Xander606 Posted June 18, 2013 Share Posted June 18, 2013 (edited) Hello Imageburn community,I have just updated Imageburn to the latest version 2.5.8.0I am having some trouble with my new Sony Optriac Model AD-5280S plus.The problem is that the device buffer does not fill to 100%It only manages to reach 96%The drive is in ultra DMA 5, i have two other lite on ihas drive connected to the same pc.I have replaced the sata cable, also changed sata ports twice.Pc specs:Amd extreme 9 Mb (990Fx chipset)Amd FX-8350 Cpu16Gb ddr3 (Gskill) 7-7-7-21Windows 7-64bit (Home premium)700w PSUAlthough, all that is irrelevant, as only chipset,power,drive and Imageburn are really the only things that really relevant while burning. So i was Hoping, that i could get a bit of support here on imageburn support forums.I almost forgot to mention i did update the AD-5280S plus to the latest firmware, i believe is 1z8.Thank you for your time.Xander EDIT: I have let the drive complete the burn. The burn turned out great. I have scanned the disc with my ihas 224 drive using Kprobe. I am now determined to know what is the problem with the device buffer only filling to 96%? Edited June 18, 2013 by Xander606 Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 18, 2013 Share Posted June 18, 2013 It's just down to how the drive works internally and is nothing to worry about. Some sit on 50% all the time. Link to comment Share on other sites More sharing options...
Sigma Posted June 23, 2013 Share Posted June 23, 2013 I have the same drive with the same firmware and the device buffer only goes up to 96% for me too. Burns are very good quality though, so I've never worried about it. It was the same on 2.5.7.0 for me as well. Link to comment Share on other sites More sharing options...
Recommended Posts