Jump to content

LG GSA-H22N


Grain

Recommended Posts

I 18:16:21 ImgBurn Version 2.1.0.0 started!

I 18:16:21 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 18:16:21 Initialising SPTI...

I 18:16:21 Searching for SCSI / ATAPI devices...

I 18:16:22 Found 2 DVD?RWs and 2 DVD?RW/RAMs!

I 18:17:43 Operation Started!

I 18:17:43 Source File: -==/\/[DISCOVERY IMAGE]\/\==-

I 18:17:43 Source File Sectors: 2,297,888 (MODE1/2048)

I 18:17:43 Source File Size: 4,706,074,624 bytes

I 18:17:43 Source File Volume Identifier: DISCOVERY_IMAGE

I 18:17:43 Source File File System(s): None

I 18:17:43 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H22N 1.00 (F:) (ATA)

I 18:17:43 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 4x, 8x, 12x, 16x, 18x)

I 18:17:43 Destination Media Sectors: 2,297,888

I 18:17:43 Write Mode: DVD

I 18:17:43 Write Type: DAO

I 18:17:43 Write Speed: MAX

I 18:17:43 Link Size: Auto

I 18:17:43 Test Mode: No

I 18:17:43 BURN-Proof: Enabled

I 18:17:43 Filling Buffer...

I 18:17:44 Writing LeadIn...

I 18:18:01 Writing Image...

I 18:22:28 Synchronising Cache...

I 18:22:46 Exporting Graph Data...

I 18:22:46 Graph Data File: C:\DVDInfoPro Scans\HL-DT-ST_DVD-RAM_GSA-H22N_1.00_9-29-2006_MCC_03RG20_MAX_DISCOVERY_IMAGE.ibg

I 18:22:46 Export Successfully Completed!

I 18:22:46 Operation Successfully Completed! - Duration: 00:05:03

I 18:22:46 Average Write Rate: 17,277 KB/s (12.5x) - Maximum Write Rate: 25,179 KB/s (18.2x)

I 18:22:46 Cycling Tray before Verify...

W 18:22:57 Waiting for device to become ready...

I 18:23:17 Device Ready!

I 18:23:17 Operation Started!

I 18:23:17 Source Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H22N 1.00 (F:) (ATA)

I 18:23:17 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 03RG20) (Speeds: 4x, 8x, 12x, 16x, 18x)

I 18:23:17 Image File: -==/\/[DISCOVERY IMAGE]\/\==-

I 18:23:17 Image File Sectors: 2,297,888 (MODE1/2048)

I 18:23:17 Image File Size: 4,706,074,624 bytes

I 18:23:17 Image File Volume Identifier: DISCOVERY_IMAGE

I 18:23:17 Image File File System(s): None

I 18:23:18 Verifying Sectors...

I 18:28:27 Exporting Graph Data...

I 18:28:27 Graph Data File: C:\DVDInfoPro Scans\HL-DT-ST_DVD-RAM_GSA-H22N_1.00_9-29-2006_MCC_03RG20_MAX_DISCOVERY_IMAGE.ibg

I 18:28:27 Export Successfully Completed!

I 18:28:27 Operation Successfully Completed! - Duration: 00:05:02

I 18:28:27 Average Verify Rate: 15,217 KB/s (11.0x) - Maximum Verify Rate: 22,230 KB/s (16.1x)

247853.png

256163.png

 

I'm a little impressed so far, definitely the shortest personal burn time, but not quite breaking the 5 min barrier :lol: Next up are MCC-004-00, took 5:18, strangely enough I think it could be the book type setting that is making them take a little longer.

Link to comment
Share on other sites

Thanks Ken.

 

3cdef70e92.png

167e8a0197.png

 

I've decided this drives a keeper. Does a very nice job (IMO) on the media I use for personal archiving (Taiyo & Verb). Only "quirks" I've noticed so far is write speeds on crap media, ex those Fuji DL's (RITEK D01-01 dye) the only speed it will burn them at is 4X, no 2.4 (although strangely did a good job on them, will add it to the media section/Fujifilm DL's). Also picked up some Maxell 16X -R's for testing (RITEKF1 dye) and it will only zap them at 4X, once again not important to me.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.