Jump to content

Writing LeanIn stuck


-JT-

Recommended Posts

OS: Windows 7

Burner: I've tried 2 burners ( Brand new Lite-On ihas 224b)

Problem: When burning anything imgburn will be stuck at writing leadin and 0% device buffer

Log:I 20:38:49 ImgBurn Version 2.5.6.0 started!

I 20:38:49 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)

I 20:38:49 Total Physical Memory: 2,030,968 KB - Available: 1,557,048 KB

W 20:38:49 Drive G:\ (FAT32) does not support single files > 4 GB in size.

I 20:38:50 Initialising SPTI...

I 20:38:50 Searching for SCSI / ATAPI devices...

I 20:38:51 -> Drive 1 - Info: ATAPI iHAS224 B GL0A (D:) (ATA)

I 20:38:51 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (F:) (Unknown)

I 20:38:51 Found 1 DVD-ROM and 1 DVD±RW/RAM!

I 20:39:32 Operation Started!

I 20:39:32 Source File: C:\Users\Jake\Documents\My Downloads\B2TB-Halo.Combat.Evolved.Anniversary.XBOX360-COMPLEX\complex-halocombat.dvd

I 20:39:32 Source File Sectors: 4,267,015 (MODE1/2048)

I 20:39:32 Source File Size: 8,738,846,720 bytes

I 20:39:32 Source File Volume Identifier: DVD_ROM

I 20:39:32 Source File Volume Set Identifier: 8db24000MS UDFBridge

I 20:39:32 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 20:39:32 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 20:39:32 Source File File System(s): ISO9660, UDF (1.50)

I 20:39:32 Destination Device: [3:0:0] ATAPI iHAS224 B GL0A (D:) (ATA)

I 20:39:32 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00)

I 20:39:32 Destination Media Supported Write Speeds: 2.4x

I 20:39:32 Destination Media Sectors: 4,267,040

I 20:39:32 Write Mode: DVD

I 20:39:32 Write Type: DAO

I 20:39:32 Write Speed: 2.4x

I 20:39:32 Link Size: Auto

I 20:39:32 Lock Volume: Yes

I 20:39:32 Test Mode: No

I 20:39:32 OPC: No

I 20:39:32 BURN-Proof: Enabled

I 20:39:32 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)

I 20:39:32 Book Type Setting: DVD-ROM

I 20:39:32 Advanced Settings - Force HT: No, Online HT: Yes, OverSpeed: No, SmartBurn: Yes

I 20:39:32 Optimal L0 Data Zone Capacity: 2,133,520

I 20:39:32 Optimal L0 Data Zone Method: Copied From Original Disc

I 20:39:32 Set L0 Data Zone Capacity Succeeded!

I 20:39:33 Filling Buffer... (40 MB)

I 20:39:34 Writing LeadIn...

Link to comment
Share on other sites

Sure it was a not used disc you tried with? The sector amount looks odd.

 

I 20:39:32 Destination Media Sectors: 4,267,040

its a fresh new disk ill try another

 

edit: same results

Edited by -JT-
Link to comment
Share on other sites

Turn off OHT. Does it still do the same thing?

 

I saw better results from my drive by turning Overspeed on and setting the speed to 4x.

 

Can you also please post the family tree info. Just right click the drive selection box and you should see the option on the context menu. Close the prompt and copy + paste from the log window.

Link to comment
Share on other sites

I 07:36:03 Family Tree:

I 07:36:03 -> ACPI x86-based PC

I 07:36:03 -> Microsoft ACPI-Compliant System

I 07:36:03 -> PCI bus

I 07:36:03 -> Standard Dual Channel PCI IDE Controller (VEN_1002&DEV_4379 - ATI)

I 07:36:03 -> IDE Channel (ATA Channel 1)

I 07:36:03 -> CD-ROM Drive (ATAPI iHAS224 B ATA Device) (Channel 1, Target 0, Lun 0)

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.