Ninguno Posted January 30, 2011 Share Posted January 30, 2011 (edited) I burnt data onto a DVD-R using Nero Express Essentials. When inserted into the drive it shows as empty. However another application shows me the files I burnt on there but I can't access them. ImgBurn provides these details about the disk: LITE-ON DVDRW LH-20A1P KL0P (ATA) Current Profile: DVD-R Disc Information: Status: Incomplete State of Last Session: Incomplete Erasable: No Sessions: 1 Free Sectors: 122,640 Free Space: 251,166,720 bytes Free Time: 27:17:15 (MM:SS:FF) Next Writable Address: 2175248 Track Information: Session 1... -> Track 01 (LTSA: 0, LTS: 2297888, LRA: 2175231) Pre-recorded Information: Manufacturer ID: MCC 03RG20 Physical Format Information (Last Recorded): Disc ID: 0@P-!-00 Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,324,735 Last Physical Sector in Layer 0: 0 If I try to close the disk using Tools > Drive > Close > Disc, I get "I/O error! Invalid field in parameter list". Is there a way I can close this disc and access the files on it? I might add that this is unusual, I have successfully burnt many discs using Nero, this is the first time I've had this problem. Subsequent burns were also successful. Edited January 30, 2011 by Ninguno Link to comment Share on other sites More sharing options...
mmalves Posted January 30, 2011 Share Posted January 30, 2011 Try Tools -> Drive -> Close Track / Session / Disc (in that order). If it doesn't work then you should use IsoBuster to extract your files. Link to comment Share on other sites More sharing options...
Ninguno Posted January 30, 2011 Author Share Posted January 30, 2011 (edited) Try Tools -> Drive -> Close Track / Session / Disc (in that order). I have tried that already. If it doesn't work then you should use IsoBuster to extract your files. I will download IsoBuster as you suggest. Edited January 30, 2011 by Ninguno Link to comment Share on other sites More sharing options...
Ninguno Posted January 30, 2011 Author Share Posted January 30, 2011 OK. IsoBuster allowed me to transfer the files to my hard drive and I have now burnt them to another disc, and verified the burn which was fine. So thanks for that mmalves. Out of interest, were my attempts at trying to close the failed disk doomed to failure? My theory was that the disc had somehow not been closed, so my initial focus was on trying to find software that would close it and that would then allow me to read the files. Link to comment Share on other sites More sharing options...
Recommended Posts