Jump to content

Problem with verifying and semaphore


BlizzardUK

Recommended Posts

I have a external BD-R burner, and I am having a lot of problems with verifying, this doesn't just happen with BD-Rs, but in the last 2 times today that has been what has happened. Any ideas what it could be ? I have a Windows 10 PC. It keeps just cutting out and going on about Semaphore, it doesn't happen at the same time so I am fairly sure it isn't the discs, especially as it has happened with CD-audio discs as well as blu-rays. 

I 16:58:00 ImgBurn Version 2.5.8.0 started!
I 16:58:00 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200)
I 16:58:00 Total Physical Memory: 16,735,172 KiB  -  Available: 5,999,440 KiB
I 16:58:00 Initialising PTRobot...
I 16:58:01 PT_SDK Version 1.8.1.0
I 16:58:01 Initialising SPTI...
I 16:58:01 Searching for Auto Loader devices...
I 16:58:01 -> Auto Loader 1 - Info: Disc Publisher II 1.43 03/19/2008
I 16:58:01 Found 1 Auto Loader!
I 16:58:01 Searching for SCSI / ATAPI devices...
I 16:58:01 -> Drive 1 - Info: PIONEER BD-RW   BDR-206D 1.06-ID61 (O:) (SATA)
I 16:58:01 -> Drive 2 - Info: PIONEER DVD-RW  DVR-112D 9.15 (Q:) (USB 2.0)
I 16:58:02 -> Drive 3 - Info: ATAPI eHBU312   2 VL16 (T:) (USB 2.0)
I 16:58:02 -> Drive 4 - Info: DVDFab Virtual Drive 1.1 (N:) (SCSI)
I 16:58:02 Found 1 DVD±RW, 1 BD-ROM/HD DVD-ROM and 2 BD-REs!
I 16:58:50 Operation Started!
I 16:58:50 Source File: F:\Downloads\Mike 2019\March 2019\Put to Disc\Disc1.nrg
I 16:58:50 Source File Sectors: 11,524,384 (MODE1/2048)
I 16:58:51 Source File Size: 23,601,938,432 bytes
I 16:58:51 Source File Volume Identifier: Disc1
I 16:58:51 Source File Volume Set Identifier: 4E7A2148B185DEB7
I 16:58:51 Source File Implementation Identifier: Nero
I 16:58:51 Source File File System(s): UDF (1.02)
I 16:58:51 Destination Device: [0:0:0] ATAPI eHBU312   2 VL16 (T:) (USB)
I 16:58:51 Destination Media Type: BD-R (Disc ID: RITEK-BR3-000)
I 16:58:51 Destination Media Supported Write Speeds: 4x, 6x, 8x, 10x
I 16:58:51 Destination Media Sectors: 12,219,392
I 16:58:51 Write Mode: BD
I 16:58:51 Write Type: DAO
I 16:58:51 Write Speed: 8x
I 16:58:51 Hardware Defect Management Active: No
I 16:58:51 BD-R Verify Not Required: Yes
I 16:58:51 Link Size: Auto
I 16:58:51 Lock Volume: Yes
I 16:58:51 Test Mode: No
I 16:58:51 OPC: No
I 16:58:51 BURN-Proof: Enabled
I 16:58:52 Write Speed Successfully Set! - Effective: 35,960 KB/s (8x)
I 16:59:22 Filling Buffer... (204 MiB)
I 16:59:24 Writing LeadIn...
I 16:59:26 Writing Session 1 of 1... (1 Track, LBA: 0 - 11524383)
I 16:59:26 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11524383)
I 17:11:21 Synchronising Cache...
I 17:11:25 Closing Track...
I 17:11:26 Finalising Disc...
I 17:12:07 Exporting Graph Data...
I 17:12:07 Graph Data File: C:\Users\jonuk\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_eHBU312_2_VL16_27-MARCH-2019_16-58_RITEK-BR3-000_8x.ibg
I 17:12:07 Export Successfully Completed!
I 17:12:07 Operation Successfully Completed! - Duration: 00:13:16
I 17:12:07 Average Write Rate: 32,281 KiB/s (7.4x) - Maximum Write Rate: 35,717 KiB/s (8.1x)
I 17:12:07 Cycling Tray before Verify...
W 17:12:14 Waiting for device to become ready...
I 17:12:29 Device Ready!
I 17:12:33 Operation Started!
I 17:12:33 Source Device: [0:0:0] ATAPI eHBU312   2 VL16 (T:) (USB)
I 17:12:33 Source Media Type: BD-R (Disc ID: RITEK-BR3-000)
I 17:12:33 Source Media Supported Read Speeds: 1x, 2x, 4x, 6x, 8x
I 17:12:33 Source Media Supported Write Speeds: 4x, 6x, 8x, 10x
I 17:12:33 Source Media Sectors: 11,524,384
I 17:12:33 Source Media Size: 23,601,938,432 bytes
I 17:12:33 Image File: F:\Downloads\Mike 2019\March 2019\Put to Disc\Disc1.nrg
I 17:12:33 Image File Sectors: 11,524,384 (MODE1/2048)
I 17:12:33 Image File Size: 23,601,938,432 bytes
I 17:12:33 Image File Volume Identifier: Disc1
I 17:12:33 Image File Volume Set Identifier: 4E7A2148B185DEB7
I 17:12:33 Image File Implementation Identifier: Nero
I 17:12:33 Image File File System(s): UDF (1.02)
I 17:12:33 Read Speed (Data/Audio): MAX / MAX
I 17:12:34 Read Speed - Effective: 3.2x - 8x
I 17:12:34 Verifying Session 1 of 1... (1 Track, LBA: 0 - 11524383)
I 17:12:34 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 11524383)
W 17:26:30 Failed to Read Sectors 9962560 - 9962591 - Reason: The semaphore timeout period has expired.
W 17:26:30 Waiting for device to become ready...
W 17:26:30 Device Removal Detected!
W 17:26:30 The device list will be refreshed at the next available opportunity.
W 17:27:49 Device Removal Detected!
W 17:27:49 The device list will be refreshed at the next available opportunity.
I 17:27:56 Abort Request Acknowledged
E 17:27:56 Failed to Verify Sectors!
I 17:27:57 Exporting Graph Data...
I 17:27:57 Graph Data File: C:\Users\jonuk\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_eHBU312_2_VL16_27-MARCH-2019_16-58_RITEK-BR3-000_8x.ibg
I 17:27:57 Export Successfully Completed!
E 17:27:57 Operation Aborted! - Duration: 00:15:23
I 17:27:57 Average Verify Rate: 21,634 KiB/s (4.9x) - Maximum Verify Rate: 32,974 KiB/s (7.5x)
E 17:28:02 CreateFile Failed! - Device: '\\?\usbstor#cdrom&ven_atapi&prod_ehbu312___2&rev_vl16#2010121000200000011&0#{53f56308-b6bf-11d0-94f2-00a0c91efb8b}'
E 17:28:02 Reason: The system cannot find the file specified.
I 17:28:02 Searching for Auto Loader devices...
I 17:28:02 -> Auto Loader 1 - Info: Disc Publisher II 1.43 03/19/2008
I 17:28:02 Found 1 Auto Loader!
I 17:28:02 Searching for SCSI / ATAPI devices...
I 17:28:02 -> Drive 1 - Info: PIONEER BD-RW   BDR-206D 1.06-ID61 (O:) (SATA)
I 17:28:02 -> Drive 2 - Info: PIONEER DVD-RW  DVR-112D 9.15 (Q:) (USB 2.0)
I 17:28:02 -> Drive 3 - Info: DVDFab Virtual Drive 1.1 (N:) (SCSI)
I 17:28:02 Found 1 DVD±RW, 1 BD-ROM/HD DVD-ROM and 1 BD-RE!
W 17:28:21 Device Arrival Detected!
I 17:28:21 Searching for Auto Loader devices...
I 17:28:23 -> Auto Loader 1 - Info: Disc Publisher II 1.43 03/19/2008
I 17:28:23 Found 1 Auto Loader!
I 17:28:23 Searching for SCSI / ATAPI devices...
I 17:28:23 -> Drive 1 - Info: PIONEER BD-RW   BDR-206D 1.06-ID61 (O:) (SATA)
I 17:28:24 -> Drive 2 - Info: PIONEER DVD-RW  DVR-112D 9.15 (Q:) (USB 2.0)
I 17:28:24 -> Drive 3 - Info: ATAPI eHBU312   2 VL16 (T:) (USB 2.0)
I 17:28:24 -> Drive 4 - Info: DVDFab Virtual Drive 1.1 (N:) (SCSI)
I 17:28:24 Found 1 DVD±RW, 1 BD-ROM/HD DVD-ROM and 2 BD-REs!
I 17:29:21 Operation Started!
I 17:29:21 Source Device: [0:0:0] ATAPI eHBU312   2 VL16 (T:) (USB)
I 17:29:21 Source Media Type: BD-R (Disc ID: RITEK-BR3-000)
I 17:29:21 Source Media Supported Read Speeds: 1x, 2x, 4x, 6x, 8x
I 17:29:21 Source Media Supported Write Speeds: 4x, 6x, 8x, 10x
I 17:29:21 Source Media Sectors: 11,524,384
I 17:29:21 Source Media Size: 23,601,938,432 bytes
I 17:29:21 Image File: F:\Downloads\Mike 2019\March 2019\Put to Disc\Disc1.nrg
I 17:29:21 Image File Sectors: 11,524,384 (MODE1/2048)
I 17:29:21 Image File Size: 23,601,938,432 bytes
I 17:29:21 Image File Volume Identifier: Disc1
I 17:29:21 Image File Volume Set Identifier: 4E7A2148B185DEB7
I 17:29:21 Image File Implementation Identifier: Nero
I 17:29:21 Image File File System(s): UDF (1.02)
I 17:29:21 Read Speed (Data/Audio): MAX / MAX
I 17:29:22 Read Speed - Effective: 3.2x - 8x
I 17:29:22 Verifying Session 1 of 1... (1 Track, LBA: 0 - 11524383)
I 17:29:22 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 11524383)
W 17:34:15 Failed to Read Sectors 2592800 - 2592831 - Reason: The semaphore timeout period has expired.
W 17:34:15 Waiting for device to become ready...
W 17:34:15 Device Removal Detected!
W 17:34:15 The device list will be refreshed at the next available opportunity.
 

Link to comment
Share on other sites

Generally, semaphore time issues are a plague of external drives.  They're caused by a conflict between the USB to SATA bridge in the unit and the controller on your motherboard.  The only solution that tends to work is to get a different drive.  Or replace your motherboard, but that's using a bazooka to swat a fly.  Since you said this happens on CD-R and BD-R, as you said, you can pretty much rule out the discs.  So, I wouldn't necessarily blame the Ritek BD-R's you're using.  Although Ritek media can cause all kinds of compatibility problems with drives.  If your CD-R are also Ritek or CMC, you could try getting some Verbatim BD-R or DataLifePlus/AZO CD-R.  (NOT the Life Series you find in stores.  They're CMC junk.)  However, I doubt that would help, but it would definitely pin down it's not the media you're using if you try with the best and get the same result.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.