elfrench Posted October 31, 2005 Share Posted October 31, 2005 This is posible adding support for overburning image extra size. Show this thread in CDFreak. Overburning is posible with BenQ 1640 http://club.cdfreaks.com/showthread.php?t=146051 will be wonderful to be able ImgBurn for overburning Sorry for my bad inglish i am spanish Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 31, 2005 Share Posted October 31, 2005 Replied at cdfreaks. Link to comment Share on other sites More sharing options...
elfrench Posted October 31, 2005 Author Share Posted October 31, 2005 Replied at cdfreaks. Thank you. Link to comment Share on other sites More sharing options...
Adrianvdh Posted October 1, 2012 Share Posted October 1, 2012 What drives can you use for overburning DVD+R and is it possible to overburn a Bluray DL+R od a bluray QL+R discs Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 1, 2012 Share Posted October 1, 2012 Sorry, I don't have a list. Without modified firmware (to extend the size of each layer), I very much doubt any drive will overburn anything other than single layer discs. Link to comment Share on other sites More sharing options...
Adrianvdh Posted October 1, 2012 Share Posted October 1, 2012 So i can over burn with my cheap LG dvd drive to a DVD+R disc Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 1, 2012 Share Posted October 1, 2012 Maybe, you'd have to try it and see for yourself. Use Discovery mode. Link to comment Share on other sites More sharing options...
Adrianvdh Posted October 1, 2012 Share Posted October 1, 2012 (edited) Oh how to I get Discovery mode to overburn or does it do it automatically? Edited October 1, 2012 by Adrianvdh Link to comment Share on other sites More sharing options...
Adrianvdh Posted October 1, 2012 Share Posted October 1, 2012 Sorry I mean how much could i overburn on a MCC-004-00 disc Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 1, 2012 Share Posted October 1, 2012 There's only 1 option you *might* need to change - the 'DVD+R Reserve Track' one in the settings on the Write tab. If you configure Discovery mode to write more data than listed for 'Free Sectors' in the disc info text on the right, it'll either work or it'll error out. If it fails with 'DVD+R Reserve Track' disabled, try it on another new disc with it enabled. If it fails both ways, your drive can't do it. Of course failure comes at different levels. It writing to anything beyond the 'Free Sectors' value is a success. Where it gets up to beyond that point is the amount of overburn your drive can do on the media you're using. Different discs will allow for less/more overburning. Link to comment Share on other sites More sharing options...
Adrianvdh Posted October 1, 2012 Share Posted October 1, 2012 So could you tell me how overburning works in detail Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 1, 2012 Share Posted October 1, 2012 In what way?! It's a drive thing. Either they can overburn certain discs a bit or they can't. I don't make the rules with this stuff. Link to comment Share on other sites More sharing options...
Adrianvdh Posted October 1, 2012 Share Posted October 1, 2012 No like does overburing e.g. overlap on the edge of the last layer Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 1, 2012 Share Posted October 1, 2012 Discs burn from the inside (near where the hole is) to the outer edges of the disc. If you overburn a disc, you're just writing data closer to the edge. The edges are the least reliable part of a disc, hence why you wouldn't normally burn on those parts - or at least not outside of the disc's specifications. It's like having a fence 1m from the edge of a cliff to keep the public safe... but now you want to move the fence so it's only 10 cm away. What if the edge crumbles away and people fall off?! Link to comment Share on other sites More sharing options...
Adrianvdh Posted October 1, 2012 Share Posted October 1, 2012 Oh ok Link to comment Share on other sites More sharing options...
Adrianvdh Posted October 1, 2012 Share Posted October 1, 2012 So i tried overburning and it didnt work what settings and what size must i set the custom size!? I 22:02:30 ImgBurn Version 2.5.7.0 started! I 22:02:31 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 22:02:31 Total Physical Memory: 8 379 444 KB - Available: 6 313 000 KB I 22:02:31 Initialising SPTI... I 22:02:31 Searching for SCSI / ATAPI devices... I 22:02:31 -> Drive 1 - Info: DTSOFT BDROM 1.05 (T:) (Virtual) I 22:02:31 -> Drive 2 - Info: ATAPI iHAS324 B AL1B (K:) (ATA) I 22:02:32 -> Drive 3 - Info: HL-DT-ST BD-RE BH10LS30 1.01-A0 (E:) (ATA) I 22:02:32 Found 1 DVD±RW/RAM, 1 BD-ROM and 1 BD-RE! I 22:02:48 Operation Started! I 22:02:48 Source File: -==/\/[DISCOVERY IMAGE]\/\==- I 22:02:48 Source File Sectors: 2 295 104 (MODE1/2048) I 22:02:48 Source File Size: 4 700 372 992 bytes I 22:02:48 Source File Volume Identifier: IMGBURN_DISCOVERY_IMAGE I 22:02:48 Source File Volume Set Identifier: 2295104_SECTORS I 22:02:48 Source File Application Identifier: IMGBURN V2.5.7.0 - THE ULTIMATE IMAGE BURNER! I 22:02:48 Source File Implementation Identifier: ImgBurn v2.5.7.0 I 22:02:48 Source File File System(s): ISO9660 I 22:02:48 Destination Device: [2:1:0] ATAPI iHAS324 B AL1B (K:) (ATA) I 22:02:48 Destination Media Type: DVD+R (Disc ID: MCC-004-00) I 22:02:48 Destination Media Supported Write Speeds: 6x, 8x, 12x, 16x I 22:02:48 Destination Media Sectors: 2 295 104 I 22:02:48 Write Mode: DVD I 22:02:48 Write Type: DAO I 22:02:48 Write Speed: 4x I 22:02:48 DVD+R Reserve Track: No I 22:02:48 Link Size: Auto I 22:02:48 Lock Volume: Yes I 22:02:48 Test Mode: No I 22:02:48 OPC: Yes I 22:02:48 BURN-Proof: Enabled W 22:02:49 Write Speed Miscompare! - Wanted: 5 540 KB/s (4x), Got: 8 310 KB/s (6x) W 22:02:49 The drive only supports writing these discs at 6x, 8x, 12x, 16x. I 22:02:49 Book Type Setting: DVD-ROM I 22:02:49 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 22:03:23 Filling Buffer... (80 MB) I 22:03:24 Writing LeadIn... I 22:03:27 Writing Session 1 of 1... (1 Track, LBA: 0 - 2295103) I 22:03:27 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2295103) W 22:03:52 Device Arrival Detected! W 22:03:52 The device list will be refreshed at the next available opportunity. I 22:12:55 Synchronising Cache... I 22:12:59 Closing Track... I 22:13:00 Finalising Disc... I 22:13:14 Exporting Graph Data... I 22:13:14 Graph Data File: C:\Users\Adrian\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS324_B_AL1B_01-OCTOBER-2012_10-02_PM_MCC-004-00_4x.ibg I 22:13:14 Export Successfully Completed! I 22:13:14 Operation Successfully Completed! - Duration: 00:10:25 I 22:13:14 Average Write Rate: 8 081 KB/s (5.8x) - Maximum Write Rate: 8 377 KB/s (6.0x) I 22:13:14 Cycling Tray before Verify... W 22:13:23 Waiting for device to become ready... I 22:13:33 Device Ready! I 22:13:33 Operation Started! I 22:13:33 Source Device: [2:1:0] ATAPI iHAS324 B AL1B (K:) (ATA) I 22:13:33 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: MCC-004-00) I 22:13:33 Source Media Supported Write Speeds: 6x, 8x, 12x, 16x I 22:13:33 Image File: -==/\/[DISCOVERY IMAGE]\/\==- I 22:13:33 Image File Sectors: 2 295 104 (MODE1/2048) I 22:13:33 Image File Size: 4 700 372 992 bytes I 22:13:33 Image File Volume Identifier: IMGBURN_DISCOVERY_IMAGE I 22:13:33 Image File Volume Set Identifier: 2295104_SECTORS I 22:13:33 Image File Application Identifier: IMGBURN V2.5.7.0 - THE ULTIMATE IMAGE BURNER! I 22:13:33 Image File Implementation Identifier: ImgBurn v2.5.7.0 I 22:13:33 Image File File System(s): ISO9660 I 22:13:33 Read Speed (Data/Audio): MAX / MAX I 22:13:34 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2295103) I 22:13:34 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2295103) W 22:17:38 Device Arrival Detected! W 22:17:38 The device list will be refreshed at the next available opportunity. I 22:18:41 Exporting Graph Data... I 22:18:41 Graph Data File: C:\Users\Adrian\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS324_B_AL1B_01-OCTOBER-2012_10-02_PM_MCC-004-00_4x.ibg I 22:18:41 Export Successfully Completed! I 22:18:41 Operation Successfully Completed! - Duration: 00:05:07 I 22:18:41 Average Verify Rate: 15 000 KB/s (10.8x) - Maximum Verify Rate: 21 705 KB/s (15.7x) I 22:19:18 Searching for SCSI / ATAPI devices... I 22:19:18 -> Drive 1 - Info: DTSOFT BDROM 1.05 (T:) (Virtual) I 22:19:19 -> Drive 2 - Info: ATAPI iHAS324 B AL1B (K:) (ATA) I 22:19:19 -> Drive 3 - Info: HL-DT-ST BD-RE BH10LS30 1.01-A0 (E:) (ATA) I 22:19:19 -> Drive 4 - Info: PBDS VAD6038-64930C (R:) (USB) I 22:19:19 Found 1 DVD±RW/RAM, 1 BD-ROM, 1 BD-RE and 1 Unknown! W 22:29:44 User accepted disc space warning and is attempting to overburn! I 22:29:44 Operation Started! I 22:29:44 Source File: -==/\/[DISCOVERY IMAGE]\/\==- I 22:29:44 Source File Sectors: 2 560 000 (MODE1/2048) I 22:29:44 Source File Size: 5 242 880 000 bytes I 22:29:44 Source File Volume Identifier: IMGBURN_DISCOVERY_IMAGE I 22:29:44 Source File Volume Set Identifier: 2560000_SECTORS I 22:29:44 Source File Application Identifier: IMGBURN V2.5.7.0 - THE ULTIMATE IMAGE BURNER! I 22:29:44 Source File Implementation Identifier: ImgBurn v2.5.7.0 I 22:29:44 Source File File System(s): ISO9660 I 22:29:44 Destination Device: [2:1:0] ATAPI iHAS324 B AL1B (K:) (ATA) I 22:29:44 Destination Media Type: DVD+R (Disc ID: MCC-004-00) I 22:29:44 Destination Media Supported Write Speeds: 6x, 8x, 12x, 16x I 22:29:44 Destination Media Sectors: 2 295 104 I 22:29:44 Write Mode: DVD I 22:29:44 Write Type: DAO I 22:29:44 Write Speed: 4x I 22:29:44 DVD+R Reserve Track: No I 22:29:44 Link Size: Auto I 22:29:44 Lock Volume: Yes I 22:29:44 Test Mode: No I 22:29:44 OPC: Yes I 22:29:44 BURN-Proof: Enabled W 22:29:44 Write Speed Miscompare! - Wanted: 5 540 KB/s (4x), Got: 8 310 KB/s (6x) W 22:29:44 The drive only supports writing these discs at 6x, 8x, 12x, 16x. I 22:29:44 Book Type Setting: DVD-ROM I 22:29:44 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 22:30:14 Filling Buffer... (80 MB) I 22:30:14 Writing LeadIn... I 22:30:18 Writing Session 1 of 1... (1 Track, LBA: 0 - 2559999) I 22:30:18 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2559999) W 22:39:55 Failed to Write Sectors 2295104 - 2295135 - Reason: End of User Area Encountered on This Track W 22:39:55 Retrying (1 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range W 22:39:59 Retrying (2 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range W 22:39:59 Retrying (3 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range W 22:39:59 Retrying (4 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range W 22:39:59 Retrying (5 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range W 22:39:59 Retrying (6 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range W 22:39:59 Retrying (7 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range W 22:39:59 Retrying (8 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range W 22:39:59 Retrying (9 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range W 22:39:59 Retrying (10 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range W 22:39:59 Retrying (11 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range W 22:39:59 Retrying (12 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range W 22:39:59 Retrying (13 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range W 22:39:59 Retrying (14 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range W 22:39:59 Retrying (15 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range W 22:39:59 Retrying (16 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range W 22:39:59 Retrying (17 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range W 22:39:59 Retrying (18 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range W 22:39:59 Retrying (19 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range W 22:39:59 Retrying (20 of 20)... W 22:39:59 Retry Failed - Reason: Logical Block Address out of Range E 22:40:01 Failed to Write Sectors 2295104 - 2295135 - Reason: End of User Area Encountered on This Track I 22:40:01 Synchronising Cache... W 22:40:19 User opted to skip the 'Close Track/Session/Disc' functions. E 22:40:19 Failed to Write Image! I 22:40:19 Exporting Graph Data... I 22:40:19 Graph Data File: C:\Users\Adrian\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS324_B_AL1B_01-OCTOBER-2012_10-29_PM_MCC-004-00_4x.ibg I 22:40:19 Export Successfully Completed! E 22:40:19 Operation Failed! - Duration: 00:10:34 I 22:40:19 Average Write Rate: 7 873 KB/s (5.7x) - Maximum Write Rate: 8 377 KB/s (6.0x) Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 1, 2012 Share Posted October 1, 2012 ok and does it do the same with 'DVD+R Reserve Track' enabled in the settings? It doesn't matter what custom size you set just so long as it's beyond the value of 'Free Space'. Like I said before, you want to figure out if your drive can do it 'full stop' first. If it does let you overburn and the overburn amount (custom size) you've selected was successful, you just increase the custom size and try again until it errors out. Link to comment Share on other sites More sharing options...
Adrianvdh Posted October 1, 2012 Share Posted October 1, 2012 Yes it does but i havent tried the value thing Link to comment Share on other sites More sharing options...
Adrianvdh Posted October 1, 2012 Share Posted October 1, 2012 So to walk it through.. i have DVD+R Reserve Track enabled then I hit Free Space Icon and set it to the number of MB i want e.g. 4550 Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 1, 2012 Share Posted October 1, 2012 If you've already tired to burn 2 discs, one with 'DVD+R Reserve Track' enabled and another with it disabled and they've both failed at exactly this point... >> W 22:39:55 Failed to Write Sectors 2295104 - 2295135 - Reason: End of User Area Encountered on This Track ... give up, your drive doesn't support overburning. Link to comment Share on other sites More sharing options...
Adrianvdh Posted October 1, 2012 Share Posted October 1, 2012 But I have tried this with both me drives But what size can I set it in MB Link to comment Share on other sites More sharing options...
Adrianvdh Posted October 1, 2012 Share Posted October 1, 2012 Because My i Has 324 B does overburning dor DL DVDs and that works Link to comment Share on other sites More sharing options...
Adrianvdh Posted October 1, 2012 Share Posted October 1, 2012 (edited) Ok screw it I guess Ill just play around with it a bit more. Thanks for the chat I am pretty tired I am thinkng you are two because we have almost the same time zone and I have been on the PC all day,, Good Night Thanks for all you help and thanks for making the very awesome Program Sincere Adrianvdh! Edited October 1, 2012 by Adrianvdh Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 1, 2012 Share Posted October 1, 2012 That's via the 'Burner Max' firmware yeah? That's totally different. The firmware has been modified for that specific task... and it isn't really overburning because the firmware thinks that's just how much free space is on the disc. Link to comment Share on other sites More sharing options...
Adrianvdh Posted October 1, 2012 Share Posted October 1, 2012 Oh ok Bye!! Link to comment Share on other sites More sharing options...
Recommended Posts