Jump to content

Can't burn @ 4x or 6x with ImgBurn 2.5.6.0 / 2.5.7.0


violator99

Recommended Posts

My burner is the LG BH10LS30.

 

With ImgBurn 2.5.5.0 and earlier, I can burn no problem on blank Verbatim 6x Blu-rays.

 

With 2.5.6.0, I could never burn faster than 2x.

 

I decided to try with 2.5.7.0, and it's doing the same thing. 2x max, even if I chose to burn to 4x or 6x.

 

I downgraded to 2.5.5.0 and no problem.

 

Am I the only one with this problem?

 

Cheers!

Link to comment
Share on other sites

  • 1 month later...

OK I just bought a new burner, as I thought it would fix the problem... LG BH12LS38

 

I still can't burn @ 6x on Verbatim 6x Certified Media but at least it's doing 4x instead of 2x with my old burner.

 

Here's the log:

 

I 17:16:10 ImgBurn Version 2.5.7.0 started!

I 17:16:10 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)

I 17:16:10 Total Physical Memory: 6,216,800 KB - Available: 4,483,400 KB

W 17:16:10 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!

I 17:16:10 Initialising SPTI...

I 17:16:10 Searching for SCSI / ATAPI devices...

I 17:16:11 -> Drive 1 - Info: HL-DT-ST BD-RE BH12LS38 1.00-D3 (D:) (ATAPI)

I 17:16:11 -> Drive 2 - Info: ELBY CLONEDRIVE 1.4 (V:) (SCSI)

I 17:16:11 -> Drive 3 - Info: HL-DT-ST DVDRAM GE20LU10 FE06 (W:) (USB)

I 17:16:11 Found 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM and 1 BD-RE!

I 17:20:44 Operation Started!

I 17:20:44 Building Image Tree...

I 17:20:44 Calculating Totals...

I 17:20:44 Preparing Image...

I 17:20:45 Contents: 107 Files, 18 Folders

I 17:20:45 Content Type: BD Video

I 17:20:45 Data Type: MODE1/2048

I 17:20:45 File System(s): UDF (2.50)

I 17:20:45 Volume Label: CPE

I 17:20:45 Size: 22,912,616,252 bytes

I 17:20:45 Sectors: 11,187,865

I 17:20:45 Image Size: 22,914,138,112 bytes

I 17:20:45 Image Sectors: 11,188,544

I 17:20:46 Operation Successfully Completed! - Duration: 00:00:01

I 17:20:46 Operation Started!

I 17:20:46 Source File: -==/\/[bUILD IMAGE]\/\==-

I 17:20:46 Source File Sectors: 11,188,544 (MODE1/2048)

I 17:20:46 Source File Size: 22,914,138,112 bytes

I 17:20:46 Source File Volume Identifier: CPE

I 17:20:46 Source File Volume Set Identifier: 40AA8A9600AAB879

I 17:20:46 Source File Application Identifier: ImgBurn v2.5.7.0

I 17:20:46 Source File Implementation Identifier: ImgBurn

I 17:20:46 Source File File System(s): UDF (2.50)

I 17:20:46 Destination Device: [1:1:0] HL-DT-ST BD-RE BH12LS38 1.00 (D:) (ATAPI)

I 17:20:46 Destination Media Type: BD-R (Disc ID: VERBAT-IMe-000)

I 17:20:46 Destination Media Supported Write Speeds: 2x, 4x, 6x, 8x, 10x, 12x

I 17:20:46 Destination Media Sectors: 12,219,392

I 17:20:46 Write Mode: BD

I 17:20:46 Write Type: DAO

I 17:20:46 Write Speed: 6x

I 17:20:46 Hardware Defect Management Active: No

I 17:20:46 BD-R Verify Not Required: Yes

I 17:20:46 Link Size: Auto

I 17:20:46 Lock Volume: Yes

I 17:20:46 Test Mode: No

I 17:20:46 OPC: No

I 17:20:46 BURN-Proof: Enabled

I 17:20:46 Write Speed Successfully Set! - Effective: 26,973 KB/s (6x)

I 17:21:00 Filling Buffer... (40 MB)

I 17:21:01 Writing LeadIn...

I 17:21:02 Writing Session 1 of 1... (1 Track, LBA: 0 - 11188543)

I 17:21:02 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11188543)

I 17:41:44 Synchronising Cache...

I 17:41:48 Closing Track...

I 17:41:49 Finalising Disc...

I 17:42:01 Exporting Graph Data...

I 17:42:01 Graph Data File: C:\Users\Medellia\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH12LS38_1.00_THURSDAY-MAY-10-2012_17-20_VERBAT-IMe-000_6x.ibg

I 17:42:01 Export Successfully Completed!

I 17:42:01 Operation Successfully Completed! - Duration: 00:21:14

I 17:42:01 Average Write Rate: 18,031 KB/s (4.0x) - Maximum Write Rate: 26,991 KB/s (6.0x)

 

If you need more info, don't hesitate to ask.

 

Cheers!

Link to comment
Share on other sites

Hmmmmmmm I burned another disc and this time it was going @ 6x. Maybe my first burn with the new burner was one of those disc that won't burn to 6x, like it happens sometimes.

 

I'll burn some more tonight and let you know. Thanks for your fast answer, by the way!

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.