Jump to content

BD not burning


skoville

Recommended Posts

Hi all,

  I'm trying to burn rar files to Memorex BD-R at 6 or 4x. DVDINFOPRO = RITEKBR3. I have imgburn set at UDF 2.50 and it completes stating successful. The disk is blank. Where am I going wrong?

 

I 19:33:42 ImgBurn Version 2.5.8.0 started!
I 19:33:42 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 19:33:42 Total Physical Memory: 33,448,460 KiB  -  Available: 30,579,504 KiB
I 19:33:42 Initialising SPTI...
I 19:33:42 Searching for SCSI / ATAPI devices...
I 19:33:42 -> Drive 1 - Info: ATAPI iHAS224   B GL0A (I:) (SATA)
I 19:33:43 -> Drive 2 - Info: ATAPI iHBS112   2 PL06 (G:) (SATA)
I 19:33:43 -> Drive 3 - Info: HL-DT-ST BD-RE  WH14NS40 1.03-A0 (H:) (SATA)
I 19:33:43 Found 1 DVD±RW/RAM, 1 BD-RE and 1 BD-RE XL!
I 19:38:23 Operation Started!
I 19:38:23 Building Image Tree...
E 19:38:27 User did not specify a volume label.
E 19:38:27 Operation Aborted! - Duration: 00:00:04
I 19:38:44 Operation Started!
I 19:38:44 Building Image Tree...
I 19:38:52 Calculating Totals...
I 19:38:52 Preparing Image...
I 19:38:52 Contents: 10 Files, 0 Folders
I 19:38:52 Content Type: Data
I 19:38:52 Data Type: MODE1/2048
I 19:38:52 File System(s): UDF (2.50)
I 19:38:52 Volume Label: To Burn
I 19:38:52 Size: 24,892,171,153 bytes
I 19:38:52 Sectors: 12,154,385
I 19:38:52 Image Size: 24,893,063,168 bytes
I 19:38:52 Image Sectors: 12,154,816
I 19:38:55 Operation Successfully Completed! - Duration: 00:00:10
I 19:38:55 Operation Started!
I 19:38:55 Source File: -==/\/[bUILD IMAGE]\/\==-
I 19:38:55 Source File Sectors: 12,154,816 (MODE1/2048)
I 19:38:55 Source File Size: 24,893,063,168 bytes
I 19:38:55 Source File Volume Identifier: To Burn
I 19:38:55 Source File Volume Set Identifier: 46F59CD600B97771
I 19:38:55 Source File Application Identifier: ImgBurn v2.5.8.0
I 19:38:55 Source File Implementation Identifier: ImgBurn
I 19:38:55 Source File File System(s): UDF (2.50)
I 19:38:55 Destination Device: [5:0:0] HL-DT-ST BD-RE  WH14NS40 1.03 (H:) (SATA)
I 19:38:55 Destination Media Type: BD-R (Disc ID: RITEK-BR3-000)
I 19:38:55 Destination Media Supported Write Speeds: 4x, 6x, 8x, 10x
I 19:38:55 Destination Media Sectors: 12,219,392
I 19:38:55 Write Mode: BD
I 19:38:55 Write Type: DAO
I 19:38:55 Write Speed: 4x
I 19:38:55 Hardware Defect Management Active: No
I 19:38:55 BD-R Verify Not Required: Yes
I 19:38:55 Link Size: Auto
I 19:38:55 Lock Volume: Yes
I 19:38:55 Test Mode: No
I 19:38:55 OPC: No
I 19:38:55 BURN-Proof: Enabled
I 19:38:55 Write Speed Successfully Set! - Effective: 17,984 KB/s (4x)
I 19:39:02 Filling Buffer... (80 MiB)
I 19:39:03 Writing LeadIn...
W 19:39:06 Failed to Write Sectors 0 - 31 - Reason: Write Error
W 19:39:06 Retrying (1 of 20)...
I 19:39:08 Writing LeadIn...
I 19:39:08 Writing Session 1 of 1... (1 Track, LBA: 0 - 12154815)
I 19:39:08 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 12154815)
I 20:02:23 Synchronising Cache...
I 20:02:26 Closing Track...
I 20:02:27 Finalising Disc...
I 20:02:52 Exporting Graph Data...
I 20:02:52 Graph Data File: C:\Users\MickeyFinn\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_WH14NS40_1.03_TUESDAY-JULY-21-2015_7-38_PM_RITEK-BR3-000_4x.ibg
I 20:02:52 Export Successfully Completed!
I 20:02:52 Operation Successfully Completed! - Duration: 00:23:46
I 20:02:52 Average Write Rate: 17,438 KiB/s (4.0x) - Maximum Write Rate: 17,690 KiB/s (4.0x)

 

Using LG HL-DT-ST BD-RE  WH14NS40

Any help?
Have tried several times, different disks, even INFOMER40. (Melody, yes, ha ha)

Edited by skoville
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.