Jump to content

Writing LeadIn


KyleFYI

Recommended Posts

I 18:02:32 ImgBurn Version 2.5.7.0 started!

I 18:02:32 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)

I 18:02:32 Total Physical Memory: 6,196,404 KB - Available: 5,000,184 KB

I 18:02:32 Initialising SPTI...

I 18:02:32 Searching for SCSI / ATAPI devices...

I 18:02:32 -> Drive 1 - Info: PLDS DVDRWBD DS-6E2SH CD11 (D:) (ATAPI)

I 18:02:32 Found 1 BD-ROM/DVD±RW!

W 18:57:25 User accepted disc space warning and is attempting to truncate!

I 18:57:25 Operation Started!

I 18:57:25 Source File: C:\Users\Ku\Downloads\strange-codmw3\s-mw3.dvd

I 18:57:25 Source File Sectors: 4,267,015 (MODE1/2048)

I 18:57:25 Source File Size: 8,738,846,720 bytes

I 18:57:25 Source File Volume Identifier: DVD_ROM

I 18:57:25 Source File Volume Set Identifier: 67d90000MS UDFBridge

I 18:57:25 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 18:57:25 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 18:57:25 Source File File System(s): ISO9660, UDF (1.50)

I 18:57:25 Destination Device: [0:1:0] PLDS DVDRWBD DS-6E2SH CD11 (D:) (ATAPI)

I 18:57:25 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)

I 18:57:25 Destination Media Supported Write Speeds: 2.4x, 4x

I 18:57:25 Destination Media Sectors: 4,173,824

I 18:57:25 Write Mode: DVD

I 18:57:25 Write Type: DAO

I 18:57:25 Write Speed: MAX

I 18:57:25 DVD+R DL Reserve Track: No

I 18:57:25 Link Size: Auto

I 18:57:25 Lock Volume: Yes

I 18:57:25 Test Mode: No

I 18:57:25 OPC: No

I 18:57:25 BURN-Proof: Enabled

I 18:57:27 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)

W 18:57:27 Optimal layer break position exceeds L0 capacity.

W 18:57:27 Optimal L0 Sectors: 2,133,520

W 18:57:27 Maximum L0 Sectors: 2,086,912

I 18:57:27 Optimal L0 Data Zone Capacity: 2,133,520

I 18:57:27 Optimal L0 Data Zone Method: Copied From Original Disc

W 18:57:27 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List

I 18:57:28 Filling Buffer... (80 MB)

I 18:57:29 Writing LeadIn...

W 19:03:28 Failed to Write Sectors 0 - 31 - Reason: The request could not be performed because of an I/O device error.

W 19:03:28 Retrying (1 of 20)...

W 19:03:28 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred

W 19:03:28 Retrying (2 of 20)...

W 19:03:39 Retry Failed - Reason: Power Calibration Area Is Full

W 19:03:39 Retrying (3 of 20)...

W 19:06:49 Retry Failed - Reason: The request could not be performed because of an I/O device error.

W 19:06:49 Retrying (4 of 20)...

W 19:06:49 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred

W 19:06:49 Retrying (5 of 20)...

W 19:07:00 Retry Failed - Reason: Power Calibration Area Is Full

W 19:07:00 Retrying (6 of 20)...

W 19:10:10 Retry Failed - Reason: The request could not be performed because of an I/O device error.

W 19:10:10 Retrying (7 of 20)...

W 19:10:10 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred

W 19:10:10 Retrying (8 of 20)...

W 19:10:20 Retry Failed - Reason: Power Calibration Area Is Full

W 19:10:20 Retrying (9 of 20)...

W 19:13:30 Retry Failed - Reason: The request could not be performed because of an I/O device error.

W 19:13:30 Retrying (10 of 20)...

W 19:13:30 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred

W 19:13:30 Retrying (11 of 20)...

W 19:13:41 Retry Failed - Reason: Power Calibration Area Is Full

W 19:13:41 Retrying (12 of 20)...

W 19:16:51 Retry Failed - Reason: The request could not be performed because of an I/O device error.

W 19:16:51 Retrying (13 of 20)...

W 19:16:51 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred

W 19:16:51 Retrying (14 of 20)...

W 19:17:02 Retry Failed - Reason: Power Calibration Area Is Full

W 19:17:02 Retrying (15 of 20)...

W 19:20:12 Retry Failed - Reason: The request could not be performed because of an I/O device error.

W 19:20:12 Retrying (16 of 20)...

W 19:20:13 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred

W 19:20:13 Retrying (17 of 20)...

W 19:20:23 Retry Failed - Reason: Power Calibration Area Is Full

W 19:20:23 Retrying (18 of 20)...

W 19:23:33 Retry Failed - Reason: The request could not be performed because of an I/O device error.

W 19:23:33 Retrying (19 of 20)...

W 19:23:33 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred

W 19:23:33 Retrying (20 of 20)...

W 19:23:44 Retry Failed - Reason: Power Calibration Area Is Full

E 19:26:59 Failed to Write Sectors 0 - 31 - Reason: The request could not be performed because of an I/O device error.

I 19:26:59 Synchronising Cache...

W 19:27:02 User opted to skip the 'Close Track/Session/Disc' functions.

E 19:27:02 Failed to Write Image!

E 19:27:02 Operation Failed! - Duration: 00:29:36

I 19:27:02 Average Write Rate: N/A - Maximum Write Rate: N/A

 

 

 

I've updated my drivers on my burnner, and nothing....

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.