Jump to content
Sign in to follow this  
Damned

No video playback on layer break preview window

Recommended Posts

As the topic title states, I cannot get any video playback on the preview window when I go to see how my layer break will end up looking on the DVD. The Window just shows the very first part of the area of the DVD that it loads and just stays stuck there, although the audio will playback perfectly fine. 

 

I have not had this problem before and I changed nothing in IMGburn settings, so I don't know what to do here. The DVDs will be made fine, as I had this problem previously but thought it had to do with something else with some other DVDs I was burning, but now I know that is no longer the case.

 

Anyway, here is the log...

 

I 01:20:15 ImgBurn Version 2.5.7.0 started!
I 01:20:15 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
I 01:20:15 Total Physical Memory: 8,363,072 KB  -  Available: 6,769,292 KB
I 01:20:15 Initialising SPTI...
I 01:20:15 Searching for SCSI / ATAPI devices...
I 01:20:15 -> Drive 1 - Info: HP DVD Writer 1260t BH21 (D:) (SATA)
I 01:20:15 Found 1 DVD±RW/RAM!
I 01:20:44 Operation Started!
I 01:20:44 Building Image Tree...
I 01:20:45 Checking Directory Depth...
I 01:20:45 Calculating Totals...
I 01:20:45 Preparing Image...
I 01:22:56 Using Layer Break LBA: 1640352 -> 1651632 (VTS_01, PGC: 1, Chapter: 9, Cell: 9, Vob/Cell ID: 2/1, Time: 00:44:09, SPLIP: Yes)
I 01:22:56 Checking Path Length...
I 01:22:56 Contents: 13 Files, 2 Folders
I 01:22:56 Content Type: DVD Video
I 01:22:56 Data Type: MODE1/2048
I 01:22:56 File System(s): ISO9660, UDF (1.02)
I 01:22:56 Volume Label: [Not Configured]
I 01:22:56 IFO/BUP 32K Padding: Enabled
I 01:22:56 Region Code: 1, 2, 3, 4, 5, 6, 7, 8
I 01:22:56 TV System: NTSC
I 01:22:56 Size: 6,741,372,928 bytes
I 01:22:56 Sectors: 3,291,686
I 01:22:56 Image Size: 6,765,084,672 bytes
I 01:22:56 Image Sectors: 3,303,264
I 01:22:56 Operation Successfully Completed! - Duration: 00:02:11
I 01:23:04 Operation Started!
I 01:23:04 Building Image Tree...
I 01:23:22 Checking Directory Depth...
I 01:23:22 Calculating Totals...
I 01:23:22 Preparing Image...
E 01:28:18 Operation Aborted! - Duration: 00:05:14
I 01:28:20 Close Request Acknowledged
I 01:28:20 Closing Down...
I 01:28:20 Shutting down SPTI...
I 01:28:20 ImgBurn closed!

Share this post


Link to post
Share on other sites

The preview feature is its own application (and not created by me). Normally when it won't display the video properly, it's because overlays are being used and the OS/graphics drivers aren't really supported by the program. So check your settings in Tools -> Settings -> General -> Page 2 -> ImgBurnPreview Options.

 

Other than that, can you not manually move the progress slider and see different bits of the video... even if actual playback isn't working?

Share this post


Link to post
Share on other sites

Just checked and all of the options under that heading are unticked. Even if I do manually change the progress bar I cannot see different parts of the video. The only major change I can think of that I did before this happened was turning off the desktop compositor.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.