landontc Posted April 8, 2011 Share Posted April 8, 2011 (edited) I've had this drive working perfectly in my Windows 7 x64 environment for quite some time. This drive is attached to a VIA 6421 SATA/IDE adapter on the IDE slot. I've gone through all the various drivers for the VIA 6421 card as that is the only thing that I can think of that would have changed when I reinstalled Windows. However, I recently reloaded windows and have had nothing but trouble since then. About half the time it hangs at Searching for SCSI/ATAPI devices and the other half it finds the drive but then says Not Ready No Additional Sense Info (or something close to that). If I let it sit for a long time, it will go very slowly through things like "Getting Capabilities" etc., but this is taking several minutes to happen. This is the debug log currently with it now sitting at "Getting Capabilities." You can see the three minute gap between "Interpretation Inquiry" and the next line. I 20:11:30 ImgBurn Version 2.5.5.0 started! I 20:11:30 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 20:11:30 Total Physical Memory: 6,290,680 KB - Available: 4,812,024 KB W 20:11:30 I/O Interface 'Debug Mode' Enabled! I 20:11:30 Initialising SPTI... I 20:11:30 Searching for SCSI / ATAPI devices... I 20:11:30 Initialising Device (\\?\scsi#cdrom&ven_atapi&prod_dvd_a__dh20a4p#5&8261e57&2&000400#{53f56308-b6bf-11d0-94f2-00a0c91efb8b})... I 20:12:55 Device Address: [4:4:0] I 20:12:55 Drive Letter: (D:) I 20:12:55 Device Maximum Transfer Length: 65,536 I 20:12:55 Device Maximum Physical Pages: 17 I 20:12:55 Device Alignment Mask: 1 I 20:12:55 Device Bus Type (Adapter/Device): RAID / RAID I 20:12:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:12:55 CDB: 12 00 00 00 60 00 I 20:12:55 CDB Interpretation: Inquiry I 20:15:35 BUFFER: 05 80 00 32 5B 00 00 00 41 54 41 50 49 20 20 20 44 56 44 20 41 20 20 44 48 32 30 41 34 50 20 20 39 50 35 39 32 30 30 38 2F 30 31 2F 31 34 20 31 38 3A 34 34 20 20 20 20 00 00 00 00 00 00 00 00 I 20:15:35 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:15:35 CDB: 5A 00 2A 00 00 00 00 00 FC 00 I 20:15:35 CDB Interpretation: Mode Sense (10) - Page Code (0x2A) - CD/DVD Capabilities and Mechanical Status ***EDIT*** Now this has been added to the log. I 20:15:35 CDB Interpretation: Mode Sense (10) - Page Code (0x2A) - CD/DVD Capabilities and Mechanical Status I 20:18:15 BUFFER: 00 4A 41 00 00 00 00 00 2A 42 3F 37 F5 73 29 23 40 EC 01 00 08 00 40 EC 00 10 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 03 00 00 2B 48 00 00 20 76 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 I 20:18:15 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:18:15 CDB: 46 02 01 08 00 00 00 00 F8 00 I 20:18:15 CDB Interpretation: Get Configuration - Drive Serial Number ***EDIT AGAIN*** The intro thing has finished and here is the rest of the log. However, it states "Device Not Ready" I 20:18:15 CDB Interpretation: Get Configuration - Drive Serial Number I 20:20:55 BUFFER: 00 00 00 1C 00 00 00 2B 01 08 03 14 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 00 03 00 00 00 00 10 00 I 20:20:55 CDB Interpretation: Get Configuration - Removable Medium I 20:20:55 BUFFER: 00 00 00 0C 00 00 00 2B 00 03 03 04 29 00 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 01 02 00 00 00 00 10 00 I 20:20:55 CDB Interpretation: Get Configuration - Embedded Changer I 20:20:55 BUFFER: 00 00 00 04 00 00 00 2B 00 00 00 00 00 00 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 01 07 00 00 00 00 10 00 I 20:20:55 CDB Interpretation: Get Configuration - Real Time Streaming I 20:20:55 BUFFER: 00 00 00 0C 00 00 00 2B 01 07 0D 04 1E 00 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 00 1D 00 00 00 00 0C 00 I 20:20:55 CDB Interpretation: Get Configuration - Multi-Read I 20:20:55 BUFFER: 00 00 00 08 00 00 00 2B 00 1D 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 00 1E 00 00 00 00 10 00 I 20:20:55 CDB Interpretation: Get Configuration - CD Read I 20:20:55 BUFFER: 00 00 00 0C 00 00 00 2B 00 1E 04 04 03 00 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 00 1F 00 00 00 00 10 00 I 20:20:55 CDB Interpretation: Get Configuration - DVD Read I 20:20:55 BUFFER: 00 00 00 0C 00 00 00 2B 00 1F 04 04 00 00 01 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 00 27 00 00 00 00 10 00 I 20:20:55 CDB Interpretation: Get Configuration - CD-RW CAV Write I 20:20:55 BUFFER: 00 00 00 0C 00 00 00 2B 00 27 00 04 00 00 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 00 2A 00 00 00 00 10 00 I 20:20:55 CDB Interpretation: Get Configuration - DVD+RW I 20:20:55 BUFFER: 00 00 00 0C 00 00 00 2B 00 2A 00 04 01 00 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 00 2B 00 00 00 00 10 00 I 20:20:55 CDB Interpretation: Get Configuration - DVD+R I 20:20:55 BUFFER: 00 00 00 0C 00 00 00 2B 00 2B 00 04 01 00 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 00 2D 00 00 00 00 10 00 I 20:20:55 CDB Interpretation: Get Configuration - CD Track at Once I 20:20:55 BUFFER: 00 00 00 0C 00 00 00 2B 00 2D 08 04 5F 00 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 00 2E 00 00 00 00 10 00 I 20:20:55 CDB Interpretation: Get Configuration - CD Mastering I 20:20:55 BUFFER: 00 00 00 0C 00 00 00 2B 00 2E 04 04 7F 00 0D 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 00 2F 00 00 00 00 10 00 I 20:20:55 CDB Interpretation: Get Configuration - DVD-R/-RW Write I 20:20:55 BUFFER: 00 00 00 0C 00 00 00 2B 00 2F 08 04 4E 00 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 00 33 00 00 00 00 F8 00 I 20:20:55 CDB Interpretation: Get Configuration - Layer Jump Recording I 20:20:55 BUFFER: 00 00 00 10 00 00 00 2B 00 33 00 08 00 00 00 01 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 00 3A 00 00 00 00 10 00 I 20:20:55 CDB Interpretation: Get Configuration - DVD+RW Dual Layer I 20:20:55 BUFFER: 00 00 00 04 00 00 00 2B 00 00 00 00 00 00 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 00 3B 00 00 00 00 10 00 I 20:20:55 CDB Interpretation: Get Configuration - DVD+R Dual Layer I 20:20:55 BUFFER: 00 00 00 0C 00 00 00 2B 00 3B 01 04 01 00 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 00 40 00 00 00 00 28 00 I 20:20:55 CDB Interpretation: Get Configuration - BD Read Feature I 20:20:55 BUFFER: 00 00 00 04 00 00 00 2B 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 00 41 00 00 00 00 20 00 I 20:20:55 CDB Interpretation: Get Configuration - BD Write Feature I 20:20:55 BUFFER: 00 00 00 04 00 00 00 2B 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 00 50 00 00 00 00 10 00 I 20:20:55 CDB Interpretation: Get Configuration - HD DVD Read I 20:20:55 BUFFER: 00 00 00 04 00 00 00 2B 00 00 00 00 00 00 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 00 51 00 00 00 00 10 00 I 20:20:55 CDB Interpretation: Get Configuration - HD DVD Write I 20:20:55 BUFFER: 00 00 00 04 00 00 00 2B 00 00 00 00 00 00 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 00 00 00 00 00 00 F8 00 I 20:20:55 CDB Interpretation: Get Configuration - Profile List I 20:20:55 BUFFER: 00 00 00 40 00 00 00 2B 00 00 03 38 00 2B 01 00 00 1B 00 00 00 1A 00 00 00 16 00 00 00 15 00 00 00 14 00 00 00 13 00 00 00 12 00 00 00 11 00 00 00 10 00 00 00 0A 00 00 00 09 00 00 00 08 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 5A 00 3F 00 00 00 00 08 00 00 I 20:20:55 CDB Interpretation: Mode Sense (10) - Page Code (0x3F) - All Mode Pages I 20:20:55 BUFFER: 01 1C 41 00 00 00 00 00 01 0A C0 30 00 00 00 00 00 00 00 00 05 32 40 05 08 00 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 46 02 FF 33 00 00 00 00 10 00 I 20:20:55 CDB Interpretation: Get Configuration - LightScribe I 20:20:55 BUFFER: 00 00 00 04 00 00 00 2B 00 00 00 00 00 00 00 00 I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: A4 00 00 00 00 00 00 00 00 08 08 00 I 20:20:55 CDB Interpretation: Report Key - RPC State I 20:20:55 BUFFER: 00 06 00 00 25 FF 01 00 I 20:20:55 -> Drive 1 - Info: ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 Found 1 DVD±RW/RAM! I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 00 00 00 00 00 00 I 20:20:55 CDB Interpretation: Test Unit Ready I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 00 00 00 00 00 00 I 20:20:55 CDB Interpretation: Test Unit Ready I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 00 00 00 00 00 00 I 20:20:55 CDB Interpretation: Test Unit Ready I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 00 00 00 00 00 00 I 20:20:55 CDB Interpretation: Test Unit Ready I 20:20:55 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:20:55 CDB: 00 00 00 00 00 00 I 20:20:55 CDB Interpretation: Test Unit Ready I 20:21:16 [4:4:0] ATAPI DVD A DH20A4P 9P59 (D:) (RAID) I 20:21:16 CDB: 00 00 00 00 00 00 I 20:21:16 CDB Interpretation: Test Unit Ready Edited April 8, 2011 by landontc Link to comment Share on other sites More sharing options...
landontc Posted April 8, 2011 Author Share Posted April 8, 2011 Nevermind. I found the exact driver for the Via controller that I was using and it's working again. Crazy that the controller only works with that one driver. Link to comment Share on other sites More sharing options...
zxspectrum Posted April 12, 2011 Share Posted April 12, 2011 Yeah...but i'm having the same problem and i don't know my last driver since i last used it last year when i installed w7/x64. the log is actually pretty small here As you can see in the log below...none of my samsung writers are usable.I want to mention that this happened suddenly at the exact time that one imgburn was finished writing and switching to verify... suddenly the other imgburn that was set to the other writer poped the error with CDB and then i noticed that the writer that just finished writing the disc stopped ...reported some error, dont remember exactly cause i dind't thought i will write this post.I only decided to write after search for the exact CDB code error and found this post. Personally i think it has something to do with intel raid drivers (Intel RST reported some error at the time that the writers became unusable) but i cannot tell for sure.So, if anyone can help with any ideea...would be great. Thanks This is the exact error: CDB: 12 00 00 00 60 00 Interpretation: Inquiry Paste Log I 02:46:14 ImgBurn Version 2.5.5.0 started! I 02:46:14 Microsoft Windows 7 Enterprise x64 Edition (6.1, Build 7601 : Service Pack 1) I 02:46:14 Total Physical Memory: 6.282.324 KB - Available: 3.977.020 KB I 02:46:14 Initialising SPTI... I 02:46:14 Searching for SCSI / ATAPI devices... I 02:46:14 -> Drive 1 - Info: DTSOFT BDROM 1.05 (F:) (Virtual) E 02:46:29 Device->Initialise() Failed! E 02:46:29 Device: [1:3:0] TSSTcorp CDDVDW SH-S223F SB03 (I:) (ATAPI) E 02:46:29 This drive will not be visible in the program. E 02:46:31 Device->Initialise() Failed! E 02:46:31 Device: [1:2:0] TSSTcorp CDDVDW SH-S223Q SB03 (H:) (ATAPI) E 02:46:31 This drive will not be visible in the program. I 02:46:31 Found 1 BD-ROM! Link to comment Share on other sites More sharing options...
ianymaty Posted April 13, 2011 Share Posted April 13, 2011 If you have problems, make your own thread don't hijack other's. The problem may seam similar but it's hard to follow the answers. Use this site to identify what drivers needs update. http://www.ma-config.com/ Link to comment Share on other sites More sharing options...
Recommended Posts