Jump to content

HELP! ERROR CODE...


KGOULD

Recommended Posts

I have had the worst problems trying to burn a dvd... please tell me what i'm doing wrong. here is  my log.

 

I 13:36:02 ImgBurn Version 2.5.8.0 started!

I 13:36:02 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200)
I 13:36:02 Total Physical Memory: 6,221,656 KiB  -  Available: 2,836,680 KiB
I 13:36:02 Initialising SPTI...
I 13:36:02 Searching for SCSI / ATAPI devices...
I 13:36:03 -> Drive 1 - Info: hp DVDRW  UJ8G2A SGM1 (E:) (SATA)
I 13:36:03 Found 1 DVD±RW/RAM!
I 13:37:05 Operation Started!
I 13:37:05 Source File: C:\Users\Kalynda\Videos\SWEET TREATS DVD 2018\SWEET TREATS DVD 2018.DVD
I 13:37:05 Source File Sectors: 3,514,128 (MODE1/2048)
I 13:37:05 Source File Size: 7,196,934,144 bytes
I 13:37:05 Source File Volume Identifier: My Movies
I 13:37:05 Source File Volume Set Identifier: 5B44493300000000
I 13:37:05 Source File Application Identifier: ASHAMPOO
I 13:37:05 Source File Implementation Identifier: ASHAMPOO
I 13:37:05 Source File File System(s): ISO9660, Joliet, UDF (1.02)
I 13:37:05 Destination Device: [0:0:0] hp DVDRW  UJ8G2A SGM1 (E:) (SATA)
I 13:37:05 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D03-64)
I 13:37:05 Destination Media Supported Write Speeds: 2.4x, 6x
I 13:37:05 Destination Media Sectors: 4,173,824
I 13:37:05 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes)
I 13:37:05 Write Mode: DVD
I 13:37:05 Write Type: DAO
I 13:37:05 Write Speed: MAX
I 13:37:05 DVD+R DL Reserve Track: No
I 13:37:05 Link Size: Auto
I 13:37:05 Lock Volume: Yes
I 13:37:05 Test Mode: No
I 13:37:05 OPC: No
I 13:37:05 BURN-Proof: Enabled
I 13:37:05 Write Speed Successfully Set! - Effective: 8,355 KB/s (6x)
I 13:37:05 Optimal L0 Data Zone Capacity: 1,757,072
I 13:37:05 Optimal L0 Data Zone Method: Copied From Original Disc
W 13:38:11 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error
E 13:38:18 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error
E 13:38:24 Operation Failed! - Duration: 00:01:13
I 13:38:24 Average Write Rate: N/A - Maximum Write Rate: N/A
 
Link to comment
Share on other sites

Yes, if I had to hazard a guess, I'd say your most likely cause is you're using CMC Magnetics media.  CMC makes the worst media out there.  It's cheap and plentiful for a reason.  It causes probably more than half of the problems we see on this board.

 

 

Try Verbatim DataLife Plus media.  NOT Life Media you find in stores.  DataLife Plus is only found online.  As far as double layer DVD media goes, Verbatim is, pretty much, the gold standard.  And it's really the only reliable blanks for that purpose, although I've had good results with TDK's discs.

Link to comment
Share on other sites

I AM USING THE VERBATIM DATALIFE PLUS dvd+ DISCS...

Not according to the disc MID. CMC MAG-D03-64

 

That's the cheap crap life series made by CMC magnetics. Real verbatim uses either MKM or MCC at the beginning

 

Verstuurd vanaf mijn Nexus 7 met Tapatalk

Link to comment
Share on other sites

so could this be because of the DVD that was originally Read and saved to comp, and then trying to burn to the new DVD? i know for a fact the DVDs im using are verbatim... i just opened the pack!

Link to comment
Share on other sites

I AM USING THE VERBATIM DATALIFE PLUS dvd+ DISCS... 

 

 

No, you're probably not.  You're probably using the Life Series if they said Verbatim on them.  I told you to use the DataLife Plus series, not the Life Series which you will find in stores.  Life Series is CMC.  Even Verbatim farms out to crap CMC.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.