Jump to content

DVD double layer - Burned successfully but on re-inserting into drive, it shows empty disk ??


jrok01

Recommended Posts

i am trying to burn some game iso files and i have used both nero multimedia suite 10 and imgburn but so far no luck except once.Burn process completes successfully and ejects the dvd and then when i reinsert it shows no contents in the disk.I see 7.96 free of 7.96 gb..i.e no space has been used...also to mention i started burning disk with nero 10 and wasted two disks.then i switched to imgburn and i changed the book type to dvd + R DL media and below that under new settings - selected DVD - ROM..then i burned the disk and again the same thing it showed 7.96 free of 7.96 gb..Then i thought why not try to use it in my desktop which is very old.and surprisingly it is reading that disk.the game iso is working fine.so then i again tried in my laptop but is just not reading it.Thinking this might work i burned some more dvd's in my laptop and then went on to see if the work in my desktop( since even they didn't worked in my laptop after burning )...But this time unlike previously, the disks were not working in desktop.it would behave like it is still being read.It does not show anything on opening /MYCOMPUTER.The whole explorer would just hang.The only thing that still works isthe dvd that i burendd the first time with imgburn after trying out in nero 10.It workd in desktop and not in my laptop. the disk keeps spinning and i hear clicking sound but in this disk only ( the one that works in desktop), disk is unable to load..

 

my config..Laptop vaio e series 2011

tsstcorp cddvdw ts-l633f

i3,4gb,320hdd

 

desktop - assembled

SONY DVD RW DW Q-120A

1gb,dual core,160gb hdd

(desktop is 8 yrs old)

 

log files from nero attached...also to mention i removed and reinstalled nero.i removed virtual clone drive and then tried nero alone.i removed nero + virtual clone drive and tried imgburn alone.rebooted several times but no luck :(

 

 

i have wasted 5 disks so far and the r very costly.i have 13 left and i seriously dont want to waste even 1 more disk.i have lot games to burn my laptop full of hdd sapce...pls help me in this ..

Log.txt

Log1.txt

Log.3txt.txt

Edited by jrok01
Link to comment
Share on other sites

i dont know how to capture log from imgburn..i thought maybe nero logs could give u some info.As i haven't been able to burn any working disks with imgburn either..i tried cleaning the drive with qtip and lcd cleaning solution.i can read/write dvd's cds all sort of stuff..its just thr double layer disks that r not working

Link to comment
Share on other sites

in the 6th last line it shows an error....but still this is the only dvd which is perfectly running in my desktop but not in my laptop.

 

; //****************************************\\

; ImgBurn Version 2.5.7.0 - Log

; Tuesday, 04 September 2012, 17:37:03

; \\****************************************//

;

;

I 16:40:29 ImgBurn Version 2.5.7.0 started!

I 16:40:29 Microsoft Windows 7 Home Basic x64 Edition (6.1, Build 7601 : Service Pack 1)

I 16:40:29 Total Physical Memory: 4,175,728 KB - Available: 2,168,388 KB

I 16:40:29 Initialising SPTI...

I 16:40:29 Searching for SCSI / ATAPI devices...

I 16:40:30 -> Drive 1 - Info: TSSTcorp CDDVDW TS-L633F SN01 (D:) (ATAPI)

I 16:40:30 Found 1 DVD±RW/RAM!

I 16:49:58 Operation Started!

I 16:49:58 Source File: F:\games\Battlefield.3-RELOADED\DVD1.iso

I 16:49:58 Source File Sectors: 4,151,168 (MODE1/2048)

I 16:49:58 Source File Size: 8,501,592,064 bytes

I 16:49:58 Source File Volume Identifier: BF3_DISC1

I 16:49:58 Source File Volume Set Identifier: 3F57A9E1003F5761

I 16:49:58 Source File Application Identifier: IMGBURN V2.5.6.0 - THE ULTIMATE IMAGE BURNER!

I 16:49:58 Source File Implementation Identifier: ImgBurn

I 16:49:58 Source File File System(s): ISO9660, UDF (1.02)

I 16:49:58 Destination Device: [0:1:0] TSSTcorp CDDVDW TS-L633F SN01 (D:) (ATAPI)

I 16:49:58 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R12-00)

I 16:49:58 Destination Media Supported Write Speeds: 3x, 4x, 6x

I 16:49:58 Destination Media Sectors: 4,173,824

I 16:49:58 Write Mode: DVD

I 16:49:58 Write Type: DAO

I 16:49:58 Write Speed: 2.4x

I 16:49:58 DVD+R DL Reserve Track: No

I 16:49:58 Link Size: Auto

I 16:49:58 Lock Volume: Yes

I 16:49:58 Test Mode: No

I 16:49:58 OPC: No

I 16:49:58 BURN-Proof: Enabled

W 16:49:58 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 4,155 KB/s (3x)

W 16:49:58 The drive only supports writing these discs at 3x, 4x, 6x.

I 16:49:58 Book Type Setting: DVD-ROM

I 16:49:58 Optimal L0 Data Zone Capacity: 2,075,584

I 16:49:58 Optimal L0 Data Zone Method: ECC Block Boundary

I 16:50:40 Set L0 Data Zone Capacity Succeeded!

I 16:50:40 Filling Buffer... (80 MB)

I 16:50:42 Writing LeadIn...

I 16:51:16 Writing Session 1 of 1... (1 Track, LBA: 0 - 4151167)

I 16:51:16 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4151167)

I 16:51:16 Writing Layer 0... (LBA: 0 - 2075583)

I 17:08:28 Writing Layer 1... (LBA: 2075584 - 4151167)

I 17:25:35 Synchronising Cache...

I 17:25:39 Closing Track...

I 17:25:40 Finalising Disc...

I 17:26:26 Exporting Graph Data...

I 17:26:26 Graph Data File: C:\Users\Vaio\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_TS-L633F_SN01_04-SEPTEMBER-2012_16-49_MBIPG101-R12-00_2.4x.ibg

I 17:26:26 Export Successfully Completed!

I 17:26:26 Operation Successfully Completed! - Duration: 00:36:28

I 17:26:26 Average Write Rate: 4,032 KB/s (2.9x) - Maximum Write Rate: 4,215 KB/s (3.0x)

I 17:26:26 Cycling Tray before Verify...

W 17:27:21 Waiting for device to become ready...

I 17:27:34 Device Ready!

E 17:27:34 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0)

E 17:27:34 Verify Failed! - Reason: Layouts do not match.

I 17:37:03 Close Request Acknowledged

I 17:37:03 Closing Down...

I 17:37:03 Shutting down SPTI...

I 17:37:03 ImgBurn closed!

;

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.