanks to both of you who replied. I had not updated my mb chipset, which is NVIDIA nForce 4, and sure enough through MSI Liveupdate4 it stated they needed to be updated. I do recall some time back doing this, and had not done it since the clean install. I'm a little out of practice with my computer skills. Well, I updated them and unfortunately have the IDE drive now and not the SATA to check if that made the difference. I just know the drive worked before the clean install of Windows XP. I wasn't sure if it was hardware related or software. Sounds like hardware from the responses I received. Thanks again - Great people on the Forum! GPZ4189 Link to comment Share on other sites More sharing options...
Recommended Posts