Jump to content

How to close disc if disc already written


alex68md

Recommended Posts

They're the three commands you can send to a drive in order to make it finalise a disc. If they don't work then the drive can't close the disc.

 

Now you've done all 3, please go into Write mode and copy + paste all the disc info from the box on the right when that disc is in the drive.

Link to comment
Share on other sites

They're the three commands you can send to a drive in order to make it finalise a disc. If they don't work then the drive can't close the disc.

 

Now you've done all 3, please go into Write mode and copy + paste all the disc info from the box on the right when that disc is in the drive.

sorry for long answer (was not clear for me)

 

Optiarc DVD RW AD-7260S 1.03 (SATA)

Current Profile: CD-R

 

Disc Information:

Status: Incomplete

State of Last Session: Empty

Erasable: No

Sessions: 2

Sectors: 339 894

Size: 696 102 912 bytes

Time: 75:33:69 (MM:SS:FF)

Free Sectors: 8 553

Free Space: 17 516 544 bytes

Free Time: 01:56:03 (MM:SS:FF)

Next Writable Address: 351294

Supported Write Speeds: 8x; 16x; 24x; 32x; 40x; 48x

 

TOC Information:

Session 1... (LBA: 0 / 00:02:00)

-> Track 01 (Mode 1, LBA: 0 / 00:02:00)

-> LeadOut (LBA: 339894 / 75:33:69)

 

ATIP Information:

Disc ID: 97m22s67f

Manufacturer: Daxon

Start Time of LeadIn: 97m22s67f

Last Possible Start Time of LeadOut: 79m59s74f

 

Performance (Write Speed):

Descriptor 1...

-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00

-> EL: 359849 (0x00057DA9)

-> RS: 1 764 KB/s (10x) - WS: 1 411 KB/s (8x)

Descriptor 2...

-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00

-> EL: 359849 (0x00057DA9)

-> RS: 3 528 KB/s (20x) - WS: 2 822 KB/s (16x)

Descriptor 3...

-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00

-> EL: 359849 (0x00057DA9)

-> RS: 7 056 KB/s (40x) - WS: 4 234 KB/s (24x)

Descriptor 4...

-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00

-> EL: 359849 (0x00057DA9)

-> RS: 7 056 KB/s (40x) - WS: 5 645 KB/s (32x)

Descriptor 5...

-> B0: 0x03; B1: 0x00; B2: 0x00; B3: 0x00

-> EL: 359849 (0x00057DA9)

-> RS: 7 056 KB/s (40x) - WS: 7 056 KB/s (40x)

Descriptor 6...

-> B0: 0x03; B1: 0x00; B2: 0x00; B3: 0x00

-> EL: 359849 (0x00057DA9)

-> RS: 8 467 KB/s (48x) - WS: 8 467 KB/s (48x)

so? disc is not closed right? and imgburn cannot it close but nero can

Link to comment
Share on other sites

Correct, the disc isn't finalised. You've got an empty 2nd session open.

 

I don't really know how you'd close that. I don't think it's possible without actually writing some data to it.

 

I can't find an option in Nero to close/finalise anything AFTER the fact, you just have the option to close/finalise at burn time.

Link to comment
Share on other sites

LIGHTNING UK! in the nero this can be done very easy - make "continue session" but make only finalize (without writing some data) and burn it.

 

in the my data drom previous step - I have select write mode (as you said) and I guess imgburn by self have opened session2.

 

the result is imgburn cannot help me to close some disc\session. very sad :(

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.