Jump to content

Writing failure, Reason: No Seek Complete


noob mark

Recommended Posts

So, I´ve bought DL 8GB Verbatim DVD´s, but now it failed at 49%, giving this message: W 20:14:57 Failed to Write Sectors 1901312 - 1901343 - Reason: No Seek Complete.

Below is the entire log, please tell me what to do!

 

I 19:52:10 ImgBurn Version 2.5.2.0 started!

I 19:52:10 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000)

I 19:52:10 Total Physical Memory: 2.094.912 KB - Available: 1.179.204 KB

W 19:52:10 Drive H:\ (FAT32) does not support single files > 4 GB in size.

W 19:52:10 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 19:52:10 Initialising SPTI...

I 19:52:10 Searching for SCSI / ATAPI devices...

I 19:52:10 -> Drive 1 - Info: Optiarc DVD RW AD-7540A 1.42 (E:) (ATA)

I 19:52:10 -> Drive 2 - Info: HL-DT-ST DVDRAM GH22NS50 TN02 (F:) (USB)

I 19:52:10 Found 2 DVD±RW/RAMs!

I 19:52:46 Operation Started!

I 19:52:46 Source File: D:\Guitar.Hero.5.RF.XBOX360-MARVEL\mvlx-gh5g\mvlx-gh5g.dvd

I 19:52:46 Source File Sectors: 3.827.488 (MODE1/2048)

I 19:52:46 Source File Size: 7.838.695.424 bytes

I 19:52:46 Source File Volume Identifier: DVD_ROM

I 19:52:46 Source File Volume Set Identifier: 356fc000MS UDFBridge

I 19:52:46 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 19:52:46 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 19:52:46 Source File File System(s): ISO9660; UDF (1.50)

I 19:52:46 Destination Device: [0:0:0] HL-DT-ST DVDRAM GH22NS50 TN02 (F:) (USB)

I 19:52:46 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x; 8x)

I 19:52:46 Destination Media Sectors: 4.173.824

I 19:52:46 Write Mode: DVD

I 19:52:46 Write Type: DAO

I 19:52:46 Write Speed: 2,4x

I 19:52:46 Link Size: Auto

I 19:52:46 Lock Volume: Yes

I 19:52:46 Test Mode: No

I 19:52:46 OPC: No

I 19:52:46 BURN-Proof: Enabled

I 19:52:46 Write Speed Successfully Set! - Effective: 3.324 KB/s (2,4x)

I 19:52:46 Book Type Setting: DVD-ROM

I 19:52:46 User Specified L0 Data Zone Capacity: 1.913.760

I 19:53:26 Set L0 Data Zone Capacity Succeeded!

I 19:53:27 Filling Buffer... (40 MB)

I 19:53:28 Writing LeadIn...

I 19:53:30 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 19:53:30 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 19:53:30 Writing Layer 0... (LBA: 0 - 1913759)

W 20:14:57 Failed to Write Sectors 1901312 - 1901343 - Reason: No Seek Complete

W 20:14:57 Retrying (1 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:14:57 Retrying (2 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:14:57 Retrying (3 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:14:57 Retrying (4 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:14:57 Retrying (5 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:14:57 Retrying (6 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:14:57 Retrying (7 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:14:57 Retrying (8 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:14:57 Retrying (9 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:14:57 Retrying (10 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:14:57 Retrying (11 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:14:57 Retrying (12 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:14:57 Retrying (13 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:14:57 Retrying (14 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:14:57 Retrying (15 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:14:57 Retrying (16 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:14:57 Retrying (17 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:14:57 Retrying (18 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:14:57 Retrying (19 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:14:57 Retrying (20 of 20)...

W 20:14:57 Retry Failed - Reason: Invalid Address For Write

W 20:32:23 Retrying (21)...

W 20:32:23 Retry Failed - Reason: Invalid Address For Write

W 20:32:25 Retrying (22)...

W 20:32:25 Retry Failed - Reason: Invalid Address For Write

E 20:32:56 Failed to Write Sectors 1901312 - 1901343 - Reason: No Seek Complete

E 20:32:57 Next Writable Address: 1900800

I 20:32:57 Synchronising Cache...

I 20:33:09 Closing Track...

I 20:33:15 Finalising Disc...

Edited by noob mark
Link to comment
Share on other sites

Thanks for the reply.

While updating the firmware, my laptop crashed and, as you might guess, the writer is now unresponsive.

My laptop just doesn't notice a new device being plugged in (no changes in My Computer or Device Manager. The dvd tray doesn't open anymore when pushed on the button. The only thing that says that it's connected is the light from the SATA-USB converter.

Is there any way to spark some life back into the writer??

Link to comment
Share on other sites

It sounds pretty dead to me.

 

With some drives it might be possible but the tools just don't exist for LG drives.

 

Why did Vista crash? Does it do that often?

 

Try keeping it up-to-date... i.e. installing the service packs when they come out.

 

You should be on SP2 by now.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.