Marty33 Posted June 18, 2010 Share Posted June 18, 2010 Hey everyone, So today I had my Xbox flashed with the newest iXtreme firmware, back at that guy's place his burnt games worked fine. So I got home, started imgburn and tried to burn Red Dead Redemption. I first checked it with abgx and except for saying that Video partition does not match known data it was all green. I burnt it at 4x speed (tried setting 2,4x, but imgburn showed some kind of error message and burnt it at 4x - I have got Asus drw-2014l1t drive). It finished without any errors, but when I put it into xbox drive, the screen goes black. It looked as if it would launch - it wanted to download the newest patch and I have got it in played games, but the screen is black and it wouldn't go any further than that (i can still go to dashboard and all that tho, so the console doesnt freeze). I burned it on Verbatim 8x DVD+R DL. I have got xbox 360 with Hitachi drive, its really old one, 2006 I think. Any ideas? Thanks. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 18, 2010 Share Posted June 18, 2010 Post a log of you burning and verifying a Verb DVD+R DL disc. Read this too as it may apply if the burn + verify was successful. http://forum.imgburn.com/index.php?showtopic=12200 Link to comment Share on other sites More sharing options...
Marty33 Posted June 18, 2010 Author Share Posted June 18, 2010 (edited) I 11:41:09 ImgBurn Version 2.5.1.0 started! I 11:41:09 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 11:41:09 Total Physical Memory: 3 144 796 KB - Available: 2 056 992 KB W 11:41:09 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 11:41:09 Initialising SPTI... I 11:41:09 Searching for SCSI / ATAPI devices... I 11:41:09 -> Drive 1 - Info: ASUS DRW-2014L1T 1.02 (E:) (ATA) I 11:41:09 -> Drive 2 - Info: WDKVYZ YJ85M3OTAR 1.03 (F:) (SCSI) I 11:41:09 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 11:45:56 Operation Started! I 11:45:56 Source File: D:\Red Dead Redemption\rdr.dvd I 11:45:56 Source File Sectors: 3 827 488 (MODE1/2048) I 11:45:56 Source File Size: 7 838 695 424 bytes I 11:45:56 Source File Volume Identifier: DVD_ROM I 11:45:56 Source File Volume Set Identifier: ec67c000MS UDFBridge I 11:45:56 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 11:45:56 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 11:45:56 Source File File System(s): ISO9660; UDF (1.50) I 11:45:56 Destination Device: [2:1:0] ASUS DRW-2014L1T 1.02 (E:) (ATA) I 11:45:56 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x) I 11:45:56 Destination Media Sectors: 4 173 824 I 11:45:56 Write Mode: DVD I 11:45:56 Write Type: DAO I 11:45:56 Write Speed: 2,4x I 11:45:56 Link Size: Auto I 11:45:56 Lock Volume: Yes I 11:45:56 Test Mode: No I 11:45:56 OPC: No I 11:45:56 BURN-Proof: Enabled W 11:45:58 Write Speed Miscompare! - Wanted: 3 324 KB/s (2,4x), Got: 5 540 KB/s (4x) I 11:45:58 Optimal L0 Data Zone Capacity: 1 913 760 I 11:45:58 Optimal L0 Data Zone Method: Copied From Original Disc I 11:46:40 Set L0 Data Zone Capacity Succeeded! I 11:47:04 Filling Buffer... (40 MB) I 11:47:04 Writing LeadIn... I 11:47:08 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 11:47:08 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 11:47:08 Writing Layer 0... (LBA: 0 - 1913759) W 11:47:48 Waiting for buffers to recover... (LBA: 89728) W 11:47:54 Waiting for hard disk activity to reach threshold level... I 11:47:55 Writing Sectors... I 11:59:21 Writing Layer 1... (LBA: 1913760 - 3827487) W 12:04:22 Waiting for buffers to recover... (LBA: 2695456) W 12:04:41 Waiting for hard disk activity to reach threshold level... I 12:04:42 Writing Sectors... W 12:07:53 Waiting for buffers to recover... (LBA: 3174784) W 12:07:54 Waiting for hard disk activity to reach threshold level... I 12:07:55 Writing Sectors... I 12:12:01 Synchronising Cache... I 12:12:29 Closing Track... I 12:12:35 Finalising Disc... I 12:13:19 Exporting Graph Data... I 12:13:19 Graph Data File: C:\Documents and Settings\já\Data aplikací\ImgBurn\Graph Data Files\ASUS_DRW-2014L1T_1.02_18-ČERVEN-2010_11-45_MKM-003-00_2,4x.ibg I 12:13:19 Export Successfully Completed! I 12:13:19 Operation Successfully Completed! - Duration: 00:27:22 I 12:13:19 Average Write Rate: 5 127 KB/s (3.7x) - Maximum Write Rate: 5 800 KB/s (4.2x) I 12:13:19 Cycling Tray before Verify... W 12:13:25 Waiting for device to become ready... I 12:14:08 Device Ready! I 12:14:12 Operation Started! I 12:14:12 Source Device: [2:1:0] ASUS DRW-2014L1T 1.02 (E:) (ATA) I 12:14:12 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x) I 12:14:12 Image File: D:\Red Dead Redemption\rdr.dvd I 12:14:13 Image File Sectors: 3 827 488 (MODE1/2048) I 12:14:13 Image File Size: 7 838 695 424 bytes I 12:14:13 Image File Volume Identifier: DVD_ROM I 12:14:13 Image File Volume Set Identifier: ec67c000MS UDFBridge I 12:14:13 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 12:14:13 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 12:14:13 Image File File System(s): ISO9660; UDF (1.50) I 12:14:13 Read Speed (Data/Audio): MAX / MAX I 12:14:13 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 12:14:13 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 12:14:13 Verifying Layer 0... (LBA: 0 - 1913759) W 12:22:53 Failed to Read Sector 1913760 - Reason: No Seek Complete I 12:22:54 Verifying Layer 1... (LBA: 1913760 - 3827487) W 12:23:04 Retrying (1)... W 12:23:12 Retry Failed - Reason: No Seek Complete W 12:23:19 Failed to Read Sector 1913760 - Reason: No Seek Complete E 12:23:27 Failed to Read Sector 1913761 - Reason: No Seek Complete E 12:23:28 Failed to Verify Sectors! Edited June 18, 2010 by Marty33 Link to comment Share on other sites More sharing options...
Cynthia Posted June 18, 2010 Share Posted June 18, 2010 Could try the other speeds 6x and 8x. 4x is what you have tried with last time. Link to comment Share on other sites More sharing options...
mmalves Posted June 18, 2010 Share Posted June 18, 2010 Also don't use your D: drive with other programs while burning or you'll get buffer underruns again, which compromise the burn quality. Link to comment Share on other sites More sharing options...
ianymaty Posted June 18, 2010 Share Posted June 18, 2010 And also put SP3 on Windows XP 'couse Support for Windows XP with Service Pack 2 (SP2) will end on July 13, 2010. Link to comment Share on other sites More sharing options...
Marty33 Posted June 18, 2010 Author Share Posted June 18, 2010 (edited) well, I uninstalled SPTD as I learned that this is what might be causing the trouble (right?). I don't think that burning it even faster will help, as I have one of those really old dvd drives in my xbox and I learned from other sites and topics in this forum that drives like this are able to read only dvd burnt at 2.4x. The SP3 yeah, I can do that, but will it really help? The question, I think, is, why does it change the writing speed to 4x even though I set 2,4x? And is my drive (asus drw-2014l1t) even able to burn the games properly for them to work? Once again, thanks for any help Edited June 18, 2010 by Marty33 Link to comment Share on other sites More sharing options...
mmalves Posted June 18, 2010 Share Posted June 18, 2010 I 11:45:56 Destination Device: [2:1:0] ASUS DRW-2014L1T 1.02 (E:) (ATA)I 11:45:56 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x) Because 4x is the slowest speed your burner and its firmware support with that disc, and as you saw for yourself, it didn't work. All what the reader drive cares is the burn quality, which won't be optimal if you burn 8x rated media at 0.5x. Maybe cleaning the drive with a lens cleaning disc could help. Link to comment Share on other sites More sharing options...
ianymaty Posted June 18, 2010 Share Posted June 18, 2010 The SP3 yeah, I can do that, but will it really help? This is not really for ImgBurn to do its job done. It is for your system health and security. Link to comment Share on other sites More sharing options...
Recommended Posts