Jump to content

Cant Burn Fast Then 2.4x


Morpheus

Recommended Posts

i burner cant burn up to 16x dual layered and everything i am burning is only burning at 2.4x can someone help me with this i use img burn and nero to burn all my stuff i dunno what happened that all of a sudden my stuff is only burning at 2.4x any help would be gr8 guys thx

Link to comment
Share on other sites

The window on the right hand side shows info about your drive and media. Just copy and paste it here so we can see what's going on. It'll look like this:

 

PIONEER DVD-RW DVR-109 1.58 (ATA)

Current Profile: DVD-R

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2,298,496

Free Space: 4,707,319,808 bytes

Free Time: 510:48:46 (MM:SS:FF)

Supported Write Speeds: 4x, 6x, 8x, 12x

 

Pre-recorded Information:

Manufacturer ID: RITEKG05

 

Recording Management Area Information:

PIONEER DVD-RW DVR-109

 

Physical Format Information (Last Recorded):

Book Type: DVD-R

Part Version: 5

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 0

Last Physical Sector in Layer 0: 0

Link to comment
Share on other sites

LITE-ON DVDRW SOHW-832S VTS3 (ATA)

Current Profile: DVD+R

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2,295,104

Free Space: 4,700,372,992 bytes

Free Time: 510:03:29 (MM:SS:FF)

Supported Write Speeds: 2.4x

 

Physical Format Information (ADIP):

Disc ID: MCC-004-00

Book Type: DVD+R

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

Link to comment
Share on other sites

you can get VSOM from the link i posted in post #6.

re-formatting is a bit drastic if everything else is ok.

is it just these discs that show 2.4x max or is it the same with other discs?

Link to comment
Share on other sites

i tried VSOM and its saying error no match drive detected this utility is only for lite on dvdrw sohw-832s drive then it says detected drives 0-0-0-0-E lite on dvdrw sohw-832s VTS3

 

 

Pretty sure that's saying your drive is OEM. In order to flash it with 832 firmware (which is what your trying to do by the way w/ VSOM) you'll probably need to use FlashFix or something like it to get it to work. In essence you'd be converting it to a stock Liteon 832.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.