Jump to content

Video jerky after burn

brandyboy

By brandyboy
in ImgBurn Support

 Share

Recommended Posts

brandyboy ISF Newbie

brandyboy

Posted
Posted

I`ve burnt several mkv files to disc using tsMuxerGUI to remux to AVCHD and Imgburn to burn to DVD9 D/L. I burn at the lowest speed..2x. The resulting video is very slightly jerky now and again and sometimes freezes for a second or two. Any suggestions please.

Link to comment
Share on other sites
brandyboy ISF Newbie

brandyboy

Posted
  • Author
Posted

I 16:24:56 ImgBurn Version 2.5.5.0 started!

I 16:24:56 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)

I 16:24:56 Total Physical Memory: 2,095,532 KB - Available: 1,380,736 KB

I 16:24:56 Initialising SPTI...

I 16:24:56 Searching for SCSI / ATAPI devices...

I 16:24:56 -> Drive 1 - Info: PIONEER BD-RW BDR-205 1.08 (D:) (ATA)

I 16:24:56 -> Drive 2 - Info: HL-DT-ST DVDRAM GSA-E40N RE02 (F:) (USB)

I 16:24:56 Found 1 DVD±RW/RAM and 1 BD-RE!

I 16:24:56 Project Successfully Loaded!

I 16:24:56 File Name: c:\multiAVCHD\_TEMP\multiTEMP-20110220\20110220-162454-imgburn.ibb

I 16:50:22 Operation Started!

I 16:50:22 Building Image Tree...

I 16:50:22 Calculating Totals...

I 16:50:22 Preparing Image...

I 16:50:22 Contents: 47 Files, 8 Folders

I 16:50:22 Content Type: BD Video

I 16:50:22 Data Type: MODE1/2048

I 16:50:22 File System(s): UDF (2.50)

I 16:50:22 Volume Label: multiAVCHD

I 16:50:22 Size: 7,550,593,734 bytes

I 16:50:22 Sectors: 3,686,840

I 16:50:22 Image Size: 7,551,647,744 bytes

I 16:50:22 Image Sectors: 3,687,328

I 16:50:24 Operation Successfully Completed! - Duration: 00:00:02

I 16:50:24 Operation Started!

I 16:50:24 Source File: -==/\/[bUILD IMAGE]\/\==-

I 16:50:24 Source File Sectors: 3,687,328 (MODE1/2048)

I 16:50:24 Source File Size: 7,551,647,744 bytes

I 16:50:24 Source File Volume Identifier: multiAVCHD

I 16:50:24 Source File Volume Set Identifier: 3E54864B00384328

I 16:50:24 Source File Application Identifier: multiAVCHD v4.1 (build

I 16:50:24 Source File Implementation Identifier: ImgBurn

I 16:50:24 Source File File System(s): UDF (2.50)

I 16:50:24 Destination Device: [3:0:0] PIONEER BD-RW BDR-205 1.08 (D:) (ATA)

I 16:50:24 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x, 6x, 8x)

I 16:50:24 Destination Media Sectors: 4,173,824

I 16:50:24 Write Mode: DVD

I 16:50:24 Write Type: DAO

I 16:50:24 Write Speed: 2x

I 16:50:24 Link Size: Auto

I 16:50:24 Lock Volume: Yes

I 16:50:24 Test Mode: No

I 16:50:24 OPC: No

I 16:50:24 BURN-Proof: Enabled

W 16:50:24 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x)

I 16:50:24 Advanced Settings - Optimal Writing Speed: No

I 16:50:24 Optimal L0 Data Zone Capacity: 1,843,664

I 16:50:24 Optimal L0 Data Zone Method: ECC Block Boundary

I 16:50:51 Set L0 Data Zone Capacity Succeeded!

I 16:50:52 Filling Buffer... (40 MB)

I 16:50:53 Writing LeadIn...

I 16:50:54 Writing Session 1 of 1... (1 Track, LBA: 0 - 3687327)

I 16:50:54 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3687327)

I 16:50:54 Writing Layer 0... (LBA: 0 - 1843663)

I 17:10:04 Writing Layer 1... (LBA: 1843664 - 3687327)

I 17:29:21 Synchronising Cache...

I 17:29:22 Closing Track...

I 17:29:24 Finalising Disc...

I 17:30:21 Exporting Graph Data...

I 17:30:21 Graph Data File: C:\Documents and Settings\Owner\Application Data\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-205_1.08_20-FEBRUARY-2011_16-50_RICOHJPN-D01-67_2x.ibg

I 17:30:21 Export Successfully Completed!

I 17:30:21 Operation Successfully Completed! - Duration: 00:39:56

I 17:30:21 Average Write Rate: 3,196 KB/s (2.3x) - Maximum Write Rate: 3,360 KB/s (2.4x)

Link to comment
Share on other sites
brandyboy ISF Newbie

brandyboy

Posted
  • Author
Posted

I`ve done as suggested but I`m stiil getting momentary freezes and slight jerkiness.The Bluray player is brand new Sony BDP S370.

 

Could I make any adjustments in Imgburn.

 

 

21:00:05 ImgBurn Version 2.5.5.0 started!

I 21:00:05 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)

I 21:00:05 Total Physical Memory: 2,095,532 KB - Available: 1,410,260 KB

I 21:00:05 Initialising SPTI...

I 21:00:05 Searching for SCSI / ATAPI devices...

I 21:00:05 -> Drive 1 - Info: PIONEER BD-RW BDR-205 1.11 (D:) (ATA)

I 21:00:06 -> Drive 2 - Info: HL-DT-ST DVDRAM GSA-E40N RE02 (F:) (USB)

I 21:00:06 Found 1 DVD±RW/RAM and 1 BD-RE!

I 21:02:17 Operation Started!

I 21:02:17 Building Image Tree...

I 21:02:19 Calculating Totals...

I 21:02:19 Preparing Image...

I 21:02:19 Contents: 9 Files, 14 Folders

I 21:02:19 Content Type: BD Video

I 21:02:19 Data Type: MODE1/2048

I 21:02:19 File System(s): UDF (2.50)

I 21:02:19 Volume Label: Films

I 21:02:19 Size: 4,966,465,356 bytes

I 21:02:19 Sectors: 2,425,038

I 21:02:19 Image Size: 4,967,333,888 bytes

I 21:02:19 Image Sectors: 2,425,456

E 21:02:32 Operation Aborted! - Duration: 00:00:15

I 21:03:36 Operation Started!

I 21:03:36 Building Image Tree...

I 21:03:39 Calculating Totals...

I 21:03:39 Preparing Image...

I 21:03:39 Contents: 9 Files, 14 Folders

I 21:03:39 Content Type: BD Video

I 21:03:39 Data Type: MODE1/2048

I 21:03:39 File System(s): UDF (2.50)

I 21:03:39 Volume Label: Films

I 21:03:39 Size: 4,966,465,356 bytes

I 21:03:39 Sectors: 2,425,038

I 21:03:39 Image Size: 4,967,333,888 bytes

I 21:03:39 Image Sectors: 2,425,456

I 21:03:43 Operation Successfully Completed! - Duration: 00:00:07

I 21:03:44 Operation Started!

I 21:03:44 Source File: -==/\/[bUILD IMAGE]\/\==-

I 21:03:44 Source File Sectors: 2,425,456 (MODE1/2048)

I 21:03:44 Source File Size: 4,967,333,888 bytes

I 21:03:44 Source File Volume Identifier: Films

I 21:03:44 Source File Volume Set Identifier: 3E54A8720025021E

I 21:03:44 Source File Application Identifier: ImgBurn v2.5.5.0

I 21:03:44 Source File Implementation Identifier: ImgBurn

I 21:03:44 Source File File System(s): UDF (2.50)

I 21:03:44 Destination Device: [3:0:0] PIONEER BD-RW BDR-205 1.11 (D:) (ATA)

I 21:03:44 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 21:03:44 Destination Media Sectors: 4,173,824

I 21:03:44 Write Mode: DVD

I 21:03:44 Write Type: DAO

I 21:03:44 Write Speed: 1x

I 21:03:44 Link Size: Auto

I 21:03:44 Lock Volume: Yes

I 21:03:44 Test Mode: No

I 21:03:44 OPC: No

I 21:03:44 BURN-Proof: Enabled

W 21:03:44 Write Speed Miscompare! - Wanted: 1,385 KB/s (1x), Got: 3,324 KB/s (2.4x)

I 21:03:44 Advanced Settings - Optimal Writing Speed: No

I 21:03:44 Optimal L0 Data Zone Capacity: 1,212,736

I 21:03:44 Optimal L0 Data Zone Method: ECC Block Boundary

I 21:04:05 Set L0 Data Zone Capacity Succeeded!

I 21:04:05 Filling Buffer... (40 MB)

I 21:04:06 Writing LeadIn...

I 21:04:07 Writing Session 1 of 1... (1 Track, LBA: 0 - 2425455)

I 21:04:07 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2425455)

I 21:04:07 Writing Layer 0... (LBA: 0 - 1212735)

I 21:16:42 Writing Layer 1... (LBA: 1212736 - 2425455)

I 21:29:24 Synchronising Cache...

I 21:29:25 Closing Track...

I 21:29:27 Finalising Disc...

I 21:30:23 Exporting Graph Data...

I 21:30:23 Graph Data File: C:\Documents and Settings\Owner\Application Data\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-205_1.11_20-FEBRUARY-2011_21-03_MKM-003-00_1x.ibg

I 21:30:23 Export Successfully Completed!

I 21:30:23 Operation Successfully Completed! - Duration: 00:26:39

Link to comment
Share on other sites
ianymaty ISF God

ianymaty

Posted
Posted
I 21:03:44 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 21:03:44 Write Speed: 1x

W 21:03:44 Write Speed Miscompare! - Wanted: 1,385 KB/s (1x), Got: 3,324 KB/s (2.4x)

1x is not an option here, it was burned at 2.4x and you disabled the verify so we can't realy know if it was a decent burn.

 

Burn one disc at 8x (than lower if the problem persist) and leave the verify enabled, you are using 8x rated media after all.

 

Post back a log with burn and verify enabled.

 

There is a firmware update for your player on Sony site http://esupport.sony.com/CA/perl/swu-list.pl?mdl=BDPS370&SelectOS=42#div_pos_30

Link to comment
Share on other sites
brandyboy ISF Newbie

brandyboy

Posted
  • Author
Posted (edited)

Okay. I`ve done as suggested. I`ve upgraded the firmware for Bluray burner and player and using Verbatim DVD+R DL discs. I`ve tried burn speeds from 2x to 8x. But the burnt video stll freezes for a few seconds every 10 minutes or so. The m2ts file from the BMVD folder plays perfect in VLC. I`ve tried taking that and remuxing it again, then burning with Imgburn. Same result. Is there anyway I can burn this file straight a DVD9 as a AVCHD file. I`m gettin fed up of throwing discs away !!!

 

 

I 09:14:41 ImgBurn Version 2.5.5.0 started!

I 09:14:41 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)

I 09:14:41 Total Physical Memory: 2,095,532 KB - Available: 1,583,616 KB

I 09:14:41 Initialising SPTI...

I 09:14:41 Searching for SCSI / ATAPI devices...

I 09:14:41 -> Drive 1 - Info: PIONEER BD-RW BDR-205 1.11 (D:) (ATA)

I 09:14:42 -> Drive 2 - Info: HL-DT-ST DVDRAM GSA-E40N RE02 (F:) (USB)

I 09:14:42 Found 1 DVD±RW/RAM and 1 BD-RE!

I 09:15:39 Operation Started!

I 09:15:39 Building Image Tree...

I 09:15:48 Calculating Totals...

I 09:15:48 Preparing Image...

I 09:15:48 Contents: 14 Files, 14 Folders

I 09:15:48 Content Type: BD Video

I 09:15:48 Data Type: MODE1/2048

I 09:15:48 File System(s): UDF (2.50)

I 09:15:48 Volume Label: Films

I 09:15:48 Size: 7,563,234,580 bytes

I 09:15:48 Sectors: 3,692,994

I 09:15:48 Image Size: 7,564,132,352 bytes

I 09:15:48 Image Sectors: 3,693,424

I 09:15:53 Operation Successfully Completed! - Duration: 00:00:13

I 09:15:53 Operation Started!

I 09:15:53 Source File: -==/\/[bUILD IMAGE]\/\==-

I 09:15:53 Source File Sectors: 3,693,424 (MODE1/2048)

I 09:15:53 Source File Size: 7,564,132,352 bytes

I 09:15:53 Source File Volume Identifier: Films

I 09:15:53 Source File Volume Set Identifier: 3E5849F300385B12

I 09:15:53 Source File Application Identifier: ImgBurn v2.5.5.0

I 09:15:53 Source File Implementation Identifier: ImgBurn

I 09:15:53 Source File File System(s): UDF (2.50)

I 09:15:53 Destination Device: [3:0:0] PIONEER BD-RW BDR-205 1.11 (D:) (ATA)

I 09:15:53 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 09:15:53 Destination Media Sectors: 4,173,824

I 09:15:53 Write Mode: DVD

I 09:15:53 Write Type: DAO

I 09:15:53 Write Speed: 6x

I 09:15:53 Link Size: Auto

I 09:15:53 Lock Volume: Yes

I 09:15:53 Test Mode: No

I 09:15:53 OPC: No

I 09:15:53 BURN-Proof: Enabled

I 09:15:53 Write Speed Successfully Set! - Effective: 8,310 KB/s (6x)

I 09:15:53 Advanced Settings - Optimal Writing Speed: No

I 09:15:53 Optimal L0 Data Zone Capacity: 1,846,720

I 09:15:53 Optimal L0 Data Zone Method: ECC Block Boundary

I 09:16:20 Set L0 Data Zone Capacity Succeeded!

I 09:16:20 Filling Buffer... (40 MB)

I 09:16:21 Writing LeadIn...

I 09:16:29 Writing Session 1 of 1... (1 Track, LBA: 0 - 3693423)

I 09:16:29 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3693423)

I 09:16:29 Writing Layer 0... (LBA: 0 - 1846719)

I 09:24:08 Writing Layer 1... (LBA: 1846720 - 3693423)

I 09:32:02 Synchronising Cache...

I 09:32:03 Closing Track...

I 09:32:10 Finalising Disc...

I 09:32:52 Exporting Graph Data...

I 09:32:52 Graph Data File: C:\Documents and Settings\Owner\Application Data\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-205_1.11_24-FEBRUARY-2011_09-15_MKM-003-00_6x.ibg

I 09:32:52 Export Successfully Completed!

I 09:32:52 Operation Successfully Completed! - Duration: 00:16:59

I 09:32:52 Average Write Rate: 7,917 KB/s (5.7x) - Maximum Write Rate: 8,375 KB/s (6.0x)

I 09:32:52 Cycling Tray before Verify...

I 09:33:11 Device Ready!

I 09:33:12 Operation Started!

I 09:33:12 Source Device: [3:0:0] PIONEER BD-RW BDR-205 1.11 (D:) (ATA)

I 09:33:12 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 09:33:12 Image File: -==/\/[bUILD IMAGE]\/\==-

I 09:33:12 Image File Sectors: 3,693,424 (MODE1/2048)

I 09:33:12 Image File Size: 7,564,132,352 bytes

I 09:33:12 Image File Volume Identifier: Films

I 09:33:12 Image File Volume Set Identifier: 3E5849F300385B12

I 09:33:12 Image File Application Identifier: ImgBurn v2.5.5.0

I 09:33:12 Image File Implementation Identifier: ImgBurn

I 09:33:12 Image File File System(s): UDF (2.50)

I 09:33:12 Read Speed (Data/Audio): MAX / MAX

I 09:33:12 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3693423)

I 09:33:12 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3693423)

I 09:33:12 Verifying Layer 0... (LBA: 0 - 1846719)

I 09:38:35 Verifying Layer 1... (LBA: 1846720 - 3693423)

I 09:44:58 Exporting Graph Data...

I 09:44:59 Graph Data File: C:\Documents and Settings\Owner\Application Data\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-205_1.11_24-FEBRUARY-2011_09-15_MKM-003-00_6x.ibg

I 09:44:59 Export Successfully Completed!

I 09:44:59 Operation Successfully Completed! - Duration: 00:11:46

I 09:44:59 Average Verify Rate: 10,462 KB/s (7.6x) - Maximum Verify Rate: 16,692 KB/s (12.1x)

Edited by brandyboy
Link to comment
Share on other sites
ianymaty ISF God

ianymaty

Posted
Posted

The burn and verify looks good, ImgBurn has done its job perfectly.

 

The problem may be in BD stucture. I don't now how its working a BD, yet.

 

Does the disc play nice reading from BD burner played with a software player like Power DVD or Total Media Theatre? If yes the disc is OK.

 

If not, try this: Build the image on your hard drive, mount it in a virtual drive and play it in Power DVD or Total Media Theatre.

 

Does it play nice from the image? If it play nice the structure is OK and the problem is your player.

 

Note that when I say play I mean the disc as a BD structure not the m2ts from the folder.

 

I've seen recommended multiAVCHD for authoring.

Link to comment
Share on other sites
brandyboy ISF Newbie

brandyboy

Posted
  • Author
Posted

Hi. Yes it played okay with Total Media Theatre. I get the same problem with multiAVCHD.

 

Not sure what to do now. The player plays ordinary Bluray discs with no problem.

 

Oh well back to the drawing board.

 

Thanks for all of your help.

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept