Jump to content

Looking for Firmware Update


savesheep

Recommended Posts

Hello!

 

I've been reading the forum and I see that people getting the L0 Setting Drive Capacity (or similar) error seem to fix it by either switching to verbatim discs or updating their drive firmware. My drive is a little bit on the old side but its branded as a Memorex DL4WRID2 - some other forum said it was a repackaged Lite-On SOHW-7663 (i think??)

 

I've done some searching myself and its almost as if it never existed. I'm also using Memorex DVD+R DL discs.

 

Here is my log

 

I 10:50:41 ImgBurn Version 2.4.2.0 started!
I 10:50:41 Media Center Edition (6.1, Build 7600)
I 10:50:41 Total Physical Memory: 8,387,112 KB  -  Available: 5,043,096 KB
I 10:50:41 Initialising SPTI...
I 10:50:41 Searching for SCSI / ATAPI devices...
I 10:51:04 Found 1 CD-ROM, 1 DVD±RW, 2 BD-ROM/HD DVD-ROMs and 1 Unknown!
I 10:51:07 Operation Started!
I 10:51:07 Source File: Z:\XBOX 360\Sonic Unleashed\nctnl-big.naturals.dvd
I 10:51:07 Source File Sectors: 3,825,924 (MODE1/2048)
I 10:51:07 Source File Size: 7,835,492,352 bytes
I 10:51:07 Source File Volume Identifier: XGD2DVD_NTSC
I 10:51:07 Source File Volume Set Identifier: 34672923
I 10:51:07 Source File Implementation Identifier: Sonic Scenarist 3.1
I 10:51:07 Source File File System(s): ISO9660, UDF (1.02)
I 10:51:07 Destination Device: [0:0:0] Memorex DVD16+/-DL4RWlD2 JWS6 (E:) (ATA)
I 10:51:07 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) (Speeds: 2.4x)
I 10:51:07 Destination Media Sectors: 4,173,824
I 10:51:07 Write Mode: DVD
I 10:51:07 Write Type: DAO
I 10:51:07 Write Speed: 4x
I 10:51:07 Link Size: Auto
I 10:51:07 Test Mode: No
I 10:51:07 OPC: No
I 10:51:07 BURN-Proof: Enabled
I 10:51:07 User Specified L0 Data Zone Capacity: 1,913,760
E 11:02:32 Failed to set L0 Data Zone Capacity!
E 11:02:32 Reason: Power Calibration Area Error
E 11:02:35 Operation Failed! - Duration: 00:11:24

Edited by savesheep
Link to comment
Share on other sites

#1- for Dual LAyer burning, only use Verbatim or Taiyo Yuden blanks... read why --> Here!

 

#2- Looks like your Memorex DVD16+/-DL4RWlD2 is in fact a rebadged LiteOn SOHW-1673S...

....So try to install this latest LiteOn SOHW-1673S' firmware --> JS0D (25th October, 2005) --> found Here!

Edited by eSkRo
Link to comment
Share on other sites

#1- for Dual LAyer burning, only use Verbatim or Taiyo Yuden blanks... read why --> Here!

 

#2- Looks like your Memorex DVD16+/-DL4RWlD2 is in fact a rebadged LiteOn SOHW-1673S...

....So try to install this latest LiteOn SOHW-1673S' firmware --> JS0D (25th October, 2005) --> found Here!

 

Thank you for that quick response! I downloaded the file and upon running it I get the following error:

bnq3n.jpg

 

Is there a specific way the firmware needs to be updated?

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.