Jump to content

XDG3 Help Needed


hades6903

Recommended Posts

Ok so heres the deal:

 

I am trying to backup xgd3 xbox360 games. I haven't had this problem before and have done this for quite some time.

 

Switched from memorex to Verbatim

Cleaned the drive and the lens

Took a lot of the power off my computer so I do not have a lot of things hooked up drawing power.

 

I am still getting the, W 00:48:40 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB, error everytime.

 

Please help!

 

I 00:47:51 ImgBurn Version 2.5.6.0 started!

I 00:47:51 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)

I 00:47:51 Total Physical Memory: 3,143,832 KB - Available: 1,977,708 KB

I 00:47:51 Initialising SPTI...

I 00:47:51 Searching for SCSI / ATAPI devices...

I 00:47:51 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH22NP20 2.00-09 (F:) (ATA)

I 00:47:51 -> Drive 2 - Info: TSSTcorp DVD-ROM SH-D162D SB00 (E:) (ATA)

I 00:47:51 Found 1 DVD-ROM and 1 DVD±RW/RAM!

W 00:48:39 User accepted disc space warning and is attempting to truncate!

I 00:48:39 Operation Started!

I 00:48:39 Source File: I:\Xbox 360\Dark Souls.dvd

I 00:48:39 Source File Sectors: 4,267,015 (MODE1/2048)

I 00:48:39 Source File Size: 8,738,846,720 bytes

I 00:48:39 Source File Volume Identifier: DVD_ROM

I 00:48:39 Source File Volume Set Identifier: c4480000MS UDFBridge

I 00:48:39 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 00:48:39 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 00:48:39 Source File File System(s): ISO9660, UDF (1.50)

I 00:48:39 Destination Device: [0:1:0] HL-DT-ST DVD-RAM GH22NP20 2.00 (F:) (ATA)

I 00:48:39 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00)

I 00:48:39 Destination Media Supported Write Speeds: 4x

I 00:48:39 Destination Media Sectors: 4,173,824

I 00:48:39 Write Mode: DVD

I 00:48:39 Write Type: DAO

I 00:48:39 Write Speed: 2.4x

I 00:48:40 Link Size: Auto

I 00:48:40 Lock Volume: Yes

I 00:48:40 Test Mode: No

I 00:48:40 OPC: No

I 00:48:40 BURN-Proof: Enabled

W 00:48:40 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x)

W 00:48:40 The drive only supports writing these discs at 4x.

I 00:48:40 Book Type Setting: DVD-ROM

W 00:48:40 Optimal layer break position exceeds L0 capacity.

W 00:48:40 Optimal L0 Sectors: 2,133,520

W 00:48:40 Maximum L0 Sectors: 2,086,912

I 00:48:40 Optimal L0 Data Zone Capacity: 2,133,520

I 00:48:40 Optimal L0 Data Zone Method: Copied From Original Disc

W 00:48:40 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB

E 00:48:42 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB

E 00:48:42 Operation Failed! - Duration: 00:00:02

I 00:48:42 Average Write Rate: N/A - Maximum Write Rate: N/A

Link to comment
Share on other sites

Thanks, that is one of the ones that I had not read, but then I may be having a different problem. I have ignored the error a couple of times but then when the backup is done it just gives me a black screen and then goes back to the dashboard temporarily. Any ideas?

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.