RymesWithGrape Posted February 15, 2013 Share Posted February 15, 2013 (edited) Hello everyone. I was just wondering what you can tell me about an xgd3 game that gets 300 PI and 30 PIF in disc speed. Imgburn settings all default All eeprom settings on Clear opc every burn (I have to get a good burn) MMKM-003@ 4x I was getting a few good burns and then it just went to sh*t And the bad spikes are always around the layerbreak (No suprise there) Thank you Log: ; //****************************************\\; ImgBurn Version 2.5.7.0 - Log; Friday, 15 February 2013, 19:56:12; \\****************************************//;;I 19:17:02 ImgBurn Version 2.5.7.0 started!I 19:17:02 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600)I 19:17:02 Total Physical Memory: 4,193,528 KB - Available: 3,223,552 KBI 19:17:03 Initialising SPTI...I 19:17:03 Searching for SCSI / ATAPI devices...I 19:17:03 -> Drive 1 - Info: ASUS DRW-24B5ST 1.00 (E:) (ATA)I 19:17:03 Found 1 DVD±RW/RAM!I 19:17:47 Operation Started!I 19:17:47 Source File: C:\Xbox 360 games\Assassins creed revelations\Assassins creed revelations.dvdI 19:17:47 Source File Sectors: 4,267,015 (MODE1/2048)I 19:17:47 Source File Size: 8,738,846,720 bytesI 19:17:47 Source File Volume Identifier: DVD_ROMI 19:17:47 Source File Volume Set Identifier: 8db24000MS UDFBridgeI 19:17:47 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)I 19:17:47 Source File Implementation Identifier: Microsoft CDIMAGE UDFI 19:17:47 Source File File System(s): ISO9660, UDF (1.50)I 19:17:47 Destination Device: [3:0:0] ASUS DRW-24B5ST 1.00 (E:) (ATA)I 19:17:47 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)I 19:17:47 Destination Media Supported Write Speeds: 4x, 6x, 8x, 12x, 16xI 19:17:47 Destination Media Sectors: 4,267,040I 19:17:47 Write Mode: DVDI 19:17:47 Write Type: DAOI 19:17:47 Write Speed: 4xI 19:17:47 DVD+R DL Reserve Track: NoI 19:17:47 Link Size: AutoI 19:17:47 Lock Volume: YesI 19:17:47 Test Mode: NoI 19:17:47 OPC: NoI 19:17:47 BURN-Proof: EnabledI 19:17:47 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)I 19:17:48 Optimal L0 Data Zone Capacity: 2,133,520I 19:17:48 Optimal L0 Data Zone Method: Copied From Original DiscI 19:18:18 Set L0 Data Zone Capacity Succeeded!I 19:18:18 Filling Buffer... (80 MB)I 19:18:19 Writing LeadIn...I 19:18:21 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)I 19:18:21 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)I 19:18:21 Writing Layer 0... (LBA: 0 - 2133519)I 19:31:25 Writing Layer 1... (LBA: 2133520 - 4267014)I 19:44:48 Synchronising Cache...I 19:44:52 Closing Track...I 19:44:53 Finalising Disc...I 19:45:26 Exporting Graph Data...I 19:45:26 Graph Data File: C:\Users\Robert\AppData\Roaming\ImgBurn\Graph Data Files\ASUS_DRW-24B5ST_1.00_FRIDAY-15-FEBRUARY-2013_7-17_PM_MKM-003-00_4x.ibgI 19:45:26 Export Successfully Completed!I 19:45:26 Operation Successfully Completed! - Duration: 00:27:38I 19:45:26 Average Write Rate: 5,377 KB/s (3.9x) - Maximum Write Rate: 5,693 KB/s (4.1x)I 19:56:12 Close Request AcknowledgedI 19:56:12 Closing Down...I 19:56:12 Shutting down SPTI...I 19:56:12 ImgBurn closed! Edited February 15, 2013 by RymesWithGrape Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 15, 2013 Share Posted February 15, 2013 You should only need FHT and Smartburn enabled. You can leave everything else on default - oh and you only need to clear opc history before the first burn with those settings, leave it alone after that. If you're still having problems, it's probably your drive or the discs at fault. Link to comment Share on other sites More sharing options...
RymesWithGrape Posted February 15, 2013 Author Share Posted February 15, 2013 You should only need FHT and Smartburn enabled. You can leave everything else on default - oh and you only need to clear opc history before the first burn with those settings, leave it alone after that. If you're still having problems, it's probably your drive or the discs at fault. Ok i will try it with those settings FHT:YES SB:YES OS:NO OHT:NO Imgburn all default and clear the opc Will let you know how it goes. Thanks for the help Link to comment Share on other sites More sharing options...
RymesWithGrape Posted February 15, 2013 Author Share Posted February 15, 2013 Burnt with those settings= 243 PI 12PIF But this time disc speed says the first chunk of high pif is at 3.0 then 5.0 bad spindle? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 15, 2013 Share Posted February 15, 2013 It's impossible for me to say. Try another one (made in Singapore) and see if it's any different. If it isn't, try another drive. Link to comment Share on other sites More sharing options...
RymesWithGrape Posted February 15, 2013 Author Share Posted February 15, 2013 (edited) I changed the settings to SB:YES FHT:YES OHT:YES OS:NO Cleared opc data and got 160 pi and 2 pif Installed fine to hdd and playing online Thank you LUK Edited February 15, 2013 by RymesWithGrape Link to comment Share on other sites More sharing options...
Recommended Posts