Jump to content

Verify problem


Lapitude

Recommended Posts

I have been using Imgburn for years with no problem but I have been getting failure on DVD+R iso burn. It is XP iso and I have copied it before with no problem.Try as I might same problem each time. I updated the firmware, replaced the 80wire ATA cable and also removed the slave CD. I tested it on NeroDiscSpeed no error

 

I 00:04:21 ImgBurn Version 2.5.8.0 started!
I 00:04:21 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)
I 00:04:21 Total Physical Memory: 2,095,856 KiB  -  Available: 1,629,664 KiB
I 00:04:21 Initialising SPTI...
I 00:04:21 Searching for SCSI / ATAPI devices...
I 00:04:22 -> Drive 1 - Info: _NEC DVD_RW ND-1300A 1.0B (F:) (ATA)
I 00:04:22 Found 1 DVD±RW!
I 00:04:59 Operation Started!
I 00:04:59 Source File: C:\Documents and Settings\Peter\My Documents\Software\OS\MS OS\XPNew\en_windows_xp_professional_with_service_pack_3_x86_cd_x14-80428.iso
I 00:04:59 Source File Sectors: 301,639 (MODE1/2048)
I 00:04:59 Source File Size: 617,756,672 bytes
I 00:04:59 Source File Volume Identifier: GRTMPFPP_EN
I 00:04:59 Source File Volume Set Identifier: GRTMPFPP_EN
I 00:04:59 Source File Application Identifier: CDIMAGE 2.52 (03/09/2004 TM)
I 00:04:59 Source File File System(s): ISO9660 (Bootable)
I 00:04:59 Destination Device: [3:0:0] _NEC DVD_RW ND-1300A 1.0B (F:) (ATA)
I 00:04:59 Destination Media Type: DVD+R
I 00:04:59 Destination Media Supported Write Speeds: 2.3x, 4x
I 00:04:59 Destination Media Sectors: 2,295,104
I 00:04:59 Write Mode: DVD
I 00:04:59 Write Type: DAO
I 00:04:59 Write Speed: 2x
I 00:04:59 DVD+R Reserve Track: No
I 00:04:59 Link Size: Auto
I 00:04:59 Lock Volume: Yes
I 00:04:59 Test Mode: No
I 00:04:59 OPC: No
I 00:04:59 BURN-Proof: Enabled
I 00:04:59 Write Speed Successfully Set! - Effective: 2,822 KB/s (2x)
I 00:04:59 Book Type Setting: N/A (Reason: Invalid Command Operation Code)
I 00:05:00 Filling Buffer... (40 MiB)
I 00:05:00 Writing LeadIn...
I 00:05:25 Writing Session 1 of 1... (1 Track, LBA: 0 - 301638)
I 00:05:25 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 301638)
I 00:08:23 Synchronising Cache...
I 00:08:25 Closing Track...
I 00:08:31 Finalising Disc...
I 00:09:06 Exporting Graph Data...
I 00:09:06 Graph Data File: C:\Documents and Settings\Peter\Application Data\ImgBurn\Graph Data Files\_NEC_DVD_RW_ND-1300A_1.0B_19-MARCH-2014_00-04_N-A_2x.ibg
I 00:09:06 Export Successfully Completed!
I 00:09:06 Operation Successfully Completed! - Duration: 00:04:06
I 00:09:06 Average Write Rate: 3,389 KiB/s (2.5x) - Maximum Write Rate: 4,358 KiB/s (3.2x)
I 00:09:06 Cycling Tray before Verify...
W 00:09:13 Waiting for device to become ready...
I 00:09:30 Device Ready!
E 00:09:30 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0)
E 00:09:30 Verify Failed! - Reason: Layouts do not match.
 
Here is the disc info 
 
_NEC DVD_RW ND-1300A 1.0B (ATA)
Current Profile: DVD+R
 
Disc Information:
Status: Empty
State of Last Session: Empty
Erasable: No
Free Sectors: 2,295,104
Free Space: 4,700,372,992 bytes
Free Time: 510:03:29 (MM:SS:FF)
Next Writable Address: 0
Supported Write Speeds: 2.3x, 4x
 
Performance (Write Speed):
Descriptor 1...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295104 (0x00230540)
-> RS: 10,816 KB/s (8x) - WS: 3,245 KB/s (2.3x)
Descriptor 2...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295104 (0x00230540)
-> RS: 10,816 KB/s (8x) - WS: 5,408 KB/s (4x)
 
I tried different media (maxell), reduced the write speed form AWS to 4x to 2x  and also took the cover off and gently cleaned the lens with alcohol and a Q-Tip
 
Is this a drive failure? It is a very old writer, suppose I better change to Win8 - but what I've seen of it really don't like the interface though (seems to be touch screen orientated) and I'm getting to that age where I don't like change - Bah Humbug!
 

 

 

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.