Jump to content

HELP ME FOR F SAKE PLEASEEEEEEEEEEEee


Keremenke98

Recommended Posts

Alright.
I've officialy tried EVERYTHING.
I"VE TRIED DIFFERENT DISCs, DIFFERENT GAMES, DIFFETENT IMGBURN SETTINGS,DIFFERENT IMGBURN VERSIONS AND I WILL KILL MY SELF.
AFTER FAILING ALL THIS, I BOUGHT A NEW BURNER, THE BURNER THATS SUPPORTED BY BURNERMAX, AND STILL FAILED.


W 21:32:35 Failed to Read Sectors 2112448 - 2112479 - Reason: L-EC Uncorrectable Error
W 21:32:44 Failed to Read Sector 2112448 - Reason: L-EC Uncorrectable Error
W 21:34:05 Retrying (1)...
W 21:34:11 Retry Failed - Reason: L-EC Uncorrectable Error
W 21:34:14 Failed to Read Sector 2112448 - Reason: L-EC Uncorrectable Error
W 21:34:22 Failed to Read Sector 2112449 - Reason: L-EC Uncorrectable Error
W 21:34:35 Failed to Read Sector 2112450 - Reason: L-EC Uncorrectable Error
E 21:34:39 Failed to Read Sector 2112450 - Reason: L-EC Uncorrectable Error
E 21:34:39 Failed to Verify Sectors!

Here's the log.
I have no idea what to do anymore, Im so maad god damn it.I've spent tons of money on discs, and once my dad finds out that I bought a new burner, and killed my PC warranty ( I had over 1,5 years more) while switching the burners, and still failed, He will murder me too.
SO WHAT THE HELL. F U IMGBURN FOR SUCKING DONKEY BAWLLS AND F U ASUS FOR HAVING SHITY BURNERS.
NICE FOR SERBIA TO HAVE NO IHAS AND FCK THIS.


im deeply sorry, but im just too mad.
Help
Link to comment
Share on other sites

First of all, post a full log of the burn not just a section of it.

 

Secondly, knock off the profanity and caps.  We're all adults here and try to treat all who need help as adults.

 

Here's a full log

I 20:57:24 ImgBurn Version 2.5.7.0 started!
I 20:57:24 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 20:57:24 Total Physical Memory: 4,193,528 KB  -  Available: 2,532,184 KB
I 20:57:24 Initialising SPTI...
I 20:57:24 Searching for SCSI / ATAPI devices...
I 20:57:24 -> Drive 1 - Info: DTSOFT BDROM 1.05 (G:) (Virtual)
I 20:57:24 -> Drive 2 - Info: ASUS DRW-24B5ST 1.00 (F:) (ATA)
I 20:57:24 Found 1 DVD±RW/RAM and 1 BD-ROM!
I 20:58:09 Operation Started!
I 20:58:09 Source File: C:\Users\Nemke98\Desktop\DMC\complex-dmc.dvd
I 20:58:09 Source File Sectors: 4,267,015 (MODE1/2048)
I 20:58:09 Source File Size: 8,738,846,720 bytes
I 20:58:09 Source File Volume Identifier: DVD_ROM
I 20:58:09 Source File Volume Set Identifier: d2ee4000MS UDFBridge
I 20:58:09 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 20:58:09 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 20:58:09 Source File File System(s): ISO9660, UDF (1.50)
I 20:58:09 Destination Device: [3:0:0] ASUS DRW-24B5ST 1.00 (F:) (ATA)
I 20:58:10 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 20:58:10 Destination Media Supported Write Speeds: 4x, 6x, 8x
I 20:58:10 Destination Media Sectors: 4,267,040
I 20:58:10 Write Mode: DVD
I 20:58:10 Write Type: DAO
I 20:58:10 Write Speed: 2.4x
I 20:58:10 DVD+R DL Reserve Track: No
I 20:58:10 Link Size: Auto
I 20:58:10 Lock Volume: Yes
I 20:58:10 Test Mode: No
I 20:58:10 OPC: No
I 20:58:10 BURN-Proof: Enabled
W 20:58:10 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x)
W 20:58:10 The drive only supports writing these discs at 4x, 6x, 8x.
I 20:58:10 Optimal L0 Data Zone Capacity: 2,133,520
I 20:58:10 Optimal L0 Data Zone Method: Copied From Original Disc
I 20:58:54 Set L0 Data Zone Capacity Succeeded!
I 20:58:55 Filling Buffer... (40 MB)
I 20:58:55 Writing LeadIn...
I 20:58:57 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 20:58:57 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 20:58:57 Writing Layer 0... (LBA: 0 - 2133519)
I 21:11:58 Writing Layer 1... (LBA: 2133520 - 4267014)
I 21:25:12 Synchronising Cache...
I 21:25:18 Closing Track...
I 21:25:19 Finalising Disc...
I 21:25:53 Exporting Graph Data...
I 21:25:53 Graph Data File: C:\Users\Nemke98\AppData\Roaming\ImgBurn\Graph Data Files\ASUS_DRW-24B5ST_1.00_TUESDAY-MARCH-12-2013_8-58_PM_MKM-003-00_2.4x.ibg
I 21:25:53 Export Successfully Completed!
I 21:25:53 Operation Successfully Completed! - Duration: 00:27:43
I 21:25:53 Average Write Rate: 5,421 KB/s (3.9x) - Maximum Write Rate: 5,632 KB/s (4.1x)
I 21:25:53 Cycling Tray before Verify...
W 21:26:00 Waiting for device to become ready...
I 21:26:11 Device Ready!
I 21:26:12 Operation Started!
I 21:26:12 Source Device: [3:0:0] ASUS DRW-24B5ST 1.00 (F:) (ATA)
I 21:26:12 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00)
I 21:26:12 Source Media Supported Write Speeds: 4x, 6x, 8x
I 21:26:12 Image File: C:\Users\Nemke98\Desktop\DMC\complex-dmc.dvd
I 21:26:12 Image File Sectors: 4,267,015 (MODE1/2048)
I 21:26:12 Image File Size: 8,738,846,720 bytes
I 21:26:12 Image File Volume Identifier: DVD_ROM
I 21:26:12 Image File Volume Set Identifier: d2ee4000MS UDFBridge
I 21:26:12 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 21:26:12 Image File Implementation Identifier: Microsoft CDIMAGE UDF
I 21:26:12 Image File File System(s): ISO9660, UDF (1.50)
I 21:26:12 Read Speed (Data/Audio): MAX / MAX
I 21:26:13 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 21:26:13 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 21:26:13 Verifying Layer 0... (LBA: 0 - 2133519)
W 21:32:35 Failed to Read Sectors 2112448 - 2112479 - Reason: L-EC Uncorrectable Error
W 21:32:44 Failed to Read Sector 2112448 - Reason: L-EC Uncorrectable Error
W 21:34:05 Retrying (1)...
W 21:34:11 Retry Failed - Reason: L-EC Uncorrectable Error
W 21:34:14 Failed to Read Sector 2112448 - Reason: L-EC Uncorrectable Error
W 21:34:22 Failed to Read Sector 2112449 - Reason: L-EC Uncorrectable Error
W 21:34:35 Failed to Read Sector 2112450 - Reason: L-EC Uncorrectable Error
E 21:34:39 Failed to Read Sector 2112450 - Reason: L-EC Uncorrectable Error
E 21:34:39 Failed to Verify Sectors!
I 21:34:41 Exporting Graph Data...
I 21:34:41 Graph Data File: C:\Users\Nemke98\AppData\Roaming\ImgBurn\Graph Data Files\ASUS_DRW-24B5ST_1.00_TUESDAY-MARCH-12-2013_8-58_PM_MKM-003-00_2.4x.ibg
I 21:34:41 Export Successfully Completed!
E 21:34:41 Operation Failed! - Duration: 00:08:27
I 21:34:41 Average Verify Rate: 8,349 KB/s (6.0x) - Maximum Verify Rate: 16,424 KB/s (11.9x)
I 22:16:22 Close Request Acknowledged
I 22:16:22 Closing Down...
I 22:16:23 Shutting down SPTI...
I 22:16:23 ImgBurn closed!
;

 

 

I apologize, and I am, deeply ,sorry.

Thanks in advance

Link to comment
Share on other sites

Just enable 'Force HyperTuning' and perform a 'Clear OPC History' operation. Then try again.

 

Oh and you can't burn at 2.4x so don't even bother trying. Put it on 4x and forget about it.

 

I got Asus 24B5ST, its not crossflashed. Does that have to do something with it?

Link to comment
Share on other sites

yes, do what I said using the drive advanced settings screen - you want the LiteOn tab.

 

So after I crossflash my Asus burner, I should do this.

 

btw, I tried crossflashing but failed when I tried writting with Flash Utility.It gave an error and i had to exit.Burner couldnt eject for few hours then it continued working.

Link to comment
Share on other sites

Doesn't it just work without crossflashing?

 

i dont knooow.

I though that, with BurnerMax Payload I could use burners (supported by Payload) that arent Ihas to burn discs.Now I bought a supported burner and still get the same error.I dont know what to do anymore...

How to perform Clear OPC history?

 

I installed recently the EEPROM Utility and I did enable Force hyper tuning, 

Edited by Keremenke98
Link to comment
Share on other sites

The payload tool working and the drive being able to overburn nicely are 2 very different things. In my testing, they never seem to work unless the 'Force Hypertuning' option is available and enabled.

 

Click the 'Change Advanced Settings' little button/icon down the bottom right of the screen when you're in Write mode.

 

Switch to the LiteOn tab and everything I said earlier should become clear.

Link to comment
Share on other sites

The payload tool working and the drive being able to overburn nicely are 2 very different things. In my testing, they never seem to work unless the 'Force Hypertuning' option is available and enabled.

 

Click the 'Change Advanced Settings' little button/icon down the bottom right of the screen when you're in Write mode.

 

Switch to the LiteOn tab and everything I said earlier should become clear.

 

Im so confuseeeeed.

I do Change Advanced settings in Eeprom utility?

And how do I turn LiteOn tab ? 

Im sorry Im an idiot...

 

I cleared the OPC history, in options it just says Clear OPC history

Edited by Keremenke98
Link to comment
Share on other sites

You must be over thinking things.

 

Can you not find the 'Change Advanced Settings...' button down the bottom right of the the Write mode screen in ImgBurn?

 

Write mode is what you go into when you click the 'Write image file to disc' button on the 'Ez Mode Picker' startup screen.

 

Once you've clicked that button, the 'Advanced Settings' screen will pop up. It's pretty obvious where the LiteOn tab it, it's got 'Lite-On' written on it.

Link to comment
Share on other sites

You must be over thinking things.

 

Can you not find the 'Change Advanced Settings...' button down the bottom right of the the Write mode screen in ImgBurn?

 

Write mode is what you go into when you click the 'Write image file to disc' button on the 'Ez Mode Picker' startup screen.

 

Once you've clicked that button, the 'Advanced Settings' screen will pop up. It's pretty obvious where the LiteOn tab it, it's got 'Lite-On' written on it.

 

I found it.

I clicked Lite On , Force Hyper tuning. So thats it?

Link to comment
Share on other sites

Once you've enabled it and then done 'clear opc history' from the same 'advanced settings' screen, yes.

 

Alright so I go to that, go LiteOn, chose force hyper tuning and click ok. I go again, go LiteOn , chose Clear OPC history, ok and im done?

Link to comment
Share on other sites

You don't just click 'ok', no.

 

You select what you want to modify/do (i.e. 'Force HyperTuning' or 'Clear OPC History') and then you pick the correction option in the 'New Setting' drop down box. Then you click the 'Change' button.

 

You should get a 'Success' prompt after each of them.

 

When you've done both, that's when you click 'OK'.

Link to comment
Share on other sites

You don't just click 'ok', no.

 

You select what you want to modify/do (i.e. 'Force HyperTuning' or 'Clear OPC History') and then you pick the correction option in the 'New Setting' drop down box. Then you click the 'Change' button.

 

You should get a 'Success' prompt after each of them.

 

When you've done both, that's when you click 'OK'.

 

Alright I've done it.Im so scared to burn another disc....

Anything else in settings of imgburn or abgx or burnermax i should do or change?

Link to comment
Share on other sites

Nope, ImgBurn's default settings work just fine.

 

Well, having said that, you'll want to make sure you're burning at 4x.

 

Dude, if this works, you're the greatest man alive...I will be so thankful.

I'll try tommorow.

 

If I ran the game trhou Abgx like 50 times, with different settings, and its all green, does it mean that game works 100% (that the error cant be game related)

And after I did this, clean OPC and Hyper Tuning, when I exit Imgburn will it be remembered, or do I have to do it again everytime I run imgburn.

 

 

Link to comment
Share on other sites

They're drive settings and nothing to do with ImgBurn itself.

 

The drive should remember them internally.

 

I burnt the disc, it works now. Well it worked pass the 6th lvl, that was the problem before, but I  got error few missions later saying the disc is dirty, unreadable.Maybe the disc rly is dirty and I havent tried to play passed that lvl again.But thanks a lot!

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.