8ternity Posted January 19, 2011 Share Posted January 19, 2011 Hello, I've got many troubles to burn with IMGBURN from the version 2.5.2.0 to 2.5.5.0 to burn into UDF 2.50 with a Verbatim LHT BD-R 25GB 2X disc with my LG WH08LS20 and latest firmware. The burn pass with nero burning rom 10, all burn pass, but imgburn, it's all faild. in some previous month, i was able to burn 2-5 discs, but now it doesnt work anymore. Here the log of the error: I 21:46:17 ImgBurn Version 2.5.5.0 started! I 21:46:17 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 21:46:17 Total Physical Memory: 8,387,064 KB - Available: 4,322,660 KB W 21:46:17 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 21:46:17 Initialising SPTI... I 21:46:17 Searching for SCSI / ATAPI devices... I 21:46:17 -> Drive 1 - Info: HL-DT-ST BD-RE WH08LS20 2.00 (G:) (ATA) I 21:46:17 -> Drive 2 - Info: Optiarc DVD RW AD-7241S 1.03 (F:) (ATA) I 21:46:17 -> Drive 3 - Info: LIPQBWR P6BCXIJODAJ 1.03 (J:) (SCSI) I 21:46:17 Found 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 21:49:56 Operation Started! I 21:49:56 Building Image Tree... I 21:49:56 Calculating Totals... I 21:49:56 Preparing Image... I 21:49:57 Contents: 674 Files, 55 Folders I 21:49:57 Content Type: BD Video I 21:49:57 Data Type: MODE1/2048 I 21:49:57 File System(s): UDF (2.50) I 21:49:57 Volume Label: [Not Configured] I 21:49:57 Size: 24,051,191,678 bytes I 21:49:57 Sectors: 11,744,172 I 21:49:57 Image Size: 24,056,233,984 bytes I 21:49:57 Image Sectors: 11,746,208 I 21:49:57 Operation Successfully Completed! - Duration: 00:00:00 I 21:50:07 Operation Started! I 21:50:07 Building Image Tree... I 21:50:08 Calculating Totals... I 21:50:08 Preparing Image... I 21:50:08 Contents: 674 Files, 55 Folders I 21:50:08 Content Type: BD Video I 21:50:08 Data Type: MODE1/2048 I 21:50:08 File System(s): UDF (2.50) I 21:50:08 Volume Label: CCS1NNE1 I 21:50:08 Size: 24,051,191,678 bytes I 21:50:08 Sectors: 11,744,172 I 21:50:08 Image Size: 24,056,233,984 bytes I 21:50:08 Image Sectors: 11,746,208 I 21:50:08 Operation Successfully Completed! - Duration: 00:00:00 I 21:50:35 Operation Started! I 21:50:35 Building Image Tree... I 21:50:35 Calculating Totals... I 21:50:35 Preparing Image... I 21:50:35 Contents: 674 Files, 55 Folders I 21:50:35 Content Type: BD Video I 21:50:35 Data Type: MODE1/2048 I 21:50:35 File System(s): UDF (2.50) I 21:50:35 Volume Label: CCS1NNE1 I 21:50:36 Size: 24,051,191,678 bytes I 21:50:36 Sectors: 11,744,172 I 21:50:36 Image Size: 24,056,233,984 bytes I 21:50:36 Image Sectors: 11,746,208 I 21:50:37 Operation Successfully Completed! - Duration: 00:00:02 I 21:50:37 Operation Started! I 21:50:37 Source File: -==/\/[bUILD IMAGE]\/\==- I 21:50:37 Source File Sectors: 11,746,208 (MODE1/2048) I 21:50:37 Source File Size: 24,056,233,984 bytes I 21:50:37 Source File Volume Identifier: CCS1NNE1 I 21:50:37 Source File Volume Set Identifier: 3E32AE5100B3382C I 21:50:37 Source File Application Identifier: ImgBurn v2.5.5.0 I 21:50:37 Source File Implementation Identifier: ImgBurn I 21:50:37 Source File File System(s): UDF (2.50) I 21:50:37 Destination Device: [3:0:0] HL-DT-ST BD-RE WH08LS20 2.00 (G:) (ATA) I 21:50:37 Destination Media Type: BD-R (Disc ID: VERBAT-IMw-000) (Speeds: 2x) I 21:50:37 Destination Media Sectors: 12,219,392 I 21:50:37 Write Mode: BD I 21:50:37 Write Type: DAO I 21:50:37 Write Speed: 2x I 21:50:37 BD-R Verify Not Required: Yes I 21:50:37 Link Size: Auto I 21:50:37 Lock Volume: Yes I 21:50:37 Test Mode: No I 21:50:37 OPC: No I 21:50:37 BURN-Proof: Enabled I 21:50:37 Write Speed Successfully Set! - Effective: 8,991 KB/s (2x) I 21:50:48 Filling Buffer... (40 MB) I 21:50:50 Writing LeadIn... W 21:50:58 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error W 21:50:58 Retrying (1 of 20)... W 21:51:06 Retry Failed - Reason: Power Calibration Area Error W 21:51:06 Retrying (2 of 20)... W 21:51:13 Retry Failed - Reason: Power Calibration Area Error W 21:51:13 Retrying (3 of 20)... W 21:51:21 Retry Failed - Reason: Power Calibration Area Error W 21:51:21 Retrying (4 of 20)... W 21:51:29 Retry Failed - Reason: Power Calibration Area Error W 21:51:29 Retrying (5 of 20)... W 21:51:36 Retry Failed - Reason: Power Calibration Area Error W 21:51:36 Retrying (6 of 20)... W 21:51:44 Retry Failed - Reason: Power Calibration Area Error W 21:51:44 Retrying (7 of 20)... W 21:51:52 Retry Failed - Reason: Power Calibration Area Error W 21:51:52 Retrying (8 of 20)... W 21:51:59 Retry Failed - Reason: Power Calibration Area Error W 21:51:59 Retrying (9 of 20)... W 21:52:07 Retry Failed - Reason: Power Calibration Area Error W 21:52:07 Retrying (10 of 20)... I 21:52:10 Abort Request Acknowledged W 21:52:14 Retry Failed - Reason: Power Calibration Area Error E 21:52:15 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error I 21:52:15 Synchronising Cache... W 21:52:19 User opted to skip the 'Close Track/Session/Disc' functions. E 21:52:19 Failed to Write Image! E 21:52:19 Operation Failed! - Duration: 00:01:42 I 21:52:19 Average Write Rate: N/A - Maximum Write Rate: N/A If i could had some help with that issue, i will appreciate, i very like the program and use it from a a long time. If you need dvdinfo on a burned disc with nero, i can provide it as well. thanks!! 8ternity Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 19, 2011 Share Posted January 19, 2011 This is a drive issue. It has complete control over the success / failure of a burn. If your drive is being overly fussy, try changing the 'Write Type' to 'Incremental' in the settings (rather than 'DAO/SAO'). That setting shouldn't make the difference between it working and not working, but sometimes it does. (and it works both ways - sometimes DAO/SAO will work where Incremental doesn't) Put service pack 3 on for XP too. Link to comment Share on other sites More sharing options...
8ternity Posted January 19, 2011 Author Share Posted January 19, 2011 This is a drive issue. It has complete control over the success / failure of a burn. If your drive is being overly fussy, try changing the 'Write Type' to 'Incremental' in the settings (rather than 'DAO/SAO'). That setting shouldn't make the difference between it working and not working, but sometimes it does. (and it works both ways - sometimes DAO/SAO will work where Incremental doesn't) Put service pack 3 on for XP too. I will try this and let you know as soon as i try another burn. Im in Windows 7 professional 64bit edition; with all windows updates up to date; even for directx updates. Thanks!! 8ternity Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 19, 2011 Share Posted January 19, 2011 Im in Windows 7 professional 64bit edition; with all windows updates up to date; even for directx updates. Well then you need to stop messing with the compatibility settings I 21:46:17 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) Link to comment Share on other sites More sharing options...
8ternity Posted January 19, 2011 Author Share Posted January 19, 2011 (edited) Im in Windows 7 professional 64bit edition; with all windows updates up to date; even for directx updates. Well then you need to stop messing with the compatibility settings I 21:46:17 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I've not touch it at all! But windows update has installed yesturday an windows update. I've not reboot over 10 days, not yesturday or today too! very strage... i restart the application right now; W 09:59:31 Operating System has been changed! I 09:59:31 ImgBurn Version 2.5.5.0 started! I 09:59:31 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7600) I 09:59:31 Total Physical Memory: 8,387,064 KB - Available: 920,116 KB W 09:59:31 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 09:59:31 Initialising SPTI... I 09:59:31 Searching for SCSI / ATAPI devices... I 09:59:31 -> Drive 1 - Info: HL-DT-ST BD-RE WH08LS20 2.00 (G:) (ATA) I 09:59:31 -> Drive 2 - Info: Optiarc DVD RW AD-7241S 1.03 (F:) (ATA) I 09:59:31 -> Drive 3 - Info: LIPQBWR P6BCXIJODAJ 1.03 (J:) (SCSI) I 09:59:31 Found 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM and 1 BD-RE! The Only one modification that i've changed this morning is the "Incremential" settings, saved, and exit the application. How could i change the os version?? lol! Probably with the compatibily os setting, but i never change it. strannnnnnnnge?? I 21:46:17 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 21:46:17 Total Physical Memory: 8,387,064 KB - Available: 4,322,660 KB and I 09:59:31 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7600) I 09:59:31 Total Physical Memory: 8,387,064 KB - Available: 920,116 KB I know windows update has installed an windows update yesturday; http://support.microsoft.com/kb/976902 This software update will be a prerequisite to install service packs. Additionally, this update improves reliability when you install or remove Windows 7 and Windows Server 2008 R2 updates and service packs. EDIT: I've start another burn with the "Incremential" setting and the burn has started. *good thing* ;-)... i will let you know when i will had burned some more. Thanks for help! Edited January 19, 2011 by 8ternity Link to comment Share on other sites More sharing options...
Recommended Posts