Jump to content

Panasonic Blu Ray Player won't play MKV files but plays fine on PC


jagmv47

Recommended Posts

Brought a new LG Blu Ray Burner model HL-DT-ST BD-RE BH12LS38 1.00-D2 to burn mkv files and I'm using TDK BD-Re 50 GB dual layer discs. It plays on my pc but doesn't play on my Panasonic DMR-BWT700GL, there are no files showing on the tv screen. I have burned Sony 25gb BD-RE using imgburn and that worked fine but it was a different burner, but because it was brought in 2006 it didn't work with 50gb discs so I brought this one.

What am I doing wrong here?

hd movies watched no 1.log

Link to comment
Share on other sites

According to Panasonic DMR-BWT700GL specifications it plays mkv files from DVD-R/ DVD-R DL.

 

Try using DVD media not BD media.

 

http://panasonic.com.au/Products/DVD+and+Blu-ray/Blu-ray+-+Players+and+Recorders/DMR-BWT700GL/Specification

 

Also there is a new firmware release for that drive. http://www.firmwarehq.com/LG/BH12LS38/files.html

Link to comment
Share on other sites

I applied the fireware and tried again to burn using the 50gb tdk bd-re disk but with no success on my blu ray player! It's just that I have brought 2 packs of these discs so I really need to use them, so is there any way I can use these discs using imgburn?

 

I 00:49:18 ImgBurn Version 2.5.7.0 started!

I 00:49:18 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)

I 00:49:18 Total Physical Memory: 12,580,920 KB - Available: 10,094,116 KB

I 00:49:18 Initialising SPTI...

I 00:49:18 Searching for SCSI / ATAPI devices...

I 00:49:19 -> Drive 1 - Info: HL-DT-ST BD-RE BH12LS38 1.01-D0 (E:) (ATA)

I 00:49:20 -> Drive 2 - Info: HL-DT-ST BD-RE GBW-H10N GL06-02 (F:) (ATA)

I 00:49:20 Found 2 BD-REs!

I 00:49:39 Project Successfully Loaded!

I 00:49:39 File Name: C:\Users\Leda\AppData\Roaming\ImgBurn\Project Files\HD MOVIES WATCHED NO 1.IBB

I 00:50:09 Operation Started!

I 00:50:09 Building Image Tree...

I 00:50:09 Calculating Totals...

I 00:50:09 Preparing Image...

I 00:50:09 Contents: 8 Files, 0 Folders

I 00:50:09 Content Type: Data

I 00:50:09 Data Type: MODE1/2048

I 00:50:09 File System(s): UDF (1.02)

I 00:50:09 Volume Label: HD MOVIES WATCHED NO 1

I 00:50:09 Size: 47,337,756,784 bytes

I 00:50:09 Sectors: 23,114,141

I 00:50:09 Image Size: 47,338,356,736 bytes

I 00:50:09 Image Sectors: 23,114,432

I 00:50:09 Operation Successfully Completed! - Duration: 00:00:00

I 00:51:31 Operation Started!

I 00:51:31 Building Image Tree...

I 00:51:31 Calculating Totals...

I 00:51:31 Preparing Image...

I 00:51:31 Contents: 8 Files, 0 Folders

I 00:51:31 Content Type: Data

I 00:51:31 Data Type: MODE1/2048

I 00:51:31 File System(s): UDF (1.02)

I 00:51:31 Volume Label: HD MOVIES WATCHED NO 1

I 00:51:31 Size: 47,337,756,784 bytes

I 00:51:31 Sectors: 23,114,141

I 00:51:31 Image Size: 47,338,356,736 bytes

I 00:51:31 Image Sectors: 23,114,432

I 00:51:40 Operation Successfully Completed! - Duration: 00:00:08

I 00:51:40 Operation Started!

I 00:51:40 Source File: -==/\/[bUILD IMAGE]\/\==-

I 00:51:40 Source File Sectors: 23,114,432 (MODE1/2048)

I 00:51:40 Source File Size: 47,338,356,736 bytes

I 00:51:40 Source File Volume Identifier: HD MOVIES WATCHED NO 1

I 00:51:40 Source File Volume Set Identifier: 40FD066F0160B2AA

I 00:51:40 Source File Application Identifier: ImgBurn v2.5.7.0

I 00:51:40 Source File Implementation Identifier: ImgBurn

I 00:51:40 Source File File System(s): UDF (1.02)

I 00:51:40 Destination Device: [6:0:0] HL-DT-ST BD-RE BH12LS38 1.01 (E:) (ATA)

I 00:51:40 Destination Media Type: BD-RE (Disc ID: TDKBLD-Wfa-000)

I 00:51:40 Destination Media Supported Write Speeds: 2x

I 00:51:40 Destination Media Sectors: 24,307,712

I 00:51:40 Write Mode: BD

I 00:51:40 Write Type: DAO

I 00:51:40 Write Speed: 2x

I 00:51:40 Hardware Defect Management Active: No

I 00:51:40 BD-RE FastWrite: No

I 00:51:40 Link Size: Auto

I 00:51:40 Lock Volume: Yes

I 00:51:40 Test Mode: No

I 00:51:40 OPC: No

I 00:51:40 BURN-Proof: Enabled

I 00:51:40 Write Speed Successfully Set! - Effective: 8,991 KB/s (2x)

I 00:51:41 Filling Buffer... (80 MB)

I 00:51:44 Writing LeadIn...

I 00:51:50 Writing Session 1 of 1... (1 Track, LBA: 0 - 23114431)

I 00:51:50 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 23114431)

I 00:51:50 Writing Layer 0... (LBA: 0 - 12219391)

I 02:37:47 Writing Layer 1... (LBA: 12219392 - 23114431)

I 04:06:13 Synchronising Cache...

I 04:06:14 Exporting Graph Data...

I 04:06:14 Graph Data File: C:\Users\Leda\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH12LS38_1.01_SUNDAY-29-JULY-2012_12-51_AM_TDKBLD-Wfa-000_2x.ibg

I 04:06:14 Export Successfully Completed!

I 04:06:14 Operation Successfully Completed! - Duration: 03:14:33

I 04:06:14 Average Write Rate: 3,964 KB/s (0.9x) - Maximum Write Rate: 4,854 KB/s (1.1x)

Link to comment
Share on other sites

According to Panasonic DMR-BWT700GL specifications it plays mkv files from DVD-R/ DVD-R DL.

 

Try using DVD media not BD media.

 

http://panasonic.com.au/Products/DVD and Blu-ray/Blu-ray - P...ers/DMR-BWT700GL/Specification

 

 

There firmware update was not a fix for your player not been able to play burned BD discs.

Link to comment
Share on other sites

Use those 50 GB discs to burn standard BD video files on them.

 

Get some DVD-R/ DVD-R DL to burn the mkv files, that should work in your player. It's a limitation of your player, you can't do more than that.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.