Jump to content

Spindle Servo Failure with Verbatim DL


obachini

Recommended Posts

Had the same problem yesterday but with cheap discs so tried using Verbatim but no luck still. Both times it has happened at exactly 50%.

 

Any help/ideas about the problem would be appreciated, cheers.

 

 

 

 

 

 

 

I 10:10:56 ImgBurn Version 2.5.5.0 started!

I 10:10:56 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 10:10:56 Total Physical Memory: 2,086,272 KB - Available: 1,085,672 KB

W 10:10:56 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 10:10:56 Initialising SPTI...

I 10:10:56 Searching for SCSI / ATAPI devices...

I 10:10:56 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-4084N KQ09 (D:) (ATA)

I 10:10:56 Found 1 DVD±RW/RAM!

W 10:11:22 Device Arrival Detected!

I 10:11:22 Searching for SCSI / ATAPI devices...

I 10:11:22 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-4084N KQ09 (D:) (ATA)

I 10:11:22 -> Drive 2 - Info: HL-DT-ST DVDRAM GE20NU11 CN01 (F:) (USB)

I 10:11:22 Found 2 DVD±RW/RAMs!

I 10:13:04 Operation Started!

I 10:13:04 Source File: C:\Users\Oli\Skate 3\c-skate3.dvd

I 10:13:04 Source File Sectors: 3,827,488 (MODE1/2048)

I 10:13:04 Source File Size: 7,838,695,424 bytes

I 10:13:05 Source File Volume Identifier: DVD_ROM

I 10:13:05 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 10:13:05 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 10:13:05 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 10:13:05 Source File File System(s): ISO9660, UDF (1.50)

I 10:13:05 Destination Device: [0:0:0] HL-DT-ST DVDRAM GE20NU11 CN01 (F:) (USB)

I 10:13:05 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 10:13:05 Destination Media Sectors: 4,173,824

I 10:13:05 Write Mode: DVD

I 10:13:05 Write Type: DAO

I 10:13:05 Write Speed: 2.4x

I 10:13:05 Link Size: Auto

I 10:13:05 Lock Volume: Yes

I 10:13:05 Test Mode: No

I 10:13:05 OPC: No

I 10:13:05 BURN-Proof: Enabled

I 10:13:05 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)

I 10:13:05 Book Type Setting: DVD-ROM

I 10:13:05 User Specified L0 Data Zone Capacity: 1,913,760

W 10:13:05 L0 Data Zone Capacity Miscompare!

W 10:13:05 Wanted: 1913760, Got: 2086912

I 10:13:05 Filling Buffer... (40 MB)

I 10:13:08 Writing LeadIn...

I 10:13:42 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 10:13:42 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 10:13:42 Writing Layer 0... (LBA: 0 - 1913759)

I 10:33:19 Writing Layer 1... (LBA: 1913760 - 3827487)

W 10:33:22 Failed to Write Sectors 1920480 - 1920511 - Reason: Spindle Servo Failure

W 10:33:22 Retrying (1 of 20)...

W 10:33:22 Retry Failed - Reason: Spindle Servo Failure

W 10:33:22 Retrying (2 of 20)...

W 10:33:22 Retry Failed - Reason: Invalid Address For Write

W 10:33:22 Retrying (3 of 20)...

W 10:33:22 Retry Failed - Reason: Invalid Address For Write

W 10:33:22 Retrying (4 of 20)...

W 10:33:22 Retry Failed - Reason: Invalid Address For Write

W 10:33:22 Retrying (5 of 20)...

W 10:33:22 Retry Failed - Reason: Invalid Address For Write

W 10:33:22 Retrying (6 of 20)...

W 10:33:22 Retry Failed - Reason: Invalid Address For Write

W 10:33:22 Retrying (7 of 20)...

W 10:33:22 Retry Failed - Reason: Invalid Address For Write

W 10:33:22 Retrying (8 of 20)...

W 10:33:22 Retry Failed - Reason: Invalid Address For Write

W 10:33:22 Retrying (9 of 20)...

W 10:33:22 Retry Failed - Reason: Invalid Address For Write

W 10:33:22 Retrying (10 of 20)...

W 10:33:22 Retry Failed - Reason: Invalid Address For Write

W 10:33:22 Retrying (11 of 20)...

W 10:33:22 Retry Failed - Reason: Invalid Address For Write

W 10:33:22 Retrying (12 of 20)...

W 10:33:22 Retry Failed - Reason: Invalid Address For Write

W 10:33:22 Retrying (13 of 20)...

W 10:33:22 Retry Failed - Reason: Invalid Address For Write

W 10:33:22 Retrying (14 of 20)...

W 10:33:22 Retry Failed - Reason: Invalid Address For Write

W 10:33:22 Retrying (15 of 20)...

W 10:33:22 Retry Failed - Reason: Invalid Address For Write

W 10:33:22 Retrying (16 of 20)...

W 10:33:22 Retry Failed - Reason: Invalid Address For Write

W 10:33:22 Retrying (17 of 20)...

W 10:33:22 Retry Failed - Reason: Invalid Address For Write

W 10:33:22 Retrying (18 of 20)...

W 10:33:22 Retry Failed - Reason: Invalid Address For Write

W 10:33:22 Retrying (19 of 20)...

W 10:33:22 Retry Failed - Reason: Invalid Address For Write

W 10:33:22 Retrying (20 of 20)...

W 10:33:22 Retry Failed - Reason: Invalid Address For Write

W 10:33:43 Retrying (21)...

W 10:33:43 Retry Failed - Reason: Invalid Address For Write

W 10:33:44 Retrying (22)...

W 10:33:45 Retry Failed - Reason: Invalid Address For Write

W 10:33:45 Retrying (23)...

W 10:33:45 Retry Failed - Reason: Invalid Address For Write

E 10:33:46 Failed to Write Sectors 1920480 - 1920511 - Reason: Spindle Servo Failure

E 10:33:46 Next Writable Address: 1919936

I 10:33:46 Synchronising Cache...

W 10:33:51 User opted to skip the 'Close Track/Session/Disc' functions.

E 10:33:51 Failed to Write Image!

I 10:33:51 Exporting Graph Data...

I 10:33:51 Graph Data File: C:\Users\Oli\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GE20NU11_CN01_28-JANUARY-2011_10-13_MKM-003-00_2.4x.ibg

I 10:33:51 Export Successfully Completed!

E 10:33:52 Operation Failed! - Duration: 00:20:46

I 10:33:52 Average Write Rate: 3,190 KB/s (2.3x) - Maximum Write Rate: 6,175 KB/s (4.5x)

Edited by obachini
Link to comment
Share on other sites

thanks for the reply, I tried burning at 4x which seemed to work until the disc tried to finalise. I put the disc in my xbox and nothing, just said reading and then went back to open tray:

 

 

 

I 15:17:49 ImgBurn Version 2.5.5.0 started!

I 15:17:49 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 15:17:49 Total Physical Memory: 2,086,272 KB - Available: 984,148 KB

W 15:17:49 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 15:17:49 Initialising SPTI...

I 15:17:49 Searching for SCSI / ATAPI devices...

I 15:17:49 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-4084N KQ09 (D:) (ATA)

I 15:17:49 Found 1 DVD±RW/RAM!

W 15:18:16 Device Arrival Detected!

I 15:18:16 Searching for SCSI / ATAPI devices...

I 15:18:16 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-4084N KQ09 (D:) (ATA)

I 15:18:16 -> Drive 2 - Info: HL-DT-ST DVDRAM GE20NU11 CN01 (F:) (USB)

I 15:18:16 Found 2 DVD±RW/RAMs!

I 15:18:45 Operation Started!

I 15:18:45 Source File: C:\Users\Oli\FiFA 11\FiFA 11.dvd

I 15:18:45 Source File Sectors: 3,827,488 (MODE1/2048)

I 15:18:45 Source File Size: 7,838,695,424 bytes

I 15:18:45 Source File Volume Identifier: DVD_ROM

I 15:18:45 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 15:18:45 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 15:18:45 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 15:18:45 Source File File System(s): ISO9660, UDF (1.50)

I 15:18:45 Destination Device: [0:0:0] HL-DT-ST DVDRAM GE20NU11 CN01 (F:) (USB)

I 15:18:45 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 15:18:45 Destination Media Sectors: 4,173,824

I 15:18:45 Write Mode: DVD

I 15:18:45 Write Type: DAO

I 15:18:45 Write Speed: 4x

I 15:18:45 Link Size: Auto

I 15:18:45 Lock Volume: Yes

I 15:18:45 Test Mode: No

I 15:18:45 OPC: No

I 15:18:45 BURN-Proof: Enabled

I 15:18:45 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)

I 15:18:45 Book Type Setting: DVD-ROM

I 15:18:45 User Specified L0 Data Zone Capacity: 1,913,760

W 15:18:45 L0 Data Zone Capacity Miscompare!

W 15:18:45 Wanted: 1913760, Got: 2086912

I 15:18:46 Filling Buffer... (40 MB)

I 15:18:48 Writing LeadIn...

I 15:19:37 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 15:19:37 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 15:19:37 Writing Layer 0... (LBA: 0 - 1913759)

I 15:31:24 Writing Layer 1... (LBA: 1913760 - 3827487)

I 15:43:13 Synchronising Cache...

I 15:43:14 Closing Track...

I 15:43:32 Finalising Disc...

W 15:43:39 Potential 'WaitImmediateIO' Deferred Error - (13%, 0/3) - Spindle Servo Failure

W 15:43:39 Finalise Disc Failed! - Reason: Spindle Servo Failure

W 15:43:39 Retrying (1 of 3)...

I 15:43:40 Exporting Graph Data...

I 15:43:40 Graph Data File: C:\Users\Oli\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GE20NU11_CN01_28-JANUARY-2011_15-18_MKM-003-00_4x.ibg

I 15:43:40 Export Successfully Completed!

I 15:43:40 Operation Successfully Completed! - Duration: 00:24:55

I 15:43:40 Average Write Rate: 5,409 KB/s (3.9x) - Maximum Write Rate: 5,577 KB/s (4.0x)

Edited by obachini
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.