Jump to content

Reserving Track indefinitely (even over 9 hours!) for some data? Burning Blu ray


pnag

Recommended Posts

Hi,

 

Using an LG GGW-H20L, same spindle I've burnt tonnes of other discs from (Verbatim BD-50s) - I've found there are two discs (BDMV and CERTIFICATE folders, not isos) that I simply can't seem to burn.

 

Everything starts as normal, but stays indefinitely on "Reserving Track" so even the logs are useless. If I manually reboot, the disc is empty and re-usable, but if I try again, both of these 'problem' discs simply won't burn.

 

Any ideas? Can post more info if required, but not sure what to post as the logs look fine!

Link to comment
Share on other sites

If you could copy + paste everything in the log window when it's at the point where the drive is meant to be reserving the track, it would help.

 

If others are working ok, I can only assume it's a size thing and you drive can't handle what's being asked of it and it isn't returning an error, it's just freezing (that could also be driver related).

Link to comment
Share on other sites

Here you go - 20 minutes later and still just sitting there - reserving track.

 

I 21:40:42 ImgBurn Version 2.5.8.0 started!
I 21:40:42 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1)
I 21:40:42 Total Physical Memory: 4,160,648 KiB  -  Available: 2,801,344 KiB
I 21:40:42 Initialising SPTI...
I 21:40:42 Searching for SCSI / ATAPI devices...
I 21:40:52 -> Drive 1 - Info: HL-DT-ST BD-RE  GGW-H20L YL07 (E:) (SATA)
I 21:40:52 Found 1 HD DVD-ROM/BD-RE!
I 21:40:55 Operation Started!
I 21:40:55 Building Image Tree...
I 21:40:56 Calculating Totals...
I 21:40:56 Preparing Image...
I 21:40:56 Contents: 918 Files, 18 Folders
I 21:40:56 Content Type: BD Video
I 21:40:56 Data Type: MODE1/2048
I 21:40:56 File System(s): UDF (2.50)
I 21:40:56 Volume Label: [Not Configured]
I 21:40:56 Size: 47,432,561,204 bytes
I 21:40:56 Sectors: 23,161,128
I 21:40:56 Image Size: 47,438,823,424 bytes
I 21:40:56 Image Sectors: 23,163,488
I 21:40:56 Operation Successfully Completed! - Duration: 00:00:00
I 21:41:12 Operation Started!
I 21:41:12 Building Image Tree...
I 21:41:12 Calculating Totals...
I 21:41:12 Preparing Image...
I 21:41:13 Contents: 918 Files, 18 Folders
I 21:41:13 Content Type: BD Video
I 21:41:13 Data Type: MODE1/2048
I 21:41:13 File System(s): UDF (2.50)
I 21:41:13 Volume Label: VIDEO
I 21:41:13 Size: 47,432,561,204 bytes
I 21:41:13 Sectors: 23,161,128
I 21:41:13 Image Size: 47,438,823,424 bytes
I 21:41:13 Image Sectors: 23,163,488
I 21:41:13 Operation Successfully Completed! - Duration: 00:00:00
I 21:41:15 Operation Started!
I 21:41:15 Building Image Tree...
I 21:41:15 Calculating Totals...
I 21:41:15 Preparing Image...
I 21:41:16 Contents: 918 Files, 18 Folders
I 21:41:16 Content Type: BD Video
I 21:41:16 Data Type: MODE1/2048
I 21:41:16 File System(s): UDF (2.50)
I 21:41:16 Volume Label: VIDEO
I 21:41:16 Size: 47,432,561,204 bytes
I 21:41:16 Sectors: 23,161,128
I 21:41:16 Image Size: 47,438,823,424 bytes
I 21:41:16 Image Sectors: 23,163,488
I 21:41:42 Operation Successfully Completed! - Duration: 00:00:26
I 21:41:42 Operation Started!
I 21:41:42 Source File: -==/\/[bUILD IMAGE]\/\==-
I 21:41:42 Source File Sectors: 23,163,488 (MODE1/2048)
I 21:41:42 Source File Size: 47,438,823,424 bytes
I 21:41:42 Source File Volume Identifier: VIDEO
I 21:41:42 Source File Volume Set Identifier: 4706AD2701616E48
I 21:41:42 Source File Application Identifier: ImgBurn v2.5.8.0
I 21:41:42 Source File Implementation Identifier: ImgBurn
I 21:41:42 Source File File System(s): UDF (2.50)
I 21:41:42 Destination Device: [4:0:0] HL-DT-ST BD-RE  GGW-H20L YL07 (E:) (SATA)
I 21:41:42 Destination Media Type: BD-R (Disc ID: MEI-T02-001)
I 21:41:42 Destination Media Supported Write Speeds: 2x, 4x
I 21:41:42 Destination Media Sectors: 24,438,784
I 21:41:42 Write Mode: BD
I 21:41:42 Write Type: DAO
I 21:41:42 Write Speed: MAX
I 21:41:42 Hardware Defect Management Active: No
I 21:41:42 BD-R Verify Not Required: Yes
I 21:41:42 Link Size: Auto
I 21:41:42 Lock Volume: Yes
I 21:41:42 Test Mode: No
I 21:41:42 OPC: No
I 21:41:42 BURN-Proof: Enabled
I 21:41:42 Write Speed Successfully Set! - Effective: 17,982 KB/s (4x)
 

Link to comment
Share on other sites

Nope, it's not the data.

 

The program is simply sending the 'reserve track' command to the drive with a value for the size to reserve (based on the amount it has to burn).

You're well within the limits where the size of the disc is concerned. Commands should either succeed or fail... never get 'stuck'.

Link to comment
Share on other sites

Ah I see! Just that everything else data wise/disc wise has worked, but not this one. Must have tried it over a dozen times now. I'll try it again when the new burner arrives and let you know?

 

By the way - thanks for an amazing piece of software, I don't use anything else and always recommend it - cheers!

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.