isevs Posted January 3, 2015 Share Posted January 3, 2015 Hello, know anyone this Problem: After the formatting an Burning-Session the Verify has failed with the following text: "Layout doesn't match..." I have try it with TDK R+ and Medion + Rewrite. The Protokoll (i am using XP): --------------------------------- Optiarc DVD RW AD-7170A 1.04 (ATA) Current Profile: DVD+RW Disc Information: Status: Empty State of Last Session: Empty Erasable: Yes Formatted: No Free Sectors: 2.295.104 Free Space: 4.700.372.992 bytes Free Time: 510:03:29 (MM:SS:FF) Next Writable Address: 0 Supported Write Speeds: 2,4x; 4x Physical Format Information (ADIP): Disc ID: PHILIPS-041-00 Book Type: DVD+RW Part Version: 2 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 2.491.711 Last Physical Sector in Layer 0: 0 Physical Format Information (Last Recorded): Disc ID: PHILIPS-041-00 Book Type: DVD+RW Part Version: 2 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 2.491.711 Last Physical Sector in Layer 0: 0 Format Capacities: DT: 0x01 - NB: 2295104 (0x00230540) - TDP: 2048 FT: 0x26 - NB: 2295104 (0x00230540) - TDP: 0 Performance (Write Speed): Descriptor 1... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 2295104 (0x00230540) -> RS: 6.925 KB/s (5x) - WS: 3.324 KB/s (2,4x) Descriptor 2... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 2295104 (0x00230540) -> RS: 6.925 KB/s (5x) - WS: 5.540 KB/s (4x) --------------------------------- Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 4, 2015 Share Posted January 4, 2015 If it's still showing up as being totally empty after being formatted, your drive must have an issue with the disc. Check the drives firmware is up to date and perhaps give it a clean with a cleaning disc. Link to comment Share on other sites More sharing options...
isevs Posted January 4, 2015 Author Share Posted January 4, 2015 have I search for the Firmware-Version in the regedit? Or which is the shortest way to find it? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 4, 2015 Share Posted January 4, 2015 Right click the drive selection box in ImgBurn and select the option to check for firmware updates. Link to comment Share on other sites More sharing options...
Recommended Posts