Snipedinthehead Posted January 8, 2016 Share Posted January 8, 2016 Burning a copy of the Despecialized edition on a pretty-old (5-yearish) Lenovo Laptop. Have gotten up to about 46% burned prior to experiencing failure. I have used about 5 or 6 different Verbatim discs with various settings, but haven't gotten it to work. Looking for some help and advice on how to achieve success. I was able to do the entire series about 1 1/2 to 2 years ago, but haven't achieved success this time. Here is my latest error log: I 13:10:44 ImgBurn Version 2.5.8.0 started! I 13:10:44 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1, Safe Mode) I 13:10:44 Total Physical Memory: 6,203,568 KiB - Available: 5,469,948 KiB I 13:10:44 Initialising SPTI... I 13:10:44 Searching for SCSI / ATAPI devices... I 13:10:44 -> Drive 1 - Info: Slimtype DVD A DS8A5SH XL63 (F:) (ATAPI) I 13:10:44 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (E:) (Unknown) I 13:10:44 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 13:13:29 Operation Started! I 13:13:29 Source File: C:\Users\Jon and Riss\Downloads\SW_AVCHD v2.5\AVCHD v2.5.mds I 13:13:29 Source File Sectors: 4,142,848 (MODE1/2048) I 13:13:29 Source File Size: 8,484,552,704 bytes I 13:13:29 Source File Volume Identifier: SW v2.5 AVCHD I 13:13:29 Source File Volume Set Identifier: 44A4BA00003F3688 I 13:13:29 Source File Application Identifier: ImgBurn v2.5.8.0 I 13:13:29 Source File Implementation Identifier: ImgBurn I 13:13:29 Source File File System(s): UDF (2.50) I 13:13:29 Destination Device: [0:1:0] Slimtype DVD A DS8A5SH XL63 (F:) (ATAPI) I 13:13:29 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 13:13:29 Destination Media Supported Write Speeds: 3x, 4x, 6x I 13:13:29 Destination Media Sectors: 4,173,824 I 13:13:29 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes) I 13:13:29 Write Mode: DVD I 13:13:29 Write Type: DAO I 13:13:29 Write Speed: 3x I 13:13:29 DVD+R DL Reserve Track: No I 13:13:29 Link Size: Auto I 13:13:29 Lock Volume: Yes I 13:13:29 Test Mode: No I 13:13:29 OPC: No I 13:13:29 BURN-Proof: Enabled I 13:13:29 Write Speed Successfully Set! - Effective: 4,155 KB/s (3x) I 13:13:29 Book Type Setting: N/A (Reason: Invalid Field in CDB) I 13:13:29 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 13:13:29 Optimal L0 Data Zone Capacity: 2,071,424 I 13:13:29 Optimal L0 Data Zone Method: ECC Block Boundary W 13:14:22 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error E 13:14:43 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error E 13:14:43 Operation Failed! - Duration: 00:01:14 I 13:14:43 Average Write Rate: N/A - Maximum Write Rate: N/A I 13:14:48 Operation Started! I 13:14:48 Source File: C:\Users\Jon and Riss\Downloads\SW_AVCHD v2.5\AVCHD v2.5.mds I 13:14:48 Source File Sectors: 4,142,848 (MODE1/2048) I 13:14:48 Source File Size: 8,484,552,704 bytes I 13:14:48 Source File Volume Identifier: SW v2.5 AVCHD I 13:14:48 Source File Volume Set Identifier: 44A4BA00003F3688 I 13:14:48 Source File Application Identifier: ImgBurn v2.5.8.0 I 13:14:48 Source File Implementation Identifier: ImgBurn I 13:14:48 Source File File System(s): UDF (2.50) I 13:14:48 Destination Device: [0:1:0] Slimtype DVD A DS8A5SH XL63 (F:) (ATAPI) I 13:14:48 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 13:14:48 Destination Media Supported Write Speeds: 3x, 4x, 6x I 13:14:48 Destination Media Sectors: 4,142,848 I 13:14:48 Destination Media L0 Data Zone Capacity: 2,071,424 (Changeable: Yes) I 13:14:48 Write Mode: DVD I 13:14:48 Write Type: DAO I 13:14:48 Write Speed: 2.4x I 13:14:48 DVD+R DL Reserve Track: No I 13:14:48 Link Size: Auto I 13:14:48 Lock Volume: Yes I 13:14:48 Test Mode: No I 13:14:48 OPC: No I 13:14:48 BURN-Proof: Enabled W 13:14:48 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 4,155 KB/s (3x) W 13:14:48 The drive only supports writing these discs at 3x, 4x, 6x. I 13:14:48 Book Type Setting: N/A (Reason: Invalid Field in CDB) I 13:14:48 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 13:14:48 Optimal L0 Data Zone Capacity: 2,071,424 I 13:14:48 Optimal L0 Data Zone Method: ECC Block Boundary W 13:14:48 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error I 13:14:48 L0 Data Zone Capacity - Effective: 2,071,424 I 13:14:48 Filling Buffer... (80 MiB) I 13:14:48 Writing LeadIn... W 13:14:49 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error W 13:14:49 Retrying (1 of 20)... W 13:14:49 Retry Failed - Reason: Power Calibration Area Error W 13:14:49 Retrying (2 of 20)... W 13:14:49 Retry Failed - Reason: Power Calibration Area Error W 13:14:49 Retrying (3 of 20)... W 13:14:49 Retry Failed - Reason: Power Calibration Area Error W 13:14:49 Retrying (4 of 20)... W 13:14:50 Retry Failed - Reason: Power Calibration Area Error W 13:14:50 Retrying (5 of 20)... W 13:14:50 Retry Failed - Reason: Power Calibration Area Error W 13:14:50 Retrying (6 of 20)... W 13:14:51 Retry Failed - Reason: Power Calibration Area Error W 13:14:51 Retrying (7 of 20)... W 13:14:51 Retry Failed - Reason: Power Calibration Area Error W 13:14:51 Retrying (8 of 20)... W 13:14:52 Retry Failed - Reason: Power Calibration Area Error W 13:14:52 Retrying (9 of 20)... W 13:14:52 Retry Failed - Reason: Power Calibration Area Error W 13:14:52 Retrying (10 of 20)... W 13:14:53 Retry Failed - Reason: Power Calibration Area Error W 13:14:53 Retrying (11 of 20)... W 13:14:53 Retry Failed - Reason: Power Calibration Area Error W 13:14:53 Retrying (12 of 20)... W 13:14:54 Retry Failed - Reason: Power Calibration Area Error W 13:14:54 Retrying (13 of 20)... W 13:14:54 Retry Failed - Reason: Power Calibration Area Error W 13:14:54 Retrying (14 of 20)... W 13:14:55 Retry Failed - Reason: Power Calibration Area Error W 13:14:55 Retrying (15 of 20)... W 13:14:56 Retry Failed - Reason: Power Calibration Area Error W 13:14:56 Retrying (16 of 20)... W 13:14:56 Retry Failed - Reason: Power Calibration Area Error W 13:14:56 Retrying (17 of 20)... W 13:14:57 Retry Failed - Reason: Power Calibration Area Error W 13:14:57 Retrying (18 of 20)... W 13:14:57 Retry Failed - Reason: Power Calibration Area Error W 13:14:57 Retrying (19 of 20)... W 13:14:58 Retry Failed - Reason: Power Calibration Area Error W 13:14:58 Retrying (20 of 20)... W 13:14:58 Retry Failed - Reason: Power Calibration Area Error Link to comment Share on other sites More sharing options...
ianymaty Posted January 13, 2016 Share Posted January 13, 2016 Try clean the laser with a cotton bud with alcohol or give it a good blow. If nothing works it seams your drive is probably get worned out. Laptop and slim drives aren't so reliable as the full hight ones. Link to comment Share on other sites More sharing options...
Recommended Posts