Set L0 Dates Zone Capacity Failed reason: invalid field in CDB.

[djmasturbeat]

First off thanks for this great piece of software and sharing it with everyone.

 

I have seen others with this problem, tho usually pertaining to bad media or burning PS3 games; of course i have not read all 100,000+ posts

Now, I have followed advice to use Verbatim DL, MKM-001-00, and my firmware is updated from firmware HQ, for my TSST Corp TSSTcorp CDDVDW SH-S223F SB03(Samsung SH-S223F) drive. The problem is that other DL media will burn, just many of the burns turn out coasters, but the drive will not even use the good Verbatim DL, MKM-001-00 discs (and not just in this software, but other burning software as well.

 

i won't pretend to know a lot about media and dyes, but am i correct in thinking this drive is junk since it doesn't like good DVDs made with good dyes?

 

anyhow, here is a log:

 

I 00:05:06 ImgBurn Version 2.5.1.0 started!

I 00:05:06 Microsoft Windows Vista Home Premium x64 Edition (6.0, Build 6002 : Service Pack 2)

I 00:05:06 Total Physical Memory: 6,281,396 KB - Available: 1,297,208 KB

I 00:05:06 Initialising Patin-Couffin...

I 00:05:06 Patin-Couffin - VSO Software - Version 1.37.0.0 - Internal Revision 37

I 00:05:06 Searching for SCSI / ATAPI devices...

I 00:05:06 -> Drive 1 - Info: SONY BD-ROM BDU-X10S 1.0d (E:) (ATA)

I 00:05:07 -> Drive 2 - Info: TSSTcorp CDDVDW SH-S223F SB03 (F:) (ATA)

I 00:05:07 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (T:) (SCSI)

I 00:05:07 -> Drive 4 - Info: ELBY CLONEDRIVE 1.4 (U:) (SCSI)

I 00:05:07 -> Drive 5 - Info: ELBY CLONEDRIVE 1.4

I 00:05:07 Found 1 DVD±RW/RAM, 1 BD-ROM and 3 BD-ROM/HD DVD-ROMs!

I 00:06:56 Operation Started!

I 00:06:56 Source File: C:\My Book 21\thisnameischanged.Untouched.NTSC\10\thisnameischanged.MDS

I 00:06:56 Source File Sectors: 3,507,536 (MODE1/2048)

I 00:06:56 Source File Size: 7,183,433,728 bytes

I 00:06:56 Source File Volume Identifier: thisnameischanged

I 00:06:56 Source File Volume Set Identifier: 38c5a1ed

I 00:06:56 Source File Implementation Identifier: Sonic Scenarist 3.1

I 00:06:56 Source File File System(s): ISO9660, UDF (1.02)

I 00:06:56 Destination Device: [2:0:0] TSSTcorp CDDVDW SH-S223F SB03 (F:) (ATA)

I 00:06:56 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x)

I 00:06:56 Destination Media Sectors: 3,708,288

I 00:06:56 Write Mode: DVD

I 00:06:56 Write Type: DAO

I 00:06:56 Write Speed: 2.4x

I 00:06:56 Link Size: Auto

I 00:06:56 Lock Volume: Yes

I 00:06:56 Test Mode: No

I 00:06:56 OPC: No

I 00:06:56 BURN-Proof: Enabled

I 00:06:56 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)

I 00:06:56 Book Type Setting: DVD-ROM

I 00:06:56 Optimal L0 Data Zone Capacity: 1,817,232

I 00:06:56 Optimal L0 Data Zone Method: Copied From Original Disc

E 00:06:59 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB

E 00:07:02 Operation Failed! - Duration: 00:00:03

I 00:07:02 Average Write Rate: N/A - Maximum Write Rate: N/A

 

 

 

 

side panel log:

---------------------------

TSSTcorp CDDVDW SH-S223F SB03 (ATA)

Current Profile: DVD+R DL

 

Disc Information:

Status: Empty

State of Last Session: Empty

Erasable: No

Free Sectors: 3,708,288

Free Space: 7,594,573,824 bytes

Free Time: 824:05:63 (MM:SS:FF)

Next Writable Address: 0

Supported Write Speeds: 2.4x, 4x

 

DVD±R DL Boundary Information:

L0 Data Zone Capacity: 1,854,144

Changeable: No

 

Physical Format Information (ADIP - L0):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (ADIP - L1):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (Last Recorded - L0):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (Last Recorded - L1):

Disc ID: CMC MAG-M01-00

Book Type: DVD+R

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,233,295

Last Physical Sector in Layer 0: 0

 

Performance (Write Speed):

Descriptor 1...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 3708287 (0x0038957F)

-> RS: 16,620 KB/s (12x) - WS: 3,324 KB/s (2.4x)

Descriptor 2...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 3708287 (0x0038957F)

-> RS: 16,620 KB/s (12x) - WS: 5,540 KB/s (4x)

Edited May 21, 2010 by djmasturbeat

[Cynthia]

I 00:06:56 Destination Media Sectors: 3,708,288

For an unused DL disc it should show the value 4 173 824.

 

Sure it was a new disc you used?

[LIGHTNING UK!]

Is there a specific reason for you having changed the I/O interface to Patin Couffin? Put it back on SPTI if possible.

[djmasturbeat]

Is there a specific reason for you having changed the I/O interface to Patin Couffin? Put it back on SPTI if possible.

 

no good reason... i am switching back to SPTI.

 

as for the non-new disc, yeah i must have tried re-using one from a failed attempt, in a rush to have a log to paste in here (my fault) tho i know i have gotten the same error with new discs from new packages.

 

hopefully the problem was my stupidity in changing theI/O interface.

 

thanks for the replies.

thanks again for the great software.

i will try to get back to you if this helps either way so may be we can close this

 

 

EDIT:

 

looks so far like i am able to at least start burning the disc without the error right off the bat. i don't remember changing the I/O interface... i did it mistaakenly i guess, since i know it got changed somehow.

 

thanks again for the help.

 

if the DL burns properly i will report back and get this closed out.

 

EDIT:

 

yeah, this now burned the DL properly. the I/O interface was the issue.

feel free to close this thread.

Edited May 22, 2010 by djmasturbeat

[mmalves]

You can find previous logs in ImgBurn's Help menu.