Jump to content

Noob mom with a problem burning dvd's


omegatoad

Recommended Posts

I am newbie to burning dvd's and have been using DVD Flick successfully. And FYI I am a mom with very little knowledge of the "techie" side of this stuff lol.

I tried searching the forum but some of the suggestions do not seem to apply to my situation and honestly kind of confuses me.

I have Verbatim DVD+R DL discs (ones recommended in the forum here) and I'm trying to burn some videos (avi format) I have saved in my computer, both about 2 hours long, but only one per disc. I've done it several times with single layer format discs with no problem. I got the Verbatim ones and now I can't do anything

I got an error window popup that said:


 

Unable to find any cells that could be used for the layer break!

 

Now would be a good time to start crying, because technically, this is the end of the world.

Layer Break must be between sectors 2019776 and 2086912

Sector 2019776 falls within VTS_01 (Title) which starts at sector 346. Relative to the start of VTS_01 (Title) the layer break must be between sectors 2019430 and 2086566

Relative Sector 2019430 falls withing PGC 1, Cell 1, which starts at relative sector 0.

Relative to the start of Cell 1 try splitting between sectors 2019430 (3944.2MB) and 2086566 (4075.32MB).

 

Do you want to continue anyway? (Not recommended)


Of course I select no everytime.



Here is the IMGBURN_WRITE LOG:

 

 


I 20:20:55 ImgBurn Version 2.4.4.0 started!
I 20:20:55 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
I 20:20:55 Total Physical Memory: 6,167,136 KB  -  Available: 3,683,216 KB
I 20:20:55 Initialising SPTI...
I 20:20:55 Searching for SCSI / ATAPI devices...
I 20:20:55 Found 1 DVD±RW/RAM!
I 20:20:55 Operation Started!
I 20:20:55 Building Image Tree...
I 20:20:55 Checking Directory Depth...
I 20:20:55 Calculating Totals...
I 20:20:55 Preparing Image...
E 20:21:16 Unable to find any cells that could be used for the layer break!
E 20:21:16 The layer break must be between sectors 2019776 and 2086912.
E 20:21:16 Sector 2019776 falls within VTS_01 (Title), which starts at sector 346.
E 20:21:16 Relative to the start of VTS_01 (Title), the layer break must be between sectors 2019430 and 2086566.
E 20:21:16 Relative sector 2019430 falls within PGC 1, Cell 1, which starts at relative sector 0.
E 20:21:16 Relative to the start of Cell 1, try splitting between sectors 2019430 (3944.2 MB) and 2086566 (4075.32 MB).
E 20:21:16 Operation Failed! - Duration: 00:00:21
I 20:21:16 Close Request Acknowledged
I 20:21:16 Closing Down...
I 20:21:17 Shutting down SPTI...
I 20:21:17 ImgBurn closed!



I read the thread How to deal with 'The End of The World' problem but I'm not clear how to apply it to my situation. Or rather I'm not sure HOW to use it to fix my situation :P

 

I do have IMGBURN but I haven't tried using it since it doesn't work with avi.

Any advice would be greatly appreciated :)

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.